Sunbeam Pro Steam SR4310 Bedienungsanleitung

Sunbeam Eisen Pro Steam SR4310

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sunbeam Pro Steam SR4310 (12 Seiten) in der Kategorie Eisen. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
PRO STEAM
IRONS
User Guide
SR4110
SR4210
SR4310
This book covers the use and care of the following Sunbeam Irons:
SR4110 Pro Steam® Glide Iron
SR4210 Pro Steam® Teflon® Iron
SR4310 Pro Steam® Teflon® Pro Iron
Contents
Sunbeam’s Safety Precautions 3
Features of your Pro Steam Iron 4
Using your Pro Steam Iron 6
Care and Cleaning 8
Ironing Tips and Tricks 9
Ironing Chart 10
Sunbeam is very safety conscious when designing
and manufacturing consumer products, but it is
essential that the product user also exercise care
when using an electrical appliance. Listed below are
precautions which are essential for the safe use of
an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove by
grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord
unless this cord has been checked and tested by
a qualified technician or service person.
• Always use your appliance from a power outlet of
the voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
• Children should be supervised to ensure that they
do no play with the appliance.
• The temperature of accessible surfaces may be
high when the appliance is operating.
• Never leave an appliance unattended while
in use.
• Do not use an appliance for any purpose other
than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch any
hot surface.
• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination, repair
or adjustment.
• For additional protection, Sunbeam recommend
the use of a residual current device (RCD)
with a tripping current not exceeding 30mA in
the electrical circuit supplying power to your
appliances.
• Do not immerse the appliance in water or any
other liquid unless recommended.
• Appliances are not intended to be operated
by means of an external timer or separate remote
control system.
• This appliance is intended to be used in
household and similar applications such as: staff
kitchen areas in shops, offices and other working
environments; farm houses; by clients in hotels,
motels and other residential type environments;
bed and breakfast type environments.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR IRON
• Do not leave a hot iron within reach of children.
If they come into contact with a hot iron it could
lead to serious burns.
• Iron only on an ironing board.
• An iron takes approximately 30 minutes to cool
down. Allow the iron to cool completely before
storing.
• Do not wind the cord around the soleplate while
the iron is still hot.
• Do not leave the iron unattended while it is
plugged into the power outlet.
• Always unplug the iron from the power outlet
before filling or emptying the water tank.
• The iron must be used and rested on a stable
surface.
• When placing the iron on its heel, ensure that the
surface on which the stand is placed is stable.
• The iron is not to be used if it has been dropped,
if there are any visible signs of damage or if it is
leaking.
3


Produktspezifikationen

Marke: Sunbeam
Kategorie: Eisen
Modell: Pro Steam SR4310

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sunbeam Pro Steam SR4310 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Eisen Sunbeam

Bedienungsanleitung Eisen

Neueste Bedienungsanleitung für -Kategorien-