Icom IC- F4260 Series Bedienungsanleitung
Icom
Funkkommunikation
IC- F4260 Series
Lesen Sie kostenlos die š deutsche Bedienungsanleitung fĆ¼r Icom IC- F4260 Series (40 Seiten) in der Kategorie Funkkommunikation. Dieser Bedienungsanleitung war fĆ¼r 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/40
INSTRUCTION MANUAL
This device complies with Part 15 of the FCC
Rules. Operation is subject to the condition that
this device does not cause harmful interference.
The photo shows the
UHF transceiver.
iF4260
UHF TRANSCEIVERS
Series
iF3260
VHF TRANSCEIVERS
Series
i
IMPORTANT
READ ALL INSTRUCTIONS carefully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL ā This
instruction manual contains important oper ating instructions
for the IC-F3261DT/DS, IC-F3263DT/DS VHF TRANSCEIV-
ERS and IC-F4261DT/DS, IC-F4263DT/DS UHF TRANS-
CEIVERS.
This instruction manual includes some functions which are
usable only when they are preset by your dealer. Ask your
dealer for details.
See the operating guide for details of IDASā¢ NXDNā¢,
BIIS, MDC and LTRĀ® system operations. Ask your dealer
for details.
WORD DEFINITION
RDANGER! Personal death, serious injury or an explo-
sion may occur.
RWARNING! Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, ļ¬re or electric shock.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
IDAS is trademark of Icom Incorporated (Japan).
NXDN is a trademark of Icom Incorporated and JVC KENWOOD Corporation.
LTR is a registered trademark of the E.F.Johnson Technologies, INC. in the
United States.
All other products or brands are registered trademarks or trademarks of their
respective holders.
VOICE CODING TECHNOLOGY
EXPLICIT DEFINITIONS
The AMBE+2ā¢ voice coding Technology embodied in this
product is protected by intellectual property rights including
patent rights, copyrights and trade secrets of Digital Voice
Systems, Inc. This voice coding Technology is licensed solely
for use within this Communications Equipment. The user of
this Technology is explicitly prohibited from attempting to ex-
tract, remove, decompile, reverse engineer, or disassemble
the Object Code, or in any other way convert the Object Code
into a human-readable form. U.S. Patent Nos.
#5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365,
#5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772,
#5,247,579, #5,226,084 and #5,195,166.
ii
R DANGER! NEVER short the terminals of the battery
pack.
R DANGER! Use and charge only speciļ¬ed Icom battery
packs with Icom radios or Icom chargers. Only Icom battery
packs are tested and approved for use with Icom radios or
charged with Icom chargers. Using third-party or counterfeit
battery packs or chargers may cause smoke, ļ¬re, or cause
the battery to burst.
R WARNING! NEVER hold the transceiver so that
the antenna is very close to, or touching exposed parts of
the body, especially the face or eyes, while transmitting. The
transceiver will perform best if the microphone is 5 to 10 cm
(2 to 4 inches) away from the lips and the transceiver is verti-
cal.
R WARNING! NEVER operate the transceiver with
a headset or other audio accessories at high volume levels.
Hearing experts advise against continuous high volume op-
eration. If you experience a ringing in your ears, reduce the
volume level or discontinue use.
R WARNING! NEVER operate the transceiver while
driving a vehicle. Safe driving requires your full attentionā
anything less may result in an accident.
CAUTION: MAKE SURE the ļ¬exible antenna, bat-
tery pack and jack cover are securely attached to the trans-
ceiver, and that the antenna and battery pack are dry before
attachment. Exposing the inside of the transceiver to dust or
water will result in serious damage to the transceiver.
DO NOT operate the transceiver near unshielded electri-
cal blast ing caps or in an explosive atmosphere.
DO NOT push [PTT] when not actually intending to transmit.
DO NOT use or place the transceiver in direct sunlight or
in areas with temperatures below ā30Ā°C (ā22Ā°F) or above
+60Ā°C (+140Ā°F).
The basic operations, transmission and reception of the trans-
ceiver are guaranteed within the speciļ¬ed operating tempera-
ture range. However, the LCD display may not be operate
correctly, or show an indication in the case of long hours of
operation, or after being placed in extremely cold areas.
DO NOT modify the transceiver. The transceiver warranty does
not cover any problems caused by unauthorized modiļ¬cation.
DO NOT use harsh solvents such as benzine or alcohol
when cleaning, as they will damage the transceiver surfaces.
BE CAREFUL! The transceiver will become hot when
operating it continuously for long periods of time.
PRECAUTIONS
Produktspezifikationen
| Marke: | Icom |
| Kategorie: | Funkkommunikation |
| Modell: | IC- F4260 Series |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Icom IC- F4260 Series benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Funkkommunikation Icom
25 August 2024
25 August 2024
Bedienungsanleitung Funkkommunikation
- Funkkommunikation Kenwood
- Funkkommunikation Motorola
- Funkkommunikation Furuno
- Funkkommunikation Simrad
- Funkkommunikation President
- Funkkommunikation Team
- Funkkommunikation Albrecht
- Funkkommunikation Stabo
- Funkkommunikation GTV
- Funkkommunikation Intek
- Funkkommunikation Multi Care Systems
- Funkkommunikation Rexon
- Funkkommunikation Spektrum
- Funkkommunikation Swissphone
- Funkkommunikation Vertex Standard
- Funkkommunikation Wintec
- Funkkommunikation Wouxun
- Funkkommunikation Baofeng
Neueste Bedienungsanleitung fĆ¼r -Kategorien-
21 September 2024
17 September 2024
26 August 2024
26 August 2024
26 August 2024
25 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024