StarTech.com PEXMSATA3422 Bedienungsanleitung

StarTech.com Regler PEXMSATA3422

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für StarTech.com PEXMSATA3422 (21 Seiten) in der Kategorie Regler. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/21

Manual Revision: 01/02/2015

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

PEXMSATA3422

2x mSATA + 2x SATA PCIe SATA III 6Gbps

RAID Controller Card with HyperDuo

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction ............................................................................................ 1

Packaging Contents 1 .................................................................................................................................

System Requirements 1 .............................................................................................................................

Product Overview ..................................................................................1

Product Diagram 1 .......................................................................................................................................

LED and PIN Header LED 2 ........................................................................................................................

Installation ..............................................................................................2

mSATA SSD Installation 2 ...........................................................................................................................

Hardware Installation 3 ..............................................................................................................................

Driver Installation 3 ......................................................................................................................................

Management Utility Installation 5 ..........................................................................................................

Verifying Installation 7 ................................................................................................................................

Hard Drive Initialization ........................................................................8

Port Multiplier ........................................................................................9

Operation ................................................................................................9

RAID Conguration 9 ..................................................................................................................................

Administration Console Method 10 .........................................................................................................

HyperDuo Conguration 11 ........................................................................................................................

Card BIOS Method 12 ....................................................................................................................................

Administration Console Method 13 .........................................................................................................

HyperDuo Management 14 ........................................................................................................................

Specications 16 ..........................................................................................

Technical Support ..................................................................................17

Warranty Information ............................................................................ 17