StarTrac E-TR Treadmill Bedienungsanleitung

StarTrac Heimtrainer E-TR Treadmill

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr StarTrac E-TR Treadmill (7 Seiten) in der Kategorie Heimtrainer. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
STAR TRAC FITNESSTM
E Series Treadmill
Install Guide
UNPACKING
Remove all parts from the shipping crate and verify that the following parts were included in your shipment:
Description Qty.
Installation Instructions E-TR & E-TRx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Tie Strap, 14* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screw, Truss Head, #10-24 x 3/4* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Screw, Pan Head, M4x.7, 19mm* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Frame Assembly w/ Motor Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Top Rail with Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Neck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Side Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Screw, Button Head Socket Cap, 1/4”-28 UNC x 3/8”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Screw, Socket Head Cap, 5/16”-18 UNC x 1.0”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Bolt, Socket Head Cap, 5/16”-18 UNC x 3.0”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Washer, Flat, 5/16” I.D. x 1.2” O.D.* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Washer, Split Lock, 5/16”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Hex (Allen) key, 1/4”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hex (Allen) key, 5/32”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screwdriver, Phillips, #2* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screwdriver (blade-tip), 3/32”* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Owner’s Manual with Warranty Registration Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
*Part of included STAR TRAC tool kit.
**E-TRe & E-TRxe models will have embedded touch screen and surrounding plastics packaged separately.
Should any component not be present or if you have any operational questions, please call Star Trac’s Customer Care department at
(800) 503-1221 or USA 1-714-669-1660. Specifically refer to your treadmill serial number and model number listed below:
Serial No._________________________________________________________________________
Model No._________________________________________________________________________
NOTE: The following assembly procedure applies to the E SERIES Treadmills.
ASSEMBLY
The following tools are required for assembly: Hex (Allen) Key, 1/4”; Hex (Allen) Key, 5/32”; Screwdriver, Phillips. To assemble your
STAR TRAC E SERIES TREADMILL, just follow these steps.
NOTE: Don’t fully tighten bolts and screws until all parts are assembled.
1. Unpacking and Positioning the Frame Assembly
Remove all the packaging material so the treadmill is sitting, ready for
assembly, on the shipping crate platform. With a helper, lift the tread-
mill frame assembly from the shipping crate platform and place it in
the location where it will be used. Make sure the unit is placed near a
power outlet.
Caution: The motor shroud end of the frame assembly is very heavy.
Two people may be needed to lift this end when moving the frame
assembly.
ASSEMBLY AND SETUP
STAR TRAC E SERIES TREADMILL Install Guide
2. Installing the Neck
2a) Pop out the Front Motor Shroud Cap from the Motor
Shroud and remove the Neck Grommet and set it aside.
2b) Remove the Motor Shroud by removing the (2) #10 Truss
head screws.
2c) Insert neck as shown and fasten with (2) 5/16-18 x 3.0”, (2)
5/16-18 x 1.0” socket head screws, (4) 5/16 washers and
(4) lock washers. DO NOT fully tighten yet.
2d) Route all cables through lower neck service opening into
motor compartment. Refer to CONNECTING THE
CABLES for cable routing and connection.
STAR TRAC E SERIES TREADMILL Install Guide
Step 2a & 2b
Step 2c
Step 2d
Screws
Motor Shroud
Screws
Motor Shroud
Cap


Produktspezifikationen

Marke: StarTrac
Kategorie: Heimtrainer
Modell: E-TR Treadmill

Brauchst du Hilfe?

Wenn Sie Hilfe mit StarTrac E-TR Treadmill benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Heimtrainer StarTrac

Bedienungsanleitung Heimtrainer

Neueste Bedienungsanleitung fĂĽr -Kategorien-