Spektrum DX 3.0 Bedienungsanleitung
Spektrum
Funkkommunikation
DX 3.0
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Spektrum DX 3.0 (40 Seiten) in der Kategorie Funkkommunikation. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/40
3-Channel, 4-Model Memory
DSM Racing System
®
®
2
Table of
Contents
Alternate Languages ....................................................................................................... 2
Introduction.................................................................................................................... 3
DX3.0 Quick Start Setup................................................................................................. 3
Direct Trim Access ......................................................................................................... 5
DX3.0 with Digital Spectrum Modulation ....................................................................... 6
Binding .......................................................................................................................... 6
Antenna .......................................................................................................................... 7
System Features ............................................................................................................. 8
R/C Safety Precautions................................................................................................... 8
Steering Tension Adjustment .......................................................................................... 8
Control Identification and Location ................................................................................ 9
Charging Jack .............................................................................................................. 10
Receiver Connections and Installation.......................................................................... 11
Servo Layout ................................................................................................................ 12
Key Input and Display .................................................................................................. 12
Display Screens ........................................................................................................... 13
Accessing the System Mode ........................................................................................ 14
Model Select (System Mode) ....................................................................................... 15
Model Name Entry (System Mode) .............................................................................. 15
Auxiliary Channel 3 (System Mode) ............................................................................. 16
Grip Button C (System Mode) ...................................................................................... 17
Data Reset (System Mode) ........................................................................................... 19
Copy Model Data (System Mode) ................................................................................ 19
Accessing the Function Mode ...................................................................................... 20
Throttle Deadband (Function Mode)............................................................................. 21
Exponential (Function Mode) ....................................................................................... 22
End-Point Adjust (Function Mode)............................................................................... 23
Programmable Mixing (Function Mode) ...................................................................... 24
Lap Timer (Function Mode) .......................................................................................... 25
Sub-Trim (Function Mode) ........................................................................................... 26
Servo Reversing (Function Mode) ................................................................................ 26
Accessing the Direct Trim Mode ................................................................................... 27
Steering Trim (STC) ..................................................................................................... 28
Throttle Trim (THC) ...................................................................................................... 29
Grip Lever B: Steering Dual Rate Trim Adjustment STG ................................................ 30
Grip Lever A: Brake Endpoint Adjustment BRG/
Channel 3 Access Brake Endpoint Adjustment ........................................ 31
Channel 3 Access (Fuel Mixture) ................................................................................. 32
Channel 3 Transmission Shift Selector (for vehicles with forward/reverse only) .......... 32
DX3.0 Data Sheet ......................................................................................................... 33
Warranty and Service Information ................................................................................ 36
FCC Information........................................................................................................... 37
ITALIAN: Per la versione italiana di questo manuale vi preghiamo di vistare il sito
www.spektrumrc.com
FRENCH: Pour consulter ce manuel en français, visiter le site www.spektrumrc.com
GERMAN: Zur Ansicht der Bedienunsanleitung in den Deutsch besuchen Sie bitte
www.spektrumrc.com
SPANISH: Para ver este manual en Español entra en www.spektrumrc.com
Alternate
Languages
3
Thank you for purchasing Spectrum’s DX3.0 radio system. The DX3.0 is designed to provide
R/C racers with a bulletproof 2.4GHz spread spectrum radio link. With the DX3.0 DSM
system you’ll no longer have to wait for a frequency clip, worry about radio interference from
noisy motors or ESCs or be concerned that someone may turn on a radio on your channel
causing interference. In addition, the DX3.0’s programming is user-friendly and offers the
most important features and functions that racers demand. It’s important that you carefully
read this manual before attempting to operate your DX3.0 system. For your convenience, a
blank data sheet has been included in the back of this manual. Once you have input all the
necessary data for a particular model, we recommend that you write that information down on
the data sheet provided. This insures that, in the rare case of a memory failure, you will not
lose your models’ setup data.
For those who would like to get out to the track quickly with just the basic radio setup, please
refer to the Quick Start section that follows.
Introduction
Included in this manual are in-depth instructions detailing all the steps and procedures
needed to program each of the DX3.0’s functions. For those racers who want to get to the
track fast, we have provided the Quick Start section below. Quick Start covers the basic
programming information necessary to get you racing right away.
Later, when you want to learn more about the specific functions of the DX3.0, refer to the
appropriate page(s) in this manual for more detailed programming information.
Note: If braking adjustment via Grip Dial A is required, refer to the third channel system
setup mode (page 31) for instructions.
Binding
It’s necessary to program the receiver to a specific transmitter so that the receiver will only
recognize that transmitter, ignoring signals from any other sources. If the receiver is not
bound to a transmitter, the system will not operate. Also, during the binding process, the
servo fail-safe positions are set.
1. Make sure the transmitter and receiver are turned off.
2. With the receiver off, press and hold the bind button on the receiver while turning on
the receiver.
3. Release the bind button when the LED flashes green.
4. With the transmitter off, Place the transmitter steering wheel, throttle trigger and
auxiliary channels in their desired fail-safe positions (normally brake and straight-
ahead steering).
5. Press and hold the bind button on the transmitter while turning on
the transmitter.
6. Release the bind button after the green LED flashes.
After several seconds the LED on the receiver and the LED on the transmitter will quit
flashing and remain solid, indicating that the binding process was successful. Once binding
is complete, the system will automatically connect.
Note: See page 5 for a detailed description of the binding process.
DX3.0 Quick
Start Setup
Produktspezifikationen
| Marke: | Spektrum |
| Kategorie: | Funkkommunikation |
| Modell: | DX 3.0 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Spektrum DX 3.0 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Funkkommunikation Spektrum
6 Juli 2024
6 Juli 2024
4 Juli 2024
Bedienungsanleitung Funkkommunikation
- Funkkommunikation Kenwood
- Funkkommunikation Motorola
- Funkkommunikation Furuno
- Funkkommunikation Simrad
- Funkkommunikation Icom
- Funkkommunikation President
- Funkkommunikation Team
- Funkkommunikation Albrecht
- Funkkommunikation Stabo
- Funkkommunikation GTV
- Funkkommunikation Intek
- Funkkommunikation Multi Care Systems
- Funkkommunikation Rexon
- Funkkommunikation Swissphone
- Funkkommunikation Vertex Standard
- Funkkommunikation Wintec
- Funkkommunikation Wouxun
- Funkkommunikation Baofeng
Neueste Bedienungsanleitung für -Kategorien-
21 September 2024
17 September 2024
26 August 2024
26 August 2024
26 August 2024
25 August 2024
25 August 2024
25 August 2024
22 August 2024
22 August 2024