Supermicro BMB-CMM-002 Bedienungsanleitung

Supermicro Regler BMB-CMM-002

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Supermicro BMB-CMM-002 (64 Seiten) in der Kategorie Regler. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/64
Web-based Management Utility
For the SuperBlade® System
User’s Manual
Revison 1.0b
Web-based Management Utility User’s Manual
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. Please Note: For the most up-to-date version of this manual, please see
our web site at www.supermicro.com.
Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software, if any, and documentation
may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or
machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further
details.
Manual Revison 1.0b
Release Date: January 7, 2013
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.
Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2011 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER
REPRODUCTIVE HARM.
iii
Preface
About this Manual
This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the use of
Supermicro's Web-based Management Utility.
Manual Organization
Chapter 1: Introduction
The first chapter provides an introduction about the Web-based Management Utility.
Chapter 2: Blade System
This chapter covers the menu options and controls for the Blade System menu.
Chapter 3: Virtual Media
This chapter covers the menu options and controls for the Virtual Media menu.
Chapter 4: System Health
This chapter covers the menu options and controls for the System Health menu.
Chapter 5: User Management
This chapter covers the menu options and controls for the User Management menu.
Chapter 6: KVM Settings
This chapter covers the menu options and controls for the KVM Settings menu.
Chapter 7: Device Settings
This chapter covers the menu options and controls for the Device Settings menu.
Chapter 8: Maintenance
This chapter covers the menu options and controls for the Maintenance menu.
Chapter 8: Remote Console
This chapter covers the use of the Remote Console.


Produktspezifikationen

Marke: Supermicro
Kategorie: Regler
Modell: BMB-CMM-002

Brauchst du Hilfe?

Wenn Sie Hilfe mit Supermicro BMB-CMM-002 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Regler Supermicro

Bedienungsanleitung Regler

Neueste Bedienungsanleitung fĂĽr -Kategorien-