Speco Technologies HTINT40T1 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Speco Technologies HTINT40T1 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
200 New Highway, Amityville, NY 11701
800 645- -5516 / www.specotech.com
DIMENSIONS
FEATURES
Unit : inch
HD-TVI 2MP Intensifier® T Indoor
Indoor
Indoor
Indoor Indoor Mini-Board Camera
Mini-Board Camera
Mini-Board Camera
Mini-Board CameraMini-Board Camera
with True WDR, UTC, 2BNC out for TVI & CVBS
HTINT40T1 3.6mm fixed lens, black housing
Accessories
SPECIFICATIONS
Image Sensor.................. 1/3” Progressive Scan CMOS, 2MP
Minimum Illumination....... 0.001 lux (INTENSIFY On’)
Eective Pixels................ 1984 (H) x 1105 (V)
Total Pixels...................... 2000 (H) x 1121 (V)
Scanning System............ Progressive
S/N Ratio......................... More than 50dB
Output Resolution............ 1920x1080 @ 30fps
Video Output.................... 1.0Vp-p / 75 Ohms
Electronic Shutter............ Auto / Manual (1/30 1/30,000 sec.)
Day / Night....................... Auto / Color / BW / External
Test Monitor Output......... CVBS (BNC out in Yellow)
Communication............... UTC (up the coax)
Power............................. 12VDC (power supply not included)
Power Consumption........ 12VDC, 200mA max.
Operating Temperature....14 °F 120°F
Unit Dimensions.............. 1.65” (W) x ” (H) x 2. ” (L) 1.86 2
Unit Weight...................... 7 oz.
Certications.................... FCC, RoHS
Signal Distance............... Up to 1600 feet
(depending on coax quality)*
1 Bracket
2 Screws
(for mounting)
2 Screws
(for bracket)
• PRESET (Indoor/Outdoor/Lowlight/Hallway/Lobby/Elevator)
• Full HD resolution over coax (HD-TVI)
• Supports up to Full HD 1080p @ 30fps
• True WDR operation
• Superior low-light performance
• Amplify existing light with no distance limitation
• 3.6mm fixed lens
• Full OSD operation through onboard control and UTC (TVI)
• Additional 960H analog output (BNC out in Yellow)
• Signal distance up to 1600 feet*
• 12VDC operation
• 5 year warranty
IRIS : Controls various settings related to the lens.
ELC (Electronic Light Control) : Used with manual lens only, stay with this
mode for this item.
EXPOSURE : Adjusts exposure settings.
BRIGHTNESS : Adjusts image brightness. (0 )~ 20
SHUTTER : Auto / Manual Shutter can be selectable
- AUTO : Shutter can be selectable automatically.
- FLICKER(Flicker Less) : Selects this when picture flickering. The picture
flickering can be caused by a clash with the frequency of the
installed lighting.
- Manual : Controls the shutter speed manually from 1/30 ~1/30000
INTENSIFY : Sets the desired multiple of the digital exposure length.
(OFF/x2 ~ x32)
AGC(Auto Gain Control): Adjusts the AGC level. (0~ )10
OSD MENU Details
EXPOSURE
• • B/W EXTERN
• • LOW MIDDLE HIGH
• • SHARPNESS GAMMA MIRROR FLIP
DAY / NIGHT
WHITE BAL.
SPECO DNR
IMAGE
EXIT
BRIGHTNESS SHUTTER
BACKLIGHT
HLC BLC WDR
AUTO
• • AWB COLOR GAIN
• • ACE DEFOG
SYSTEM
• • COM. IMAGE RANGE
COLOR SPACE
FRAME RATE
• • INTENSIFY AGC
COLOR
PRIVACY
LENS
MOTION
OUTPUT
LANGUAGE• • COLOR BAR RESET CAMERA TITLE
FREQ
PRESET MODE
INDOOR OUTDOOR LOW LIGHT LOBBY• • HALLWAY ELEVATOR
MAIN SETUP
OSD MENU TREE
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without
notice and without incurring any obligation. Rev. 220818
200 New Highway, Amityville, NY 11701
800 645- -5516 / www.specotech.com
OSD MENU Details
DAY / NIGHT : Adjust Day / Night options.
COLOR : Always Color mode.
B/W : Always B/W mode.
- ANTI-SAT. : Adjusts the Anti Saturation level (0~ )20
EXT : please do not use this function.
- ANTI-SAT. : Adjusts the Anti Saturation level (0~ )20
- EXTERN S/W : Selected at manufacturer side
- D N LEVEL (0~ ) : Selected at manufacturer side20
- N D LEVEL (0~ ) : Selected at manufacturer side20
- DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)
AUTO : Day / Night is switching automatically by AGC level.
- ANTI-SAT. : Adjusts the Anti Saturation level (0~ )20
- AGC THRES : Adjusts AGC THRES (0~ )20
- AGC MARGIN : Adjusts AGC margin (0~ )20
- DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)
COLOR : Adjusts white balancing options.
AWB : it goes to optimized color level automatically.
COLOR GAIN : Sets the desired Color Gain value (0~ )20
MAIN OUTPUT : ANALOG OUT (stay as it is)
ANALOG OUT : TVI (stay as it is)
SPECO DNR : Uses to reduce the background noise in a low luminance
environment with 2D + 3D filtering system.
- Adjusts the DNR level (LOW/MIDDLE/HIGH)
BACKLIGHT : Adjusts backlight options.
WDR : WDR illuminates darker areas of an image while retaining the
same light level for brighter areas to even out the overall brightness
of images with high contrast between bright and dark area
- Adjusts the WDR Weight (LOW/MIDDLE/HIGH)
* CVBS out cannot adjust this function.
BLC : Produces a clearer image of an object darkened by strong backlighting.
- H-POS : Adjusts the horizontal position(0~20)
- V-POS : Adjusts the Vertical position(0~20)
- H-SIZE : Adjusts the horizontal block size (0~20)
- V-SIZE : Adjusts the vertical block size (0~20)
HLC : Uses to contain extremely bright areas such as from car headlight,
the light can be masked out much of the on-screen details.
IMAGE : Adjusts various image options.
SHARPNESS: Adjusts sharpness level. Increasing this value, the picture
outline becomes stronger and clear. (0~10)
GAMMA : Sets the desired Gamma value. (0.45 ~ 0.75)
MIRROR : Change the video direction horizontally.
FLIP: Change the video direction perpendicularly.
ACE (D-WDR) : Uses a digital wide dynamic range to balance dark and over
saturated areas within the image.
DEFOG : Activated this mode when the video or the weather is foggy.
PRIVACY : Used to hide regions of the image.
- ZONE NUM : Selects the zone number up 15.
- ZONE DISP : Selects desired zone with ON or OFF
- H-POS : Adjusts the horizontal position(0~60)
- V-POS : Adjusts the vertical position(0~40)
- H-SIZE : Adjusts the horizontal size(0~40)
- V-SIZE : Adjusts the vertical size(0~40)
- Y-LEVEL : Adjusts the yellow color level (0~20)
- CR LEVEL : Adjusts the red color level (0~20)
- CB LEVEL : Adjusts the blue color level (0~20)
MOTION : Adjust motion detection settings.
- SENSITIVITY : Sets the desired of “Motion” (0~20)
- WINDOW TONE : Adjusts the window tone value (0~60)
- WINDOW USE : Adjusts the window setting size (0~3)
- WINDOW ZONE : activate or deactivate motion window
- DET H-POS :Adjusts the horizontal position(0~60)
- DET V-POS : Adjusts the vertical position(0~40)
- DET H-SIZE : Adjusts the horizontal size(0~60)
- DET V-SIZE : Adjusts the vertical size(0~40)
- ALARM : Select Alarm between ON of OFF
SYSTEM : Adjusts various camera system options.
OUTPUT
FRAME RATE: Select the frame rate 30fps/60fps according to the video
output mode.
FREQ
COM.
- CAM ID : Sets the camera ID for the RS-485 (0~255)
- BAUD RATE : Sets the baud rate for the RS-485 (2400~115200).
IMAGE RANGE
COLOR SPACE
COLOR BAR : Manufacturer’s option
LANGUAGE : Sets the desired OSD language
CAMERA TITLE
RESET: Press with long to reset all settings to factory defaults.
HD-TVI 2MP Intensifier® T Indoor Mini-
Indoor Mini-
Indoor Mini-
Indoor Mini-Indoor Mini-Board Camera
Board Camera
Board Camera
Board CameraBoard Camera
with True WDR, UTC, 2BNC out for TVI & CVBS
HTINT40T1 3.6mm fixed lens, black housing


Produktspezifikationen

Marke: Speco Technologies
Kategorie: Nicht kategorisiert
Modell: HTINT40T1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Speco Technologies HTINT40T1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Speco Technologies

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-