Ozito LCT-1805 Bedienungsanleitung
Ozito
Laser-Nivelliergerät
LCT-1805
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Ozito LCT-1805 (8 Seiten) in der Kategorie Laser-Nivelliergerät. Dieser Bedienungsanleitung war fĂźr 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
CROSS LINE
LASER LEVEL
8m Working Range
INSTRUCTION MANUAL
SPECIFICATIONS
Battery: 3V DC (2 x AA Battery)
Laser Power: Class 2, <1mW
Working Range: 8m
Laser Diode: 635nm
Accuracy: Âą0.5mm/m
Self-Levelling Range: Âą40
Weight: 0.2kg
LCT-1805
WHATâS IN THE BOX
Cross Line Laser Level
Tripod
Mounting Clamp
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries are covered
by a 12 month warranty. Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
⢠If the tool has been operated on a supply voltage other
than that speciďŹed on the tool.
⢠If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
⢠Failure to perform maintenance as set out within the
instruction manual.
⢠If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head OfďŹce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The beneďŹts provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0217
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. INSTALLING BATTERIES
1 On/Off &
Operating Mode Button
2 Auto Levelling Indicator Light
3 Laser Window
4 Automatic Levelling Switch
5 Battery Compartment
CROSS LINE LASER LEVEL WITH TRIPOD
1
2
3
4
5
612
13
14
8
7
9
10
11
The Cross Line Laser Level unit requires 2 x AA batteries to operate.
1 Remove the battery
compartment lid from the laser
unit using the tab at the top.
3 Place the bottom of the battery
lid into the recess in the laser
unit and push the lid tab down
to secure in place.
2 Insert 2 x AA batteries in the
correct direction indicated
by the embossing inside the
battery compartment.
a
b
WARNING! BEFORE INSTALLING BATTERIES, ENSURE
THE UNIT IS SWITCHED OFF, INCLUDING AUTOMATIC
LEVELLING SWITCH, TO PREVENT THE LASER FROM
OPERATING.
6 1/4â Tripod Mounting Plate
7 Spirit Level
8 Angle Adjusting Handle
9 Height Locking Knob
10 Tripod Legs
11 Leg Locking Levers
12 Tilt Locking Knob
13 Rotation Locking Knob
14 Height Adjustment Handle
2. USING THE TRIPOD 3. ADJUSTING THE TRIPOD
Adjusting the Height of the LaserAttaching the Laser to the Tripod
Adjusting the Angle of the Laser
Adjusting the Tilt of the Laser
The tripod allows you to set up the laser in a speciîżc position and easily
make adjustments to the height, angle and tilt of the unit.
1 Open up the 3 legs of the
tripod to stabilise the platform.
2 Align the 1/4â mount
at the base of the
laser unit with the 1/4â
screw at the top of the
tripod.
3 Rotate the laser unit clockwise
to fasten the unit to the
mounting plate securely.
Note: Make sure the laser is
pointing perpendicular to
the angle adjusting handle.
a
b
a
b
a
b
4 To remove the laser unit
from the mounting plate,
rotate the unit anti-
clockwise.
1 Extend the 3 legs of the tripod
by unlocking the leg locking
levers and raising the legs.
Note: Ensure the locking levers
are locked once desired
height is achieved to
secure the tripod.
2 To raise the laser further, wind
the height locking knob anti-
clockwise to loosen, then raise
the laser by winding the height
adjustment handle.
Note: Ensure the height locking
knob is secured after
adjusting, by rotating
clockwise.
1 Rotate the angle
adjusting handle anti-
clockwise to allow the
handle to move.
2 Adjust unit to the desired
angle using the handle, then
secure in place by rotating the
handle clockwise.
1 Loosen the tilt locking knob by
rotating anti-clockwise. Then
adjust the tilt angle and secure
in place again.
Rotating the Laser
1 Loosen the rotation locking
knob by rotating anti-
clockwise. Adjust unit by using
the angle adjusting handle.
Note: Secure in place after
adjusting, by turning the
rotation locking knob
clockwise.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Laser-Nivelliergerät |
| Modell: | LCT-1805 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito LCT-1805 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Laser-Nivelliergerät Ozito
16 März 2024
7 März 2024
5 Juli 2023
12 November 2022
21 Oktober 2022
Bedienungsanleitung Laser-Nivelliergerät
- Laser-Nivelliergerät Makita
- Laser-Nivelliergerät Bosch
- Laser-Nivelliergerät Laserliner
- Laser-Nivelliergerät Skil
- Laser-Nivelliergerät Trotec
- Laser-Nivelliergerät Einhell
- Laser-Nivelliergerät Silverline
- Laser-Nivelliergerät Brandson
- Laser-Nivelliergerät Milwaukee
- Laser-Nivelliergerät Craftsman
- Laser-Nivelliergerät Alpha Tools
- Laser-Nivelliergerät Stabila
- Laser-Nivelliergerät Zgonc
- Laser-Nivelliergerät Neo
- Laser-Nivelliergerät Klein Tools
- Laser-Nivelliergerät PLS
Neueste Bedienungsanleitung fĂźr -Kategorien-
21 Juni 2024
21 Juni 2024
24 April 2024
26 März 2024
25 März 2024
18 März 2024
12 März 2024
7 März 2024
4 März 2024
12 Februar 2024