Spektrum DXe Bedienungsanleitung

Spektrum ferngesteuertes Spielzeug DXe

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Spektrum DXe (1 Seiten) in der Kategorie ferngesteuertes Spielzeug. Dieser Bedienungsanleitung war für 60 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

DXe DSMX® Transmitter

SPM1000, SPMR1000

Instruction Manual | Bedienungsanleitung | Manuel d’utilisation | Manuale di Istruzioni

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product cor-

rectly can result in damage to the product, personal property and cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this

Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without

direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby,

LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual,

prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

WARNING AGAINST COUNTERFEIT PRODUCTS: Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality

Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit

products or products claiming compatibility with DSM

® or Spektrum technology.

NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of

the intended purpose and will not provide warranty service related thereto.

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:

NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.

CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.

WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of

superﬁcial injury.

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC.

For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product.

Meaning of Special Language

Age Recommendation: Not for children under 14 years. This is not a toy.

Pilot Safety Precautions and Warnings

• Always make sure all batteries are fully charged before ﬂying.

• Time ﬂights so you can ﬂy safely within the time allotted by your battery.

• Make sure all control surfaces correctly respond to transmitter controls

before ﬂying.

• Do NOT ﬂy a model near spectators, parking areas or any other area that

could result in injury to people or damage to property.

• Do NOT ﬂy during adverse weather conditions. Poor visibility, wind, moisture

and ice can cause pilot disorientation and/or loss of control of a model.

• When a ﬂying model does not respond correctly to controls, land the model

and correct the cause of the problem.

Battery and Charging Warnings

Failure to exercise caution while using this product and comply with the

following warnings could result in product malfunction, electrical issues,

excessive heat, FIRE, and ultimately injury and property damage.

• Read all safety precautions and literature prior to use of this product

• Never allow minors to charge battery packs

• Never drop charger or batteries

• Never attempt to charge damaged batteries

• Never attempt to charge a battery pack containing different types of batteries

• Never charge a battery if the cable has been pinched or shorted

• Never allow batteries or battery packs to come into contact with moisture at

any time

• Never charge batteries in extremely hot or cold places (recommended

between 50–80˚ F or 10–27˚ C) or place in direct sunlight

• Always disconnect the battery after charging, and let the charger cool

between charges

• Always inspect a new battery before charging

• Always terminate all processes and contact Horizon Hobby if the product

malfunctions

• Always keep batteries and charger away from any material that could be

affected by heat (such as ceramic and tile), as they can get hot

• Always end the charging process if the charger or battery becomes hot to

the touch or starts to change form (swell) during the charge process

Transmitter Control

1Antenna

2LED

3 Wireless Trainer Bind Button

4 Dual Rate Switch (2 pos switch)

Throttle/Aileron Stick (Throttle/Roll: Mode 1)

Elevator/Aileron Stick (Pitch/Roll Mode 2):

Throttle/Rudder Stick (Throttle/Yaw Mode 3):

Elevator/Rudder Stick (Pitch/Yaw Mode 4):

6Elevator Trim (Pitch Mode 2,4):

Throttle Trim (Mode 1,3)

7Aileron Trim (Roll Mode 1,2):

Rudder Trim (Yaw: Mode 3,4)

8Power Switch

9 Neck Strap Mount

10 Rudder Trim (Yaw: Mode 1, 2)

Aileron Trim (Roll Mode 3, 4):

Elevator/Rudder Stick (Pitch/Yaw Mode 1):

Throttle/Rudder Stick (Throttle/Yaw Mode 2):

Elevator/Aileron Stick (Pitch/Roll Mode 3):

Throttle/Aileron Stick (Throttle/Roll Mode 4):

12 Throttle Trim ( )Mode 2

Elevator Trim ( )Mode 1

13 Aux Switch (2 pos switch)

14 Flight Mode Switch (3 pos switch)

15 Flap Switch (3 pos switch)

16 Bind/Panic Button

17 Programming Port

18 Optional Lithium Ion Battery Charge Port

19 Battery Cover

20 Trainer Port

21 Motor/ Throttle Cut Switch (2 pos switch)

22 Handle

15 22

20 16

Transmitter and Receiver Binding

1. Lower the throttle to the lowest position and make sure the transmitter

is powered off.

2. Insert the bind plug into the BIND/DATA port.

3. Insert the ESC plug into the THRO port.

4. Connect the battery to ESC and turn on the ESC switch, if available. The

receiver’s LED will ﬂash rapidly when the receiver is ready to bind.

5. While pressing the Bind button, power on the transmitter.

6. Release the Bind button after the receiver’s LED stays illuminated. This

indicates the receiver is bound to the transmitter.

7. Remove the bind plug from the receiver.

3 4

Transmitter Programming

You can conﬁgure the DXe transmitter for different aircraft using the Spektrum™ interface cable.

1. Download the transmiter programming application from

SpektrumRC.com or from your mobile device (iOS or Android).

2. Power on the transmitter.

3. Open the transmiter programming application.

4. Connect the interface cable to the transmitter and mobile device.

5. Use the application to program the transmitter.

6. Press “Update” in the application to save the transmiter programming.

Mode Conversion

Adjust Stick Tension

Programming Conversion:

1. Download the DXe application from SpektrumRC.com or from your

mobile device (iOS or Android).

2. Power on the transmitter.

3. Open the DXe application.

4. Connect the interface cable to the transmitter and the device.

5. Use the application to program the Mode Change 1,2,3 or4.

6. Press “Update” in the application to save the programming.

Mechanical Conversion:

Mechanical conversion is required to change between Modes 1 and 2 or

between Modes 3 and 4. The mechanical conversion consists of the following

steps:

1. Change the Throttle Ratchet (A)

2. Adjust the Elevator Centering Screw (B)

Changing the Throttle Ratchet:

1. Disconnect the battery holder or optional battery from the transmitter

and set aside.

2. Remove the six Phillips head screws that secure the rear transmitter

case half.

3. Put the transmitter face down on a piece of foam or a towel and

remove the rear case.

NOTICE: Do not pull or disconnect any of the wires attached to the back

transmitter half or damage may result.

4. Locate the silver throttle friction straps on both gimbals. One strap (A)

engages a serrated section on the gimbal for a ratcheted throttle, while

the other strap engages the smooth section on the gimbal.

5. To change the throttle ratchet, loosen the throttle strap so it does not

touch the throttle gimbal. Tighten the opposite throttle strap to engage

the desired throttle ratchet.

Adjusting the Elevator Centering Screw

When changing between Modes 1 and 2, or between Modes 3 and 4, you

must adjust the elevator centering screw (B).

1. Hold the Elevator or Throttle stick in the full up or full down position

when you are adjusting the elevator centering screw. Holding the

gimbal stick reduces the load on the elevator centering mechanism and

makes it easier to adjust the centering screw.

2. Locate the gimbal where the elevator centering spring is engaged. Use

a Phillips screwdriver to tighten the elevator centering screw. Tightening

the screw will disengage the centering spring.

3. Using a Phillips screwdriver, loosen the opposite elevator centering

screw until the lever engages.

You can change transmitter modes among Modes 1, 2, 3 and 4. This conversion requires both a programming and a mechanical change.

Limited Warranty

What this Warranty Covers

Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product

purchased (the “Product”) will be free from defects in materials and workmanship

at the date of purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) cosmetic damage, (ii)

damage due to acts of God, accident, misuse, abuse, negligence, commercial use,

or due to improper use, installation, operation or maintenance, (iii) modiﬁcation of

or to any part of the Product, (iv) attempted service by anyone other than a Horizon

Hobby authorized service center, (v) Product not purchased from an authorized

Horizon dealer, (vi) Product not compliant with applicable technical regulations, or

(vii) use that violates any applicable laws, rules, or regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER

WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WAR-

RANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PAR-

TICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE

DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF

THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that

Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by

Horizon to be defective. Horizon reserves the right to inspect any and all Product(s)

involved in a warranty claim. Service or replacement decisions are at the sole dis-

cretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE

OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S

SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COM-

MERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED

IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER

THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBIL-

ITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed

the individual price of the Product on which liability is asserted. As Horizon has no

control over use, setup, ﬁnal assembly, modiﬁcation or misuse, no liability shall

be assumed nor accepted for any resulting damage or injury. By the act of use,

setup or assembly, the user accepts all resulting liability. If you as the purchaser or

user are not prepared to accept the liability associated with the use of the Product,

purchaser is advised to return the Product immediately in new and unused condi-

tion to the place of purchase.

Law

These terms are governed by Illinois law (without regard to conﬂict of law

principals). This warranty gives you speciﬁc legal rights, and you may also have

other rights which vary from state to state. Horizon reserves the right to change or

modify this warranty at any time without notice.

WARRANTY SERVICES

Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot provide warranty support

or service. Once assembly, setup or use of the Product has been started, you must

contact your local distributor or Horizon directly. This will enable Horizon to better

answer your questions and service you in the event that you may need any assis-

tance. For questions or assistance, please visit our website at www.horizonhobby.

com, submit a Product Support Inquiry, or call the toll free telephone number

referenced in the Warranty and Service Contact Information section to speak with a

Product Support representative.

Inspection or Services

If this Product needs to be inspected or serviced and is compliant in the country

you live and use the Product in, please use the Horizon Online Service Request

submission process found on our website or call Horizon to obtain a Return Mer-

chandise Authorization (RMA) number. Pack the Product securely using a shipping

carton. Please note that original boxes may be included, but are not designed to

withstand the rigors of shipping without additional protection. Ship via a carrier

that provides tracking and insurance for lost or damaged parcels, as Horizon is not

responsible for merchandise until it arrives and is accepted at our facility. An Online

Service Request is available at http://www.horizonhobby.com/content/_service-

center_render-service-center. If you do not have internet access, please contact

Horizon Product Support to obtain a RMA number along with instructions for

submitting your product for service. When calling Horizon, you will be asked to

provide your complete name, street address, email address and phone number

where you can be reached during business hours. When sending product into

Horizon, please include your RMA number, a list of the included items, and a brief

summary of the problem. A copy of your original sales receipt must be included for

warranty consideration. Be sure your name, address, and RMA number are clearly

written on the outside of the shipping carton.

NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with

a LiPo battery, please contact the appropriate Horizon Product Support

ofﬁce.

Warranty Requirements

For Warranty consideration, you must include your original sales receipt verifying

the proof-of-purchase date. Provided warranty conditions have been met, your

Product will be serviced or replaced free of charge. Service or replacement deci-

sions are at the sole discretion of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, service will be completed and pay-

ment will be required without notiﬁcation or estimate of the expense unless the ex-

pense exceeds 50% of the retail purchase cost. By submitting the item for service

you are agreeing to payment of the service without notiﬁcation. Service estimates

are available upon request. You must include this request with your item submitted

for service. Non-warranty service estimates will be billed a minimum of ½ hour of

labor. In addition you will be billed for return freight. Horizon accepts money orders

and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover

cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s

Terms and Conditions found on our website

http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in

the country of use and ownership. If received, a non-compliant

Product will not be serviced. Further, the sender will be

responsible for arranging return shipment of the un-serviced

Product, through a carrier of the sender’s choice and at the

sender’s expense. Horizon will hold non-compliant Product

for a period of 60 days from notiﬁcation, after which it will be

discarded.

Warranty and Service Contact Information

FCC Information

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable

regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range.

Antenna Separation Distance

When operating your Spektrum transmitter, please be sure to maintain a separation distance of at least 5 cm between your body (excluding

ﬁngers, hands, wrists, ankles and feet) and the antenna to meet RF exposure safety requirements as determined by FCC regulations.

The following illustrations show the approximate 5 cm RF exposure area and typical hand placement when operating your Spektrum

transmitter.

IC Information

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired operation

of the device.

Country of Purchase Horizon Hobby Contact Information Address

United States of America

Horizon Service Center

(Repairs and Repair Requests)

servicecenter.horizonhobby.com/Re-

questForm/

4105 Fieldstone Rd

Champaign, Illinois, 61822 USA

Horizon Product Support

(Product Technical Assistance)

www.quickbase.com/db/

bghj7ey8c?a=GenNewRecord

888-959-2304

Sales sales@horizonhobby.com

888-959-2304

United Kingdom Service/Parts/Sales:

Horizon Hobby Limited

sales@horizonhobby.co.uk Units 1–4 , Ployters Rd, Staple Tye

Harlow, Essex, CM18 7NS, United Kingdom

+44 (0) 1279 641 097

Germany Horizon Technischer Service service@horizonhobby.de Christian-Junge-Straße 1

25337 Elmshorn, GermanySales: Horizon Hobby GmbH +49 (0) 4121 2655 100

France Service/Parts/Sales:

Horizon Hobby SAS

infofrance@horizonhobby.com 11 Rue Georges Charpak

77127 Lieusaint, France+33 (0) 1 60 18 34 90

China Service/Parts/Sales:

Horizon Hobby – China

info@horizonhobby.com.cn Room 506, No. 97 Changshou Rd.

Shanghai, China 200060+86 (021) 5180 9868

FAA Information

Prior to ﬂying, contact your local or regional modeling organizations for guid-

ance and familiarize yourself with the current local rules and FAA regulations

governing model aviation in your location.

More information about model aviation can be found at

www.modelaircraft.org.

The Federal Aviation Administration can be found online at

www.faa.gov.

AMA National Model Aircraft Safety Code

http://www.modelaircraft.org/ﬁles/105.PDF

Horizon Hobby, LLC hereby declares that this product is in compliance with the essential requirements and other relevant

provisions of the R&TTE and EMC Directive.

A copy of the EU Declaration of Conformity is available online at: http://www.horizonhobby.com/content/support-render-compliance.

Instructions for disposal of WEEE by users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a designated

collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of

disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where

you can drop off your waste equipment for recycling, please contact your local city ofﬁce, your household waste disposal service or where you purchased the product.

EU COMPLIANCE STATEMENT:

1. Disconnect the battery holder or optional battery from the transmitter

and set aside.

2. Remove the six Phillips head screws that secure the rear transmitter

case half.

3. Put the transmitter face down on a piece of foam or a towel and

remove the rear case.

4. Tighten or loosen the screws a small amount using a small Phillips (C)

screwdriver.

NOTICE: Always do a test of stick tension while turning these screws to en-

sure stick tension is not too loose or too tight. Tightening a screw too much

can damage a spring. Loosening a screw too much can let a spring fall off

and cause short-circuit in the transmitter.

CAUTION: Always power off the transmitter, disconnect and remove

the battery before adjusting stick tension or friction straps. Not doing

so could result in property damage or injury.

CAUTION: If using rechargeable batteries, charge only rechargeable

batteries. Charging non-rechargeable batteries may cause the batter-

ies to burst, resulting in injury to persons and/or damage to property.

CAUTION: Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to national regulations.

Optional Lithium Ion Battery Pack

Installing the Transmitter Batteries

1. Remove battery cover from the back of the transmitter.

2. Remove the AA battery holder and disconnect from the

transmitter power port.

3. Remove the Rectangle shaped foam and ﬂat foam from the battery

compartment.

4. Connect the battery pack (SPMA9602) to the transmitter

power port.

5. Install the optional Lithium Ion battery pack into the

transmitter. Use care not to pinch the wires.

6. Install the battery cover.

CAUTION: Never connect an external battery charger to your DXe

transmitter.

CAUTION: Never leave a charging battery unattended.

CAUTION: Never charge a battery overnight.

1. Remove battery cover from the back of the transmitter.

2. Install 4 AA batteries into battery holder.

3. Install the battery cover.

Produktspezifikationen

Marke:	Spektrum
Kategorie:	ferngesteuertes Spielzeug
Modell:	DXe
Produkttyp:	Fernbedienung
Produktfarbe:	Schwarz
Akku-/Batterietechnologie:	Alkali
Eingebautes Display:	Nein
Anzahl Kanäle:	6 Kanäle
Frequenzband:	2.4 GHz
Vorgesehene Verwendung:	Airplane, Aircraft
Kompatibilität:	EN328