Stabila LAX 600 G Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Stabila LAX 600 G (14 Seiten) in der Kategorie Laser-Nivelliergerät. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/14
How true pro's measure
LAX600series
Operating instructions
3x360°
LINES
LAX600series
2
en
Contents
Section Page
• 1. Intended use 3
• ty instructions for laser units 32.1 Safe
• 2.2 Safety instructions for the Li-ion battery pack 3
• 3. Unit components 4
• 4. Commissioning 5
• 4.1 Inserting and charging the battery 5
• 4.2 Switching the unit on 6
• 4.3 Commissioning without the levelling function 6
• 5. Functions 7
• 5.1 Selecting laser functions 7
• 5.2 Working with the receiver 7
• 6. LED indicators 8
• 7. Using the SWB10 bracket 9
• 8. Checking the accuracy 10
• 8.1 Vertical check 10
• 8.2 Horizontal check 11
• 8.3 Angle check 12
• 9. Technical data 13
LAX600series
3
en
1. Intended use
Congratulations on the purchase of your STABILA measuring tool.
STABILA laser units from the LAX600 series are simple to operate laser lines with three
360° laser lines for levelling in a horizontal and vertical direction, for transferring/creating
90° angles and for plumb lines.
The laser units have a sealed casing (IP65) for use on building sites.
They are self-levelling within a range of ¹4°.
The laser lines are pulsed, which makes it possible to work over greater distances using
a special STABILA line receiver. For more information refer to the operating instructions
for the line receiver.
The LAX600 series can only be operated with a 12V Li-Ion CAS System battery.
LAX600G:
Receivers must be suitable for green laser beams.
These operating instructions are valid for all devices from the LAX600 series.
The laser beams are only displayed in one colour.
If you still have questions aer reading the operating instructions,
you can obtain advice over the phone at any time:
+49/6346/309-0
Equipment and functions:
• Pulsed laser lines
• 1x360° horizontal laser line
• 2x360° vertical laser lines
• 90°angle in horizontal and vertical direction
• Plumb line laser function
• Manual mode
• 1/4" tripod socket
• Carrying case
• STABILA CAS – 12V Li-Power 2.0Ah battery – not included in every set
• SC30 charger, 12-18V, CAS system – not included in every set
LAX600G:
• Includes green laser beams to improve visibility with the naked eye.
2.2 Safety instructions for the Li-ion battery pack
Thoroughly read the safety instructions and operating instructions for the Li-ion battery
pack.
2.1 Safety instructions for laser units
In Class 2 laser units, your eyes are usually protected from accidental, short-term expo-
sure to the laser beam by the eyelid-closing reflex and/or the reflex reaction to turn
one’s head. If a laser beam hits your eye, deliberately close your eyes and move your
head out of the path of the beam. Do not look into the direct or reflected beam.
The STABILA laser goggles available for our laser units are not safety eyewear:
their function is to improve the visibility of the laser beam.
• Do not aim the laser beam directly at people!
• Avoid dazzling other people with the unit!
• Keep the unit out of the reach of children!
• If operating or adjustment equipment that has not been specied here is used, or
if the unit is not operated in the ways described here, this may result in hazardous
exposure to radiation!
LASER
2
LASER RADIATION
DO NOT STARE INTO BEAM
510 - 635 nm / <1mW
CLASS II LASER PRODUCT
CFR 1040.10 AND CFR 1040.11


Produktspezifikationen

Marke: Stabila
Kategorie: Laser-Nivelliergerät
Modell: LAX 600 G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Stabila LAX 600 G benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten