Special-T Disco DISC-3636 Bedienungsanleitung

Special-T Tafel Disco DISC-3636

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Special-T Disco DISC-3636 (1 Seiten) in der Kategorie Tafel. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Parts Included:
1. Column 3. Hardware:
Bolts (3)
Washers (3)
Screws (8)
2. Floor plate
Disco Table Assembly Instructions(C4-PLP Base)
If you are missing parts or
have any questions, please
call Customer Service at
888-705-0777.
Tolls Needed:
13mm rachet wrench or impact drill
3/8” hex bit
13mm socket
#3 Phillips bit
Safety glasses
Instructions
Base Assembly
1. To assemble the base, set mounting plate on the floor
with the bottom of the column pointing upward. Place
the floor plate over the column aligning holes in the floor
plate in inside the column. Insert (3) hex head bolts with
washers inside them and start them by hand.
2. Use impact drill to tight nut as much as possible.
Table Assembly
1. Lay table top upside down on cardboard or carpeted
surface.
2. Position column on the top and align holes in mounting
plate with pre-drilled holes in the top. Use wood screws
to attach the top. Use every hole in the mounting plate.
3. Holding onto the edges of the top, carefully turn the
table over in the upright position. Enjoy your table!
09.2014
START BOLTS BY HAND TO PREVENT
CROSS THREADING
678-879-0777: phone www.specialT.net 678-456-6046: fax

Produktspezifikationen

Marke: Special-T
Kategorie: Tafel
Modell: Disco DISC-3636

Brauchst du Hilfe?

Wenn Sie Hilfe mit Special-T Disco DISC-3636 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten