Sun Joe SWJ701E Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Sun Joe SWJ701E (72 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war fĂźr 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/72
Š 2021 by Snow JoeŽ, LLC
All rights reserved. Original instructions.
1
SAVE THESE INSTRUCTIONS
EN
A Division of Snow Joe
ÂŽ, LLC Model SWJ701E Form No. SJ-SWJ701E-MR6
R
OPERATORâS MANUAL
ELECTRIC CHAIN SAW
18-INCH | 14-AMP
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all the instructions contained in this manual. Keep this
manual in a safe place, so that the information is available at
all times. If you give the equipment to another person, make
sure to provide these operating instructions. Basic safety
precautions should always be followed to reduce the risk of
îre, electric shock and personal injury.
Notice the personal safety alert symbol m used in this
manual to draw your attention to a given along WARNING
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION and
AWARENESS.
Intended use
This machine was designed and manufactured for
felling, bucking, and delimbing trees or cutting wooden
objects with dimensions suitable for the cutting bar's
capabilities.
Improper use
Any other use diîĄering from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Examples of improper use
include, but are not limited to:
⢠Trimming hedges;
⢠Carving;
⢠Sectioning pallets, crates and various packing materials;
⢠Sectioning furniture or other materials with nails, screws or
other metal components;
⢠Butchering meat;
⢠Using the machine to lift, move or split objects;
⢠Using the machine while fastened to îxed supports.
Improper use of the machine will invalidate the warranty,
relieve the manufacturer from all liabilities, and the user will
consequently be liable for any and all damage or injury to
himself/herself or others.
General Safety
mWARNING! When using electric yard tools, basic safety
precautions should always be followed to reduce the risk of
îre, electric shock, and personal injury, including the following:
1. Keep guards in place â Protective guards should be
checked periodically to ensure they are properly îtted and
in correct working order.
2. Remove adjusting keys and wrenches â Check that
adjusting wrenches are removed from the saw before
turning it on.
3. Keep work area clean and well-lit â Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
4. Avoid dangerous conditions â Do not use this machine
in rainy, stormy, damp or wet locations. Do not operate the
unit in gaseous or explosive atmospheres. Motors in these
units normally spark, and the sparks may ignite fumes.
5. Do not use the chain saw in the rain.
6. Keep bystanders and children away â All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
7. Do not force the tool â It will do the job eîĄectively and
safely if it is used at the rate for which it was designed.
8. Use the right tool â Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
9. Wear proper apparel â Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footwear, and close-îtting clothing is
recommended when working outdoors with power tools.
10. Wear protective hair coverings to contain long hair.
11. Always wear safety glasses and ear defenders to
provide eye and ear protection â Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
12. Wear face or dust masks â If the cutting operation is
dusty, the use of a face or dust mask specially designed
to îlter out microscopic particles is recommended.
13. Do not overreach â Keep proper footing and balance
at all times.
14. Maintain tools with care â Keep tools sharp and clean
for the best and safest performance. Follow instructions
for lubricating and changing accessories.
2
15. Disconnect the chain saw from the Disconnect tool â
power supply when not in use, before servicing, when
transporting, or when changing the chain or other
accessories.
16. Reduce the risk of unintentional starting â Make sure
the switch is in the OFF position before plugging the tool
into a power source.
17. Use recommended accessories â Consult the ownerâs
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
18. Check for damaged parts â Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts, and any other conditions that
may aîĄect the tool's operation.
19. Never leave tool unattended while it is running â Turn
the power OFF by removing the power cord directly from
its socket. Do not leave the saw until the cutting bar
comes to a complete stop.
20. Avoid unintentional starting â Do not carry the chain saw
with your înger on the switch.
21. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw â Be sure to
encase the cutting bar in its protective sheath when not
in use.
22. Stay alert â Watch what you are doing. Use common
sense. Do not operate the chain saw when you are tired.
23. Store idle tool indoors â When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
mWARNING! Some dust and debris created by the
use of the tool could contain chemicals known to the State
of California to cause cancer and birth defects or other
reproductive harm. Some examples of these chemicals are:
⢠Chemicals in fertilizers
⢠Compounds in insecticides, herbicides, and pesticides
⢠Arsenic and chromium from chemically treated lumber
Your risk from exposure to these chemicals varies, and
depends on how often you do this type of work. To reduce
your exposure, work in a well-ventilated area and with
approved safety equipment, such as dust masks that are
specially designed to îlter out microscopic particles.
Chain Saw Use And Care
Save all warnings and instructions for future reference. The
term âpower toolâ in the warnings refers to your electric chain
saw.
mWARNING! Turn oîĄ the power switch and disconnect
the power source before adjusting, inspecting, servicing
or cleaning the power tool, when changing accessories or
when any other dangerous conditions present themselves.
All maintenance tasks should be performed after the power
tool's rotating parts have stopped completely. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
1. Do not force the power tool. Use the correct power tool
for your application. The correct power tool will perform
better with less likelihood of personal or mechanical
damage if it is used at the rate for which it was designed.
2. Do not use the power tool if the switch does not turn it on
and oîĄ. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
3. Disconnect the unit from the power source before making
any adjustments, changing accessories, or storing the
power tool. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
4. Store idle power tools indoors in a dry, locked place
out of the reach of children. Do not allow anyone who is
unfamiliar with the power tool or these instructions access
to the machine. Power tools are dangerous in the hands of
untrained users.
5. Maintain power tools with care to ensure safe operation
and optimal performance. Keep handles dry, clean and
free from oil and grease. Check for misalignment or
obstruction of moving parts, breakage of parts and any
other condition that may aîĄect the power toolâs operation.
If damage is found, have the power tool repaired before
use. Many accidents are caused by poorly maintained
power tools.
6. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
become jammed and are easier to control.
7. Use the power tool and accessories in accordance with
these instructions, and be sure to take into account the
working conditions and the work to be performed. Using
the power tool for operations other than those intended
could result in a hazardous situation.
8. Moving parts present risks. Keep your face, hair, clothing,
hands and feet away from all moving parts. All guards
and safety attachments must be installed properly before
using the power tool. Shut oîĄ and disconnect the battery
before touching any parts other than the handles and the
switch.
3
Electrical safety
1. Ground fault circuit interrupter (GFCI) protection should
be provided on the circuit(s) or outlet(s) to be used for
this electric chain saw. Receptacles are available having
built-in GFCI protection and may be used for this
measure of safety.
2. Make sure that the mains voltage matches that listed on
the unit's rating label. Using the improper voltage can
damage the motor and injure the user.
3. To prevent electric shock, use only with an extension cord
suitable for outdoor use, such as SW-A, SOW-A, STW-A,
STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.
Before use, check that the extension cord is in good
condition. When using an extension cord, make sure to
use one heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
4. To reduce the risk of electric shock, this appliance has a
polarized plug (i.e. one blade is wider than the other). Use
this appliance only with a polarized UL-, CSA- or ETL-
listed extension cord recommended for outdoor,
all-weather use.
The appliance plug will ît into a polarized extension
cord only one way. If the appliance plug does not ît
fully into the extension cord, reverse the plug. If the plug
still does not ît, obtain a correct polarized extension
cord. A polarized extension cord will require the use of a
polarized wall outlet. The extension cord plug will ît into
the polarized wall outlet only one way. If the plug does
not ît fully into the wall outlet, reverse the plug. If the plug
still does not ît, contact a qualiîed electrician to install
the proper wall outlet. Do not modify the appliance plug,
extension cord receptacle or extension cord plug in any
way.
5. To prevent the appliance cord from disconnecting from
the extension cord during operation, use the on-board
extension cord restraint hook and/or make a knot as
shown in Table 1.
6. Do not abuse the cord. Never pull the chain saw by the
cord or yank the cord to disconnect it from the receptacle.
Keep the cord away from heat, oil and sharp edges.
Double-Insulated Appliances
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means are
provided on a double-insulated appliance, nor should a means
for grounding be added to the appliance. Servicing a double-
insulated appliance requires extreme care and knowledge
of the system, and should be performed only by qualiîed
service personnel at an authorized Snow JoeÂŽ + Sun JoeÂŽ
dealer. Replacement parts for a double-insulated appliance
must be identical to the parts they replace. A double-insulated
appliance is marked with the words âDouble Insulationâ or
âDouble Insulated.â The symbol (square within a square)
may also be marked on the appliance.
DOUBLE-INSULATED: GROUNDING NOT
REQUIRED. WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS.
m WARNING m
Electric shock may cause SEVERE INJURY or
DEATH. Heed these warnings:
⢠Do not allow any part of the electric chain saw to
make contact with water while it is in operation. If the
appliance becomes wet while turned oîĄ, wipe dry
before starting.
⢠Use only a UL-, CSA-, or ETL-rated extension cord
for outdoor, all-weather use.
⢠Do not use an extension cord over 100 ft (30 m).
⢠Do not touch the appliance or its plug with wet hands
or while standing in water. Wearing rubber boots
oîĄers some protection.
EXTENSION CORD CHART
Extension Cord
Length
Wire Gauge (A.W.G.):
Up to 50 ft
(15 m)
+50 ft - 100 ft
(+15 m - 30 m)
14 12
(B) Connect plug and receptacle
Cord set Appliance cord
(A) Tie cord as shown
Table 1. Method of Securing Extension Cord
Produktspezifikationen
| Marke: | Sun Joe |
| Kategorie: | Säge |
| Modell: | SWJ701E |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sun Joe SWJ701E benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Säge Sun Joe
18 Mai 2024
23 April 2024
23 März 2024
21 März 2024
4 März 2024
31 Januar 2024
14 Januar 2024
13 Januar 2024
9 Januar 2024
29 Dezember 2023
Bedienungsanleitung Säge
- Säge Panasonic
- Säge Cotech
- Säge Makita
- Säge Bosch
- Säge Parkside
- Säge Vonroc
- Säge AEG
- Säge Powerfix
- Säge Black And Decker
- Säge Cocraft
- Säge FERM
- Säge Ryobi
- Säge Skil
- Säge Trotec
- Säge Hilti
- Säge Bort
- Säge DeWalt
- Säge Einhell
- Säge Elu
- Säge Festool
- Säge Mafell
- Säge Triton
- Säge Worx
- Säge Tacklife
- Säge Hikoki
- Säge Hitachi
- Säge Hyundai
- Säge Hazet
- Säge Kress
- Säge Metabo
- Säge Stanley
- Säge Kärcher
- Säge Atika
- Säge Gßde
- Säge Power Craft
- Säge Scheppach
- Säge BÊbÊ Confort
- Säge Workzone
- Säge Meec Tools
- Säge Dremel
- Säge Fieldmann
- Säge King Craft
- Säge Proxxon
- Säge Westfalia
- Säge Remington
- Säge Husqvarna
- Säge Stihl
- Säge Chicago Pneumatic
- Säge Dedra
- Säge Graphite
- Säge Snow Joe
- Säge Silverline
- Säge Holzmann
- Säge Sthor
- Säge Florabest
- Säge Hecht
- Säge Herkules
- Säge Stiga
- Säge Ford
- Säge Zipper
- Säge Yato
- Säge Baumr-AG
- Säge Greencut
- Säge Genesis
- Säge Evolution
- Säge Dolmar
- Säge Bavaria
- Säge Milwaukee
- Säge Narex
- Säge Toolcraft
- Säge Fein
- Säge AL-KO
- Säge Gardena
- Säge Craftsman
- Säge Defort
- Säge Powerplus
- Säge Alpha Tools
- Säge Martha Stewart
- Säge McCulloch
- Säge Ozito
- Säge Yard Force
- Säge Draper
- Säge Solo
- Säge Texas
- Säge Ridgid
- Säge Porter-Cable
- Säge Hobart
- Säge Guede
- Säge Dexter Power
- Säge Felisatti
- Säge Gardenline
- Säge Grizzly
- Säge Homelite
- Säge HURRICANE
- Säge Plantiflor
- Säge Qualcast
- Säge Shindaiwa
- Säge Sterwins
- Säge Tanaka
- Säge Troy-Bilt
- Säge Meister Craft
- Säge Sovereign
- Säge Challenge
- Säge Challenge Xtreme
- Säge Truper
- Säge MacAllister
- Säge RIKON
- Säge Pro-Cut
- Säge Selion
- Säge Kreg
- Säge Proviel
- Säge Merox
- Säge Bullcraft
- Säge XU1
- Säge MTM
- Säge Urrea
- Säge EFA
- Säge MyTool
- Säge Ergotools Pattfield
- Säge IKRA
- Säge FIXIT
- Säge Bavaria By Einhell
- Säge Rona
- Säge Donau Elektronik
Neueste Bedienungsanleitung fĂźr -Kategorien-
14 August 2024
7 August 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024