Sun Joe ION100V-10PS-CT Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sun Joe ION100V-10PS-CT (80 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/80
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions.
1
SAVE THESE INSTRUCTIONS
EN
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
Model iON100V-10PS-CT Form No. SJ-iON100V-10PS-CT-880E-MR1
CORDLESS POLE CHAIN SAW
– CORE TOOL
100-VOLT MAX* | 10-INCH
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not followed, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not followed, could result in minor or moderate injury.
General Safety
mWARNING! When using cordless yard tools, basic safety
precautions should always be followed to reduce the risk of re,
electric shock and personal injury, including the following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly tted and
in correct working order.
2. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
3. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
4. Do not use the pole chain saw in the rain.
5. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
6. Do not force the tool – It will do the job eectively and
safely if it is used at the rate for which it was designed.
7. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
8. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footware and close-tting clothing is
recommended when working outdoors with power tools.
9. Wear protective hair coverings to contain long hair.
10. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
11. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to lter out microscopic particles is recommended.
12. Do not overreach – Keep proper footing and balance
at all times.
13. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
14. Disconnect tool – Turn o the power switch and remove
the battery when it is not in use, before servicing, when
transporting or when changing the chain or
other accessories.
15. Reduce the risk of unintentional starting – Make sure
the safety button and the On/O switch are in the OFF
position before inserting the battery in the unit. Do not
carry the pole chain saw with the safety button and the
On/O switch engaged.
16. Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
17. Check for damaged parts – Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts and any other conditions that
may aect the tool's operation.
18. Never leave tool unattended while it is running – Turn
the power OFF by removing the battery from the unit.
Do not leave the saw until the cutting bar comes to a
complete stop.
19. Avoid unintentional starting – Do not carry the pole
chain saw with your nger on the switch.
20. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure
to encase the cutting bar in its protective sheath when
not in use.
21. Stay alert – Watch what you are doing. Use common
sense. Do not operate the pole chain saw when you
are tired.
22. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
2
Specic Safety Rules For
Pole Chain Saws
mWARNING! To protect yourself from SHOCK HAZARD!
electrocution, do not operate the pole chain saw within
50 ft (15 m) of overhead wires. Failure to follow this instruction
could result in severe personal injury.
mWARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
battery-operated (cordless) power tool.
Before using
1. Study this manual thoroughly.
2. Familiarize yourself with the operation of the pole chain
saw and learn to use it properly.
3. Never permit others (especially children) who have not
read the manual to use the machine.
4. If the unit must be given to other people, give them
this manual.
5. Never remove the labels or security elements.
6. Do not use the pole chain saw if the On/O switch does
not work properly. If necessary, contact your dealer for
any repair.
7. Never expose the pole chain saw to rain or moisture.
Never allow water or other liquids to enter the machine.
8. Check the oil level before each use of the pole chain saw.
Never use the pole chain saw without oil in the tank or
when the amount of oil is low.
9. Check the condition of the chain guide, chain, fasteners
and safety button before each use. Replace excessively
worn or missing parts.
10. Do not start the pole chain saw if the sprocket cover is
not installed.
11. Do not cut near other electrical machines.
12. Do not operate the pole chain saw in an environment with
ammable materials such as liquids, gases or dust. The
sparks generated by the operation of the machine can
cause an explosion.
13. Do not start cutting until the work area is cleared and
cleaned. Keep the work area clean and tidy to reduce the
risk of an accident.
14. For the rst use, it is recommended that the user be
accompanied by an experienced person.
When using
1. Use the pole chain saw only in daylight or good
articial light.
2. The use of power equipment can be regulated. Remember
to comply with legal regulations which may dier from one
location to another.
3. Do not use the pole chain saw if you are tired or ill. Also
avoid using if you have consumed alcohol or taken drugs.
A moment of inattention can result in serious injury.
4. When using, keep your hair away from the machine.
Never wear loose clothing or accessories such as
neckties, cords, scarves or jewelry that could get caught
in the machine or in the cutting system.
5. Wear close-tting clothing to help protect you from cuts.
Always wear long pants, sturdy non-slip shoes and
protective equipment such as gloves, goggles, a helmet
with a visor and an acoustic shield.
6. Do not allow anyone to remain in the range of the pole
chain saw during use. Keep people, children and animals
away from the work area. If conducting group work, keep
sucient distance between people.
7. Make sure that the handles are clean and dry. When the
pole chain saw is running, always rmly grip the front
handle with your left hand and the rear handle with your
right hand.
8. Always maintain a stable, balanced and rm
standing during operation. Do not work on slippery
or unstable ground.
9. Firmly hold the pole chain saw with both hands. Put
yourself in a position that allows you to withstand the
forces applied by a backlash. Never let go of the machine.
10. Always start sawing with the moving chain running.
11. Do not saw with the tip of the saw guide bar.
12. During cutting, some tension on the wood may be
released suddenly and cause springbacks or
hazardous releases.
13. Never operate a damaged machine.
14. Do not overload the machine.
mWARNING! To reduce the time of exposure to vibration
and noise, it is preferable to use the machine with frequent
breaks and limit the duration of continuous work.
mWARNING! The vibration level during actual use of the
tool can dier depending upon how the tool is used.
3
After using
1. Always remove the battery from the tool before performing
any checks or maintenance.
2. When carrying the tool, make sure the battery has been
removed from its housing and the cutting chain has
completely stopped. Hold the tool by the rear handle
and soft grip with the guide bar (encased in its protective
sheath) turned away from you.
3. Always follow the instructions provided for maintenance.
After each use, check the operation of safety devices,
setting, tension and condition of parts. Replace worn or
damaged parts.
4. Repairs to this cordless pole chain saw should be
performed only by qualied personnel. For safety reasons,
use only original spare parts approved by Snow Joe® +
Sun Joe®.
5. Keep the pole chain saw clean and dry. Store it away from
direct sunlight and out of the reach of children.
6. Keep this manual and consult it whenever you use
the machine.
Kickback
mWARNING! Kickback may occur when the nose or tip
of the guide bar touches an object, or when the wood closes in
and pinches the saw chain in the cut.
AVOID CONTACTING THE GUIDE BAR TIP WITH ANY
OBJECT. In some cases, when the tip makes contact with an
object, it may cause a fast reverse reaction, kicking the guide
bar up and back towards the operator. Pinching the saw chain
along the top of the guide bar may also push the guide bar
rapidly back towards the operator. Either of these reactions
may cause you to lose control of the cordless pole chain saw,
which could result in serious personal injury.
• Kickback safety devices on this cordless pole chain saw
include a skip chain and a low kickback guide bar. These
will reduce, but not entirely prevent, kickbacks. Follow the
necessary precautions indicated in this operator's manual
to avoid kickbacks.
• Always use two hands when operating the pole chain saw,
one hand gripping the trigger and the other hand gripping
the pole. Use a rm grip. Thumbs and ngers must wrap
around the trigger and the pole.
• Keep all guards in place on the pole chain saw. Make sure
they are in proper working order.
• Do not overreach or extend arms above shoulder height.
• Keep solid footing and balance at all times.
• Never try cutting through two branches at the same time.
Only cut one at a time.
• Do not bury the guide bar nose or try to cut by boring the
guide bar nose into the wood.
• Watch for shifting of wood or other forces that may pinch
the chain.
• Use extreme caution when re-entering a previous cut.
• Use the low-kickback chain and guide bar supplied with
this pole chain saw. Only use genuine Snow Joe® +
Sun Joe® replacement parts designed specically for use
with this pole chain saw.
• Never use a dull or loose chain. Keep the chain sharp with
proper tension.
Pole Chain Saw Trimming Precautions
• Never stand directly under the limb you are trimming.
Always position yourself outside the path of falling debris.
• Never stand on a ladder or other type of unstable support
while using the pole chain saw.
• Keep all handles and grip surfaces clean, dry, and free
from oil and grease.
• Always use both hands to operate the pole chain saw.
Keep a rm, steady pressure on the pole chain saw while
cutting, but do not try to cut limbs larger in diameter than
the length of the guide bar.
• Keep other people and pets away from the cutting end of
the pole chain saw and at a safe distance away from the
work area.
• Do not use the pole chain saw near cable, electric power
or telephone lines. Maintain a minimum clearance of
50 ft (15 m) from all power lines.
Produktspezifikationen
| Marke: | Sun Joe |
| Kategorie: | Säge |
| Modell: | ION100V-10PS-CT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sun Joe ION100V-10PS-CT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Säge Sun Joe
18 Mai 2024
23 April 2024
23 März 2024
21 März 2024
4 März 2024
31 Januar 2024
14 Januar 2024
13 Januar 2024
9 Januar 2024
29 Dezember 2023
Bedienungsanleitung Säge
- Säge Panasonic
- Säge Cotech
- Säge Makita
- Säge Bosch
- Säge Parkside
- Säge Vonroc
- Säge AEG
- Säge Powerfix
- Säge Black And Decker
- Säge Cocraft
- Säge FERM
- Säge Ryobi
- Säge Skil
- Säge Trotec
- Säge Hilti
- Säge Bort
- Säge DeWalt
- Säge Einhell
- Säge Elu
- Säge Festool
- Säge Mafell
- Säge Triton
- Säge Worx
- Säge Tacklife
- Säge Hikoki
- Säge Hitachi
- Säge Hyundai
- Säge Hazet
- Säge Kress
- Säge Metabo
- Säge Stanley
- Säge Kärcher
- Säge Atika
- Säge Güde
- Säge Power Craft
- Säge Scheppach
- Säge Bébé Confort
- Säge Workzone
- Säge Meec Tools
- Säge Dremel
- Säge Fieldmann
- Säge King Craft
- Säge Proxxon
- Säge Westfalia
- Säge Remington
- Säge Husqvarna
- Säge Stihl
- Säge Chicago Pneumatic
- Säge Dedra
- Säge Graphite
- Säge Snow Joe
- Säge Silverline
- Säge Holzmann
- Säge Sthor
- Säge Florabest
- Säge Hecht
- Säge Herkules
- Säge Stiga
- Säge Ford
- Säge Zipper
- Säge Yato
- Säge Baumr-AG
- Säge Greencut
- Säge Genesis
- Säge Evolution
- Säge Dolmar
- Säge Bavaria
- Säge Milwaukee
- Säge Narex
- Säge Toolcraft
- Säge Fein
- Säge AL-KO
- Säge Gardena
- Säge Craftsman
- Säge Defort
- Säge Powerplus
- Säge Alpha Tools
- Säge Martha Stewart
- Säge McCulloch
- Säge Ozito
- Säge Yard Force
- Säge Draper
- Säge Solo
- Säge Texas
- Säge Ridgid
- Säge Porter-Cable
- Säge Hobart
- Säge Guede
- Säge Dexter Power
- Säge Felisatti
- Säge Gardenline
- Säge Grizzly
- Säge Homelite
- Säge HURRICANE
- Säge Plantiflor
- Säge Qualcast
- Säge Shindaiwa
- Säge Sterwins
- Säge Tanaka
- Säge Troy-Bilt
- Säge Meister Craft
- Säge Sovereign
- Säge Challenge
- Säge Challenge Xtreme
- Säge Truper
- Säge MacAllister
- Säge RIKON
- Säge Pro-Cut
- Säge Selion
- Säge Kreg
- Säge Proviel
- Säge Merox
- Säge Bullcraft
- Säge XU1
- Säge MTM
- Säge Urrea
- Säge EFA
- Säge MyTool
- Säge Ergotools Pattfield
- Säge IKRA
- Säge FIXIT
- Säge Bavaria By Einhell
- Säge Rona
- Säge Donau Elektronik
Neueste Bedienungsanleitung für -Kategorien-
14 August 2024
7 August 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024