Stanton T.92 USB Bedienungsanleitung

Stanton Plattenspieler T.92 USB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Stanton T.92 USB (16 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

T. 9 2 U S B

USER MANUAL

DIRECT DRIVE TURNTABLE

1. Read Instructions – All the safety and operating instructions should be

read before this product is operated.

2. Retain Instructions – The safety and operating instructions should be

retained for future reference.

3. Heed Warnings – All warnings on the appliance and in the operating

instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should be followed.

5. Water and Moisture – The appliance should not be used near water -

for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a

wet basement, or near a swimming pool, and the like.

6. Wall or Ceiling Mounting – The product should be mounted to a wall or

ceiling only as recommended by the manufacturer.

7. Heat – Appliance should be situated away from heat sources such as

radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.

8. Power Sources – This product should be operated only from the type of

power source indicated on the rating label. If you are not sure of the

type of power supply to your home, consult your product dealer or

local power company. For products intended to operate from battery

power, or other sources, refer the operating instructions.

9. Grounding or Polarization – This product may be equipped with a

polarized alternating-current line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

10. Power-Cord Protection – Power-supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or

against them, paying particular attention to the cord in

correspondence of plugs, convenience receptacles, and the point

where they exit from the appliance.

11. Cleaning - The appliance should be cleaned only as recommended by the

manufacturer. Clean by wiping with a cloth slightly damp with water.

Avoid getting water inside the appliance.

12. Non-use Periods – The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of time.

13. Object and Liquid Entry – Care should be taken so that objects do not

fall and liquids are not spilled into the enclosure through openings

14. Damage Requiring Service – The appliance should be serviced by

qualified service personnel when:

A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damage

15. Servicing –The user should not attempt any service to the appliance

beyond that described in the operating instructions. All other servicing

should be referred to qualified service personnel..

16. Ventilation – Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and to

protect it from overheating, and these openings must not be blocked or

covered. The openings should never be blocked by placing the product

on a bed, sofa, rug, or other similar surface. This product should not be

placed in a built-in installation such as a bookcase or rack unless

proper ventilation is the manufacturer’s instructions have been

adhered to.

17. Attachments – do not use attachments not recommended by the product

manufacturer as they may cause hazards.

18. Accessories – Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious injury to

a child or adult, and serious damage to the product. Use only with a

cart, stand, tripod, bracket, or table recommended by the manufacturer,

or sold with the product. Any mounting of the product should follow the

manufacturer’s instructions, and should use amounting accessory

recommended by the manufacturer.

19. Lightning – For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product due to lightning and

power-line surges.

20. Replacement Parts – When replacement parts are required, be sure

the service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other

hazards.

21. Safety Check – Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

22. This product is in compliance with EUWEEE regulations.

Disposal of end of life product should not be treated as

municipal waste. Please refer to your local regulations

for instructions on proper disposal of this product.

23. Carts and Stands – The appliance should be used only

with a cart or stand that is recommended by the

manufacturer. An appliance and cart combination should

be moved with care. Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart

combination to overturn.

24. WARNING: The mains plug is used as disconnect device, the

disconnect device shall remain readily operable.

25. This equipment is a Class II or double insulated electrical

appliance. It has been designed in such a way that it does

not require a safety connection to electrical earth.

CAUTION: To reduce the risk of electric shock, do not remove any cover.

No user-serviceable parts inside. Refer servicing to qualified service

p y.ersonnel onl

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the

presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important

operation and maintenance (servicing) instructions in the literature accompanying this appliance.

CAUTION: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet

unless the blades can be fully p p inserted to revent blade ex osure.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Thank you for purchasing the T.92 USB turntable from Stanton. The T.92 USB has been designed to allow easy transfer of vinyl records to CD or Mp3. The

T.92 USB is built upon Stanton's heritage of designing audiophile produc ing the T.92 USB please ts for the most discriminating listener. Before assembl

check to make sure the following items are included with the main unit in the carton.

 iZotope Installation CD

 AC cord

 RCA cable

 USB cable

 45 rpm adaptor

 Counter weight

 Platter

 Slipmat

 Cloth dust cover

 Instruction manual

 Stanton Cartridge pre-mounted on headshell

After confirming that all of the above parts are included in the box, its time to assemble the turntable.

1) Remove the platter from its protective wrapping and place on the spindle of the main unit.

2) Remove the slipmat from its protective wrapping and place on the platter.

3) Place the counter-weight on the back of the tonearm assembly.

1. Connect the power cord to an AC outlet.

2. Connect the RCA cable to the PHONO input of your mixer. You can also use a line input by setting the phono/line switch at the rear of the turntable to

Line.