Sun Joe 24V-DD-CT Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sun Joe 24V-DD-CT (52 Seiten) in der Kategorie bohren. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/52
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
EN
A Division of Snow Joe
®, LLC Model 24V-DD-CT Form No. SJ-24V-DD-CT-880E-MR2
R
OPERATOR’S MANUAL
CORDLESS DRILL/DRIVER – TOOL ONLY
24-VOLT MAX* | 2-SPEED
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
mWARNING! When using the drill/driver basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury. These include:
Work Area Safety
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe
distance away from the work area.
3.
Do not operate power tools in explosive atmospheres –
Such as in the presence of ammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
Electrical Safety
1 Power tool plugs must match the outlet. Never modify .
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet conditions – Water
entering a power tool will increase the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
Personal Safety
1. Stay alert – Watch what you are doing. Use common
sense. Do not operate the drill/driver when you are tired,
or under the inuence of alcohol or drugs.
2. Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid unintentional starting – Do not carry the drill/driver
with your nger on the trigger. Make sure the switch is o
before connecting the drill/driver to power source.
4. Do not overreach – Keep proper footing and balance at
all times. Proper footing and balance enable better control
of the cordless drill/driver in unexpected situations.
5. Use personal protective equipment – Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
6. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. – Use of dust collection
can reduce dust-related hazards.
7. Do not use on a ladder or unstable support –
Stable footing on a solid surface enables better control of
the power tool in unexpected situations.
Tool Use and Care
1. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
2. Donotusedrill/driverifswitchdoesnotturnonoro
– The drill/driver that cannot be controlled with the switch
is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or
battery pack from the drill/driver before making any
adjustments, changing accessories, or storing the
drill/driver – Such preventive safety measures reduce risk
of starting the power tool accidentally.
4. Store idle drill/driver out of reach of children or other
untrained persons – Drill/driver is dangerous in the hands
of untrained users.
5. Maintain cordless drill/driver – Check for misalignment
or binding of moving parts, breakage of parts, and any
other condition that may aect the drill/driver's operation.
If damaged, have the drill/driver serviced before using.
Many accidents are caused by poorly maintained tools.
2
6. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed – Use of the power tool for operations dierent
from those intended could result in a hazardous situation.
Battery Tool Use and Care
1. Rechargeonlywiththechargerspeciedbythe
manufacturer – A charger that is suitable for one type
of battery pack may create a risk of re when used with
another battery pack.
2. Charge internal battery at ambient temperatures
between 50ºF – 104ºF (10ºC – 40ºC).
3.
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs,
ushwithwater.Ifliquidcontactseyes,seekmedicalhelp
– Liquid ejected from the battery may cause irritation or burns.
4. Usepowertoolsonlywithspecicallydesignated
battery packs – Use of any other battery packs may
create a risk of injury and re.
5. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another – Shorting the
battery terminals together may cause burns or a re.
Service
1. If your power tool requires service, contact an
authorized Snow Joe® + Sun Joe® dealer or call the
Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563) – Only identical
replacement parts should be utilized for repairs. This will
ensure that the safety of the power tool is maintained.
2. If the battery charger cable is damaged, it must be
immediately replaced to avoid a hazard – Contact
the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
Safety Rules for Cordless
Drill/Driver
1. Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring – Cutting accessory
contacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an
electric shock.
2. Know your power tool. Read operator’s manual
carefully. Learn its applications and limitations, as well
asthespecicpotentialhazardsrelatedtothispower
tool – Following this rule will reduce the risk of electric
shock, re, or serious injury.
3. Make sure approved eye protection is being worn
and properly adjusted and secured at all times the
drill/driver is being used – There is a possibility that
small pieces of metal could shear o from over-tightened
screws while using the tool.
4. Protect your lungs. Wear a face or dust mask if the
operation is dusty – Following this rule will reduce the
risk of serious personal injury.
5. Protect your hearing. Wear hearing protection during
extended periods of operation – Following this rule will
reduce the risk of serious personal injury.
6. Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories – Following this rule will reduce the risk of
electric shock, re, or serious personal injury.
7.
Donotplacebatterytoolsortheirbatteriesnearreor
heat – This will reduce the risk of explosion and possibly injury.
8. Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow – A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
9. Batteries can explode in the presence of a source
of ignition, such as a pilot light – To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open ame. An exploded battery can
propel debris and chemicals. If exposed, ush with water
immediately.
10. Do not charge battery tool in a damp or wet location –
Following this rule will reduce the risk of electric shock.
Battery + Charger
Safety Instructions
NOTE: This unit is the tool only. The battery and the charger
are not included. They must be purchased separately.
Model 24V-DD-CT is compatible with the iON+ 24V System
batteries and chargers. See page 14 for more information.
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery pack can cause cell damage.
IMPORTANT! Analyses conrm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.
mWARNING! Use only approved replacement batteries;
other batteries may damage the cordless drill/driver and cause
it to malfunction, which can lead to serious personal injury.
3
mCAUTION! To reduce the risk of injury, charge the
iON+ 24V lithium-ion battery pack only in its designated
iON+ 24V lithium-ion charger. Other types of chargers present
risk of re, personal injury and damage. Do not wire a battery
pack to a power supply plug or car cigarette lighter. Such
misuse will permanently disable or damage the battery pack.
• Avoid dangerous environments – Do not charge the
battery pack in rain, snow or in damp or wet locations.
Do not use the battery pack or charger in the presence of
explosive atmospheres (gaseous fumes, dust or ammable
materials) because sparks may be generated when inserting
or removing the battery pack, which could lead to a re.
• Charge in a well-ventilated area – Do not block the
charger vents. Keep them clear to allow for proper
ventilation. Do not allow smoking or open ames near a
charging battery pack. Vented gases may explode.
NOTE: The safe temperature range for the battery is
41°F – 105ºF (5°C – 40.5°C). Do not charge the battery
outside in freezing weather; charge it at room temperature.
• Maintain charger cord – When unplugging the charger, pull
the plug, not the cord, from the receptacle to reduce the
risk of damage to the electrical plug and cord. Never carry
the charger by its cord or yank it by the cord to disconnect
it from the receptacle. Keep the cord away from heat, oil
and sharp edges. Make sure the cord will not be stepped
on, tripped over or subjected to damage or stress when the
charger is in use. Do not use the charger with a damaged
cord or plug. Replace a damaged charger immediately.
•
Do not use an extension cord unless it is absolutely
necessary – Using the wrong, damaged or improperly
wired extension cord poses a risk of re and electric shock.
If an extension cord must be used, plug the charger into a
properly wired 16 gauge or larger extension cord with the
female plug matching the male plug on the charger. Make
sure that the extension cord is in good electrical condition.
• Use only recommended attachments – Use of an
attachment not recommended or sold by the battery
charger or battery pack manufacturer may result in risk of
re, electric shock or personal injury.
• Unplug charger when not in use – Make sure to remove
battery packs from unplugged chargers.
mWARNING!
To reduce the risk of electric shock,
always unplug the charger before performing any cleaning or
maintenance. Do not allow water to ow into the charger. Use a
Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards.
•
Do not burn or incinerate battery packs – Battery packs
may explode, causing personal injury or damage. Toxic fumes
and materials are created when battery packs are burned.
•
Do not crush, drop or damage battery packs – Do not use
the battery pack or charger if they have sustained a sharp blow,
been dropped, run over or have been damaged in any way (i.e.
pierced with a nail, hit with a hammer, stepped on, etc.).
• Do not disassemble – Incorrect reassembly may pose
a serious risk of electric shock, re or exposure to toxic
battery chemicals. If the battery or charger are damaged,
contact an authorized Snow Joe® + Sun Joe® dealer or
call the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
•
Battery chemicals cause serious burns – Never let a
damaged battery pack contact the skin, eyes or mouth. If a
damaged battery pack leaks battery chemicals, use rubber or
neoprene gloves to safely dispose of it. If skin is exposed to
battery uids, wash the aected area with soap and water and
rinse with vinegar. If eyes are exposed to battery chemicals,
immediately ush with water for 20 minutes and seek medical
attention. Remove and dispose of contaminated clothing.
•
Do not short circuit – When battery pack is not in use, keep
it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting
the battery terminals together may cause burns or a re.
•
Store your battery pack and charger in a cool, dry place –
Do not store the battery pack or charger where temperatures
may exceed 105ºF (40.5ºC), such as in direct sunlight or
inside a vehicle or metal building during the summer.
Information about the battery
1. For optimum battery performance, avoid low discharge
cycles by charging the battery pack frequently.
2. Store the battery pack in a cool place, ideally at 77°F
(25°C) and charged fully.
3. Lithium-ion batteries are subject to a natural aging
process. The battery pack must be replaced at the latest
when its capacity falls to just 80% of its capacity when
new. Weakened cells in an aged battery pack are no
longer capable of meeting the high power requirements
needed for the proper operation of your cordless drill/
driver, and therefore pose a safety risk.
4. Do not throw battery packs into an open re as this poses
a risk of explosion.
5. Do not ignite the battery pack or expose it to re.
6.
Do not exhaustively discharge batteries. Exhaustive
discharge will damage the battery cells. The most common
cause of exhaustive discharge is lengthy storage or non-
use of partially discharged batteries. Stop working as soon
as the performance of the battery falls noticeably or the
electronic protection system triggers. Place the battery
pack in storage only after it has been fully charged.
7. Protect batteries and the tool from overloads. Overloads
will quickly result in overheating and cell damage inside
the battery housing even if this overheating is not
apparent externally.
8.
Avoid damage and shocks. Immediately replace batteries
that have been dropped from a height of more than 3 feet
(1 meter) or those that have been exposed to violent shocks,
even if the housing of the battery pack appears to be
undamaged. The battery cells inside the battery may have
suered serious damage. In such instances, please read the
waste disposal information for proper battery disposal.
9. If the battery pack suers overloading and overheating,
the integrated protective cuto will switch o the
equipment for safety reasons.
IMPORTANT! Do not press the ON/OFF switch any more
if the protective cut-o has been activated. This may
damage the battery pack.
Produktspezifikationen
| Marke: | Sun Joe |
| Kategorie: | bohren |
| Modell: | 24V-DD-CT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sun Joe 24V-DD-CT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung bohren Sun Joe
15 Oktober 2024
9 August 2024
24 Juli 2024
14 Juli 2024
13 Juli 2024
4 Juli 2024
Bedienungsanleitung bohren
- bohren Basetech
- bohren Panasonic
- bohren Clas Ohlson
- bohren Cotech
- bohren Makita
- bohren Bosch
- bohren Flex
- bohren Laserliner
- bohren Parkside
- bohren Vonroc
- bohren AEG
- bohren Velleman
- bohren Powerfix
- bohren Black And Decker
- bohren Cocraft
- bohren FERM
- bohren Ryobi
- bohren Skil
- bohren Topcraft
- bohren Trotec
- bohren Maestro
- bohren Baier
- bohren Carat
- bohren Eibenstock
- bohren Hilti
- bohren Bort
- bohren DeWalt
- bohren Einhell
- bohren Elu
- bohren Festool
- bohren Mafell
- bohren Maktec
- bohren Worx
- bohren Luxor
- bohren Hikoki
- bohren Hitachi
- bohren Hyundai
- bohren Hazet
- bohren Kinzo
- bohren Kress
- bohren Max
- bohren Metabo
- bohren Stanley
- bohren Würth
- bohren Güde
- bohren Power Craft
- bohren Scheppach
- bohren Workzone
- bohren Biltema
- bohren Meec Tools
- bohren Dremel
- bohren Fieldmann
- bohren EcoMAC
- bohren Proxxon
- bohren Westfalia
- bohren Dedra
- bohren DURO
- bohren Graphite
- bohren Silverline
- bohren Holzmann
- bohren MSW
- bohren Huvema
- bohren Robust
- bohren Zipper
- bohren Stomer
- bohren Yato
- bohren Baumr-AG
- bohren Genesis
- bohren BluCave
- bohren Toolland
- bohren Delta
- bohren Batavia
- bohren Bavaria
- bohren Brüder Mannesmann
- bohren Milwaukee
- bohren Narex
- bohren Toolcraft
- bohren Fein
- bohren Verto
- bohren Craftsman
- bohren Powerplus
- bohren Rupes
- bohren ProfiTech
- bohren Alpha Tools
- bohren Ozito
- bohren Kawasaki
- bohren Ridgid
- bohren Porter-Cable
- bohren VARO
- bohren Duro Pro
- bohren Economy
- bohren Fe Powertools
- bohren Gamma
- bohren Global
- bohren Goon
- bohren Lux Tools
- bohren Max Bahr
- bohren Protool
- bohren Spit
- bohren Steren
- bohren Tanaka
- bohren Meister Craft
- bohren Malmbergs
- bohren Truper
- bohren RIKON
- bohren Kreg
- bohren G-Technology
- bohren Einhell Bavaria
- bohren Powerblade
- bohren Rok
- bohren Tryton
- bohren MyTool
- bohren McKenzie
- bohren Rodcraft
- bohren Ribimex
- bohren Black Decker
- bohren RUKO
- bohren Handwerk
- bohren Stalco
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024