Strong SRT ANT100 Bedienungsanleitung

Strong TV-Antenne SRT ANT100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Strong SRT ANT100 (10 Seiten) in der Kategorie TV-Antenne. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
User Manual
Active Outdoor DVB-T/T2 Antenna
SRT ANT100
30 Sep 2021 19:52
Subject to alterations. In consequence of continuous research and development technical specications, design and appearance of products may
change. LTE is a trademark of ETSI, all other product names are trademarks or registered trademarks of their respective owners.
© STRONG 2021. All rights reserved.
TABLE OF CONTENTS
1.0 INTRODUCTION 2
2.0 PACKAGE CONTENTS 2
3.0 SAFETY NOTES 4
4.0 CONNECTING THE ANTENNA 4
4.1 To power the antenna with digital terrestrial receiver 5
4.2 To power the antenna with external power adapter 7
5.0 INSTALLATION OF THE ANTENNA 9
1
1.0 INTRODUCTION
Thank you for purchasing the STRONG SRT ANT100 DVB-T/T2 antenna. This antenna has been
specially designed to receive digital terrestrial signals. It can be connected to any Digital Terrestrial
Receiver (DVB-T/ T2) and is specially designed for outdoor use. The antenna housing is weather-proof
sealed. With the supplied multi-functional mounting material, you can install the antenna on any pole
outside the house.
This DVB-T/T2 antenna is an Active type antenna; it has a built-in low noise amplier that amplies
the received signal for better performance. The antenna therefore needs 5 V power supplied by your
terrestrial receiver, or by an AC/DC adapter (supplied with the antenna).
We recommend that you carefully read this user manual before you install the antenna. This will help
you to get the best performance of your antenna.
Specications
Frequency range: UHF 470 ~ 862 MHz
Active Antenna Gain: Max. 16 dBi for UHF
RF Output Impedance: 75 Ohm
Power Supply: 5 V DC / 45 mA via ANTENNA connector of the digital terrestrial
receiver or
2 powering methods: 5 V DC / 1 mA via External 230 V AC to DC adapter with power
injector (included)
Special features:
Choice of installation method: pole-mounted installation
Outdoor UHF 16-18 dB TV Antenna for DVB-T/T2 signals reception
Compatible with DVB-T/T2 receivers supporting active antenna output (5V)*
External 5G/4G LTE lter included for better reception
Integrated high gain amplier for optimal signal strength and performance
Low V.S.W.R
Compatible with horizontal and vertical polarizations
2-way mounting
U mounting system, 20 meters RG6 Coaxial cable, 5V inserter for a quick and easy installation
Durable and weather resistant
Excellent reception also in harsh environment
Extremely compact size
*In case 5 V is not supported by the receiver, a power adaptor (included) is required.
2.0 PACKAGE CONTENTS
Fig. 1
Outdoor TV Antenna with integrated amplier
1. Mount system
2. 5G/4G Filter SRTANT20
3. Short coax cable
4. IEC type male to F type female fast connector
5. Inserter
6. 20 m Black RG6 coaxial cable with IEC male and F-connector
7. 5V Adapter (USB)
2


Produktspezifikationen

Marke: Strong
Kategorie: TV-Antenne
Modell: SRT ANT100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Strong SRT ANT100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung TV-Antenne Strong

Bedienungsanleitung TV-Antenne

Neueste Bedienungsanleitung für -Kategorien-