Sony VGP-UDRW1 Bedienungsanleitung

Sony Sonstiges Computerzubehör VGP-UDRW1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sony VGP-UDRW1 (99 Seiten) in der Kategorie Sonstiges Computerzubehör. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/99

Printed on 70% or more recycled paper

using VOC (Volatile Organic Compound)-

free vegetable oil based ink.

 2008 Sony Corporation / Printed in Japan

USB DVD±RW Drive

VGP-UDRW1

3-287-428-12 (1)

Operating Instructions/Mode d’emploi/사용설명서

http://www.sony.net/

WARNING

To reduce the risk of fire or

electric shock, do not expose this

apparatus to rain or moisture.

Dangerously high voltages are

present inside the unit. Do not

open the cabinet. Refer servicing

to qualified personnel only.

When connecting to the USB port, please connect

to the USB port with mark.

•

Use this product only with the supplied AC adapter.

• To disconnect this product completely from mains

voltage, unplug the AC adapter.

• The socket outlet shall be installed near the

equipment and shall be easily accessible.

Owner’s Record

The model number and the serial number are located

on the bottom of the drive. Record the serial number

in the space provided below. Refer to this number

whenever you call your Sony dealer regarding this

product.

Model No. VGP-UDRW1

Serial No. ________________________________

For customers in the U.S.A.

FCC Notice

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV

technician for help.

The supplied interface cable must be used with the

equipment in order to comply with the limits for a

digital device pursuant to Subpart B of Part 15 of

FCC Rules.

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE: The manufacturer is not responsible for any

radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications

could void the user’s authority to operate the

equipment.

For questions regarding your product or for the Sony

Customer Information Service Center nearest you,

call 1-888-476-6972 in the United States or 1-800-

961-7669 in Canada.

The number below is for FCC related matters only.

Declaration of Conformity

Trade Name: SONY

Model No.: VGP-UDRW1

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San

Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

For customer in the U.S.A. and

Canada

Caution - The use of optical instruments with this

product will increase eye hazard. As the laser

beam used in this product is harmful to the eyes,

do not attempt to disassemble the cabinet. Refer

servicing to the qualified personnel only.

For this optical equipment: Caution - Class 3B

visible and invisible laser radiation when open.

Avoid exposure to the beam.

For customers in Canada

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

Making copies of and using CD-ROMs,

DVD-ROMs, DVD video discs, or music CDs

may violate copyright laws or the terms of the

End-user Licenses provided with such discs. Be

sure to comply with copyright laws and the

terms of the End User Software License when

making or using original CDs and DVDs.

If you have any questions regarding copyright

laws or the terms of the End-user Software

License, please consult the appropriate legal

experts.

• VAIO is a trademark of Sony Corporation.

• Microsoft, Windows, and Windows Vista are

registered trademarks of Microsoft Corporation

in the United States and/or other countries.

•

Sony personal computers equipped with this

drive incorporate copyright protection

technology that is protected by U.S. patents and

other intellectual property rights. Use of this

authorized by Macrovision and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

• All other names of systems, products, and

services are trademarks of their respective

owners.

• In the manual, the ™ or ® marks are not

specified.

• In this manual, Microsoft® Windows® XP

Home Edition and Microsoft

® Windows® XP

Professional are referred to as Windows XP.

• In this manual, Windows Vista® Home Basic,

Windows Vista® Home Premium, Windows

Vista® Business and Windows Vista® Ultimate

are referred to as Windows Vista.

• IBM and PC/AT are registered trademarks of

International Business Machines Corporation.

For customers in Europe

This product conforms with the following

European Directives:

2006/95/EC (Low Voltage Directives)

2004/108/EC (EMC Directives)

This product complies with European standards

EN55022 Class B and EN55024 for use in the

following areas: residential, commercial and light

industrial.

The optical drive included with this product is

classified as a CLASS 1 LASER PRODUCT and

complies with the Laser Product Safety Standard

EN 60825-1. Class 3B visible and invisible laser

radiation when open; avoid exposure to the laser

beam. Repair and maintenance only by authorized

Sony technicians. Improper repairs and use can

create safety hazards.

This equipment has been tested and found to comply

with the limits set out in the EMC Directive by using

connection cables not longer than 3 meters.

The supplied interface cable must be used with the

equipment in order with the limits for a digital

device pursuant to EN55022.

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-

0075 Japan. The Authorized Representative for

EMC and product safety is Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated as

household waste.

CLASS 1

LASER PRODUCT

TO EN 60825-1

Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent

potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product. The recycling of

materials will help to conserve natural resources.

For more detailed information about recycling of

this product, please contact your local Civic

Office, your household waste disposal service or

the shop where you purchased the product.

Overview

This product is a DVD±RW drive with the USB interface. The drive has the

following features:

• You can write data to a variety of discs such as DVD+R DL (Double

Layer), DVD+R, DVD+RW, DVD-R DL (Dual Layer), DVD-R, DVD-

RW, DVD-RAM, CD-R, and CD-RW. For information on the data

transfer rate during data write, see “Specifications” (page 26).

• Reads DVD+R DL (Double Layer), DVD-R DLDVD+R, DVD+RW,

(Dual Layer), DVD-R, DVD-RW, DVD-RAM, DVD-ROM, CD-R, CD-

RW, and CD-ROM discs. DVD-ROM discs are read at a speed of 8 max.×

(10800 KB/s), and CD-ROM discs at a speed of 24× max. (3600 KB/s).

• You can enjoy playing digital audio CDs and DVD videos on your

personal computer using the drive, if the personal computer supports this

function.

• Can be used to easily reinstall the operating system on the personal

computer using a recovery disc, if the personal computer supports this

function (see page 22).

Note

This drive is region encoded and is only for use in the country or region of purchase.

Compatible personal computers

This drive can be used with the following personal computers. Except for

models with a built-in optical drive (as of December 2007):

• Sony VAIO personal computer preinstalled with Windows XP or

Windows Vista VGN-UX**, VGN-G**, VGN-TZ** (“**” is the model

number.)

• IBM PC/AT compatible personal computers preinstalled with Windows

XP or Windows Vista

See the website referred to in “Getting Help” (page 25) regarding specific

models.

Notes

• This drive does not support Microsoft® Windows® Millennium Edition, Microsoft®

Windows® 2000 Professional, Microsoft® Windows® 98 Second Edition, or earlier

versions of the Windows® operating system.

• This drive can be used for performing a system recovery on a personal computer using

a recovery disc. See “Performing a System Recovery on a Personal Computer” on page

22 for devices with which recovery is possible.

• Use with the above configuration is not necessarily guaranteed.

• Use with a home-built computer, “White box” computer, computer with an upgraded

operating system, or a computer installed with a dual operating system is not

guaranteed.

Supplied Accessories

After unpacking the unit, make sure that the accessories listed below are

present. If anything is missing, contact the Sony dealer where you

purchased this product or a Sony service representative in your area.

• DVD±RW drive (1)

• USB cable (1)

• AC adapter (1)

• AC power cord (1)

• Operating Instructions (this document) (1)

1POWER indicator (see page 12)

2Manual eject hole (see page 18)

3Eject button (see page 15, 17)

4BUSY indicator (see page 14, 15)

Rear

DC 5 .2

V I

5USB connector (see page 12)

6DC IN connector (see page 12)

Locating the Controls and Connectors

Front

Connecting the Drive

You can connect this drive to a personal computer using the supplied USB

cable.

Notes

• Place this drive on a flat surface.

• Do not connect this drive to an external USB hub. (except for the docking station or

port replicator specially designed for your personal computer)

• Disconnect the AC power cord from an AC outlet when not using for a long period of

time.

C 5. 2V IN

DC 5.2V IN

1Turn on the personal computer.

2Connect the AC power cord to the supplied AC adapter, plug

the AC power cord into an AC outlet, and then plug the cable

of the adapter into the DC IN connector on the drive.

The green POWER indicator of the drive lights up.

USB cable

USB

connector

AC adapter AC power cord

To AC outlet

DC IN connector

USB connector

3Connect the supplied USB cable to the USB connector on

the rear of the drive.

DC 5.2V IN

4Connect the other end of the supplied USB cable to the USB

connector on the personal computer.

The drive is detected and identified by the personal computer.

z Hint

When this drive is connected to your personal computer for the first time, it takes a

moment for the personal computer to detect the drive.

5Click “Start”, and then click “My Computer” to verify that

(H: DVD-RW Drive) has been added in the “My Computer”

window*.

* This operation is an example of Windows Vista.

Note

Use only the AC adapter VGP-AC5V1 supplied with

this product. If you use an AC adapter other than the one

specified above, your speaker or computer may be

damaged.

USB connector

USB cable

USB connector

USB cable

Polarity of the plug

Disconnecting the drive from the personal computer

Follow the procedure below to disconnect this drive from your computer.

(The following procedures are for Windows Vista.)

Notes

• Before disconnecting the drive, remove the disc inserted in the drive.

• If the message below appears when you attempt to disconnect the drive, close any

programs or Windows currently in use with the drive, wait for a while and then repeat

the procedure.

“Problem Ejecting USB Mass Storage Device. The device cannot be stopped right now,

as it is in use. Close any programs or Windows currently in use with the device, then try

again”.

The icon appears on the taskbar when the drive is recognized by the

computer. To disconnect the drive from the computer, use the icon.

1Click the icon on the taskbar.

The “Safely remove USB Mass Storage Device” message appears.

2Click “Safely remove USB Mass Storage Device”.

The message “The USB Mass Storage Device device can now be

safely removed from the system” appears.

3Disconnect the USB cable.

Continued on next page

Basic Operation

Power management information

When using the power management features of your personal computer,

observe the following points:

• Ensure that the power-saving modes will not be activated automatically

while the BUSY indicator of the drive is flashing. For details, refer to the

manuals provided with your personal computer.

• Before activating the power-saving modes of the personal computer,

verify that the BUSY indicator of the drive goes off, and close any

programs or Windows currently in use with the drive.

• While the personal computer is in a power-saving mode, do not connect

or disconnect the USB cable, or AC adapter.

Inserting a disc

Turn on the computer, and connect this drive before inserting a disc.

1Press the eject button.

The tray pops out.

Eject button

Continued on next page

Removing a disc

1Verify that the BUSY indicator is not flashing, and press the

eject button.

The tray pops out.

2Pull the tray out fully until it stops. While supporting the tray

with your hand, remove the disc.

To release the disc, push on the hub in the center.

Notes

• Do not touch the lens assembly in the tray or the metal section on the rear.

• While a software is currently in use with the drive, you may not be able to remove

discs simply by pressing the eject button. For details, refer to Help or the manuals

provided with the software.

BUSY indicator

Eject button

Disc

Hub

If the disk does not eject

If you may not be able to remove discs simply by pressing the eject button,

verify the BUSY indicator is not flashing, then insert a pin or thick

paperclip, etc., into the manual eject hole. The tray pops out, allowing you

to remove the disc

Manual eject hole

Precautions When Writing Data

Please observe the following precautions when writing data to discs.

We do not guarantee performance in cases of failure to follow these

precautions.

• Be sure to power the personal computer from its AC adapter. Do not run

the personal computer on battery power. If the personal computer is

the written data may be lost or damaged.

• Avoid straining CPU power or the hard disc capacity of the personal

computer. Before writing data, disable software applications such as

screen savers, etc.

• Avoid using any resident disc management utilities or utilities to speed

up disc access as these can impair operation stability and cause data loss.

• Do not switch users while writing data. This may result in data loss.

• While writing data and while inserting or removing discs, protect the

drive and the personal computer from shocks and vibrations.

• While writing data do not connect or disconnect the USB cable to the

personal computer or other USB device and do not turn on or off this

drive or the USB device.

• While writing data do not access the Internet, other personal computers,

or a network, and do not send or receive E-mail.

• When inserting discs, do not touch the recording surface. Dirt on the

recording surface can impair data writing.

• Make sure that your personal computer’s power management function is

not enabled during data writing. Otherwise, the data may be lost. For

details of your personal computer’s power management settings, refer to

the manuals provided with your personal computer.

• Installing or updating the driver software for the drive while writing data

can result in operating problems.

Notes about DVD Video Discs

Region code of playable DVD videos

Region code indications such as

are labeled on some DVD videos to

indicate which type of drive or player can play the discs. If this regional

code indication contains a number other than the one for your region or

ALL

you cannot play the disc in this drive. If you try to do so, a message appears

indicating that playback is prohibited due to area limitations.

Depending on the DVD video, there may be no region code indication

printed on the label even though playing the DVD video is prohibited due

to the area limits.

Note on playback operations of DVD videos

Some playback operations of DVD videos may be intentionally limited

by software producers. Since this drive plays DVD videos according to

the disc contents provided by the software producers, some playback

features may not be available. Also refer to the instructions supplied

with the DVD videos.

Symbols on DVD video discs

The following symbols are labeled on some DVD video discs or their

packages. Each symbol provides information about the contents or features

recorded on the disc.

Depending on the DVD video, there may be no symbols or indications

printed on the label discribing the disc’s contents or features.

For more information about these marks, see the instructions on the DVD

video discs.

Mark Meaning

The number of audio tracks

The number of subtitle tracks

The number of angles

16:9 LB

The available aspect ratios

1Region code

Performing a System Recovery on a

Personal Computer

With the recovery disc, you can reset your personal computer using the

drive, if the personal computer supports this function.

About personal computers that you can reset to default

Personal computers that can be reset using this drive are Sony personal

computers with the Windows XP or Windows Vista operating system

preinstalled; VGN-UX**, VGN-G**, VGN-TZ** (“**” is the model

number.)

(As of December, 2007)

For more details about resetting your personal computer, refer to the

manuals provided with your personal computer.

Notes

• Power the personal computer from its AC adapter when performing a system recovery.

Do not run the personal computer on battery power.

• Disconnect all other peripherals from the personal computer before performing a

recovery.

Continued on next page

Precautions

Usage and storage

locations

Do not use or store this drive in locations

subject to high humidity, high

temperatures, strong vibrations, or direct

sunlight.

Operation

•

To avoid malfunction, do not move the

drive during operation.

• Operate the drive on a level surface.

• Do not place any objects on top of the

drive.

• Protect the drive from sudden

temperature changes. Do not use the

drive immediately after moving it from

a cold to a warm location or after the

ambient temperature has risen

drastically. Otherwise, condensation

inside the drive can occur. If the

temperature changes drastically during

operation, stop using the drive while

keeping power to the drive turned on,

and let it stand for about an hour. Then

turn the power off.

• Do not connect/disconnect the USB

cable with a wet hand.

• Use the USB cable supplied with this

drive.

Lens

Do not touch the lens in this drive.

Furthermore, to avoid dust sticking to the

lens, do not open the tray other than to

remove or insert a disc.

Notes on discs

Note the following in order to protect data

stored on discs.

• Do not stick any labels on the disc nor

scratch it as you would otherwise

damage the disc.

• When using a disc with improperly

attached label, the label edges may peel

or the label may come off entirely inside

the disc drive, leading to malfunction

and damage of the drive. Before

inserting a disc, make sure that the label

is properly attached. In no event will

Sony Corporation be liable for any

damage or media loss caused by

improper labels. Carefully follow the

instructions of any label printing

software and label products. Use of such

products occurs entirely at the risk of

the user.

• If the edge of the label on the disc is off

the disc surface or the label is not sticky

enough to stay on the disc surface, the

label may stick to the interior of the disc

drive and cause a malfunction of your

drive. Make sure that the label is

properly fixed on the disc surface before

using the disc.

Sony assumes no liability for any

malfunction of your drive or damage to

the media caused by improper labeling.

Please thoroughly read instruction notes

of your label software and label sheets.

• Do not touch the data side of the disc

(opposite the label), and hold the disc as

shown below.

Lens

• Do not store discs in locations subject to

high humidity, high temperatures, direct

sunlight, or high levels of dust.

• Take care not to spill any liquid on your

discs.

• Return discs to their cases when not in

use in order to prevent data damage.

• Use an oil-based felt pen when writing

on a disc.

• Do not use a disc with tape, seals, or

paste on it, as the disc may damage the

drive.

Maintenance

Cleaning the cabinet

Wipe the outside of the drive with a soft,

dry cloth. To remove stubborn stains,

moisten the cloth with a mild, neutral

detergent. Do not use solvents, cleaning

alcohol, benzine, or other substances that

may damage the finish.

Cleaning the lens

If you accidentally touch the lens with

dirty fingers or if dust on the lens prevents

the drive from operating properly, clean

the lens.

Cleaning the disc

• Fingerprints and other contamination on

the disc surface can lead to reading

errors. Always keep the disc clean.

• To clean a disc, lightly wipe it from the

center outwards.

• To remove stubborn stains, lightly

moisten the cloth before wiping the

disc, and use a dry cloth afterwards.

• Do not use benzine, record cleaning

liquid, antistatic fluids, or other

substances that may damage the surface

of the disc.

• Never use cleaners on an unused disc.

Use specific CD cleaners to take off

dust.

• You may not be able to write data to a

disc if there are scratches or dust on the

unrecorded area. Be careful not to

damage the discs.

Getting Help

This section provides information on how

to get help and support from Sony, and on

troubleshooting tips for your DVD±RW

drive.

About Sony’s support

options

Sony provides several support options for

your USB DVD±RW drive. When you

have questions about your USB

DVD±RW drive or the software, refer to

the following:

❑This guide explains how to use your

USB DVD±RW drive.

For customers in the United

States and Canada

❑The Sony Customer Information

Service Center offers information

about your VAIO computer and other

Sony products that work with your

computer. To contact Sony Customer

Information Service Center, call

1-888-4SONYPC (1-888-476-6972).

❑Sony Computing Support provides

instant access to information on

commonly encountered problems. Type

a description of the problem and the

Knowledge Database searches for

corresponding solutions online. You can

visit Sony Online Support at:

http://www.sony.com/pcsupport.

For customers in Europe

❑VAIO-Link. For addresses and phone

numbers, refer to

http://www.vaio-link.com

For customers in other

countries and regions

❑VAIO Website provides Frequently

Asked Questions and solutions.

vaio-online.sony.com/

Specifications

Compatible discs

DVD+R DL (Double Layer)

DVD+R

DVD+RW

DVD-R DL (Dual Layer)

DVD-R

DVD-RW

DVD-ROM

DVD-RAM

DVD-Video

CD-R

CD-RW

CD-ROM

CD-DA (audio CD)

CD Extra (CD+)

CD TEXT

Photo CD

Disc diameter: 12 cm

8 cm (reading only)

Drive performance

Data transfer rate

Data read

DVD+R/DVD+RW/DVD-R/DVD-ROM/

DVD-RW:

max. 8x speed

DVD+R DL (Double Layer)/

DVD-R DL (Dual Layer):

max. 6x speed

DVD-RAM: max. 5x speed

CD-R/CD-RW/CD-ROM: max. 24x speed

Data write

DVD+R/DVD+RW/DVD-R*1: max. 8x speed

DVD-RW*2: max. 6x speed

DVD+R DL (Double Layer)*3,

DVD-R DL (Dual Layer)*4: max. 4x speed

DVD-RAM*5: max. 5x speed

CD-R: max. 24x speed

CD-RW: max. 24x speed

(DVD: 1x speed = 1350 KB/s, CD: 1x speed =

150 KB/s)

Multi-session supported, 12/8 cm tray type

*1 Supports writing data to DVD-R discs

compliant with DVD-R for General

version 2.0/2.1.

*2 Supports writing data to DVD-RW discs

compliant with DVD-RW version 1.1/

1.2.

*3 Writing data to DVD+R DL (Double

Layer) discs is available only on discs

supporting DVD+R DL (Double Layer)

recording.

*4 Writing data to DVD-R DL (Dual Layer)

discs is available only on discs supporting

DVD-R DL (Dual Layer) recording.

*5 Cartridge type DVD-RAM cannot be

used. Use only discs without a cartridge,

or the cartridge removable type discs.

DVD-RAM discs are not compatible for

writing to DVD-RAM Ver. 1.0 (single-

sided, one layer discs with a capacity of

2.6 GB)

Connectors

USB Mini-B (1)

DC IN (1)

Operating environment

Operating temperature

41°F to 95°F (5°C to 35°C)

(temperature gradient less than 18°F (10°C)/hour)

Operating humidity

20% to 80% (no condensation),

provided that humidity is less than 65% at 95°F

(35°C)

(hygrometer reading of less than 84°F (29°C))

Storage temperature

–4°F to 140°F (–20°C to 60°C)

(temperature gradient less than 18°F (10°C)/hour)

Storage humidity

10% to 90% (no condensation),

provided that humidity is less than 20% at 140°F

(60°C)

(hygrometer reading of less than 95°F (35°C))

AC adapter

Input

AC 100-240 V, 50/60 Hz

DC Output

Output PC 5.2 V, 2.9 A

Other specifications

Power consumption

Read/write: approx. 5 W

Dimensions

Approx. 5.4 × 0.8 × 6.1 inches

(Approx. 135.5 155 mm) (w × 19 × × h × d)

Mass

Approx. 15.6 oz. (440 g) (main unit only)

Design and specifications are subject to change

without notice.

Troubleshooting

If a problem occurs during operation of the unit, refer to the information

provided in this section and in your Sony personal computer

documentation. If the problem persists, consult your nearest Sony dealer.

For contact information, see “Getting Help” on page 25. Also refer to the

manuals provided with your personal computer.

Symptom Cause/Remedy

Tray does not open

when the eject button

on the unit is pressed.

Tray does not open

when the eject button

in a software

application is clicked.

Tray is not locked.

Tray locks and then

opens again.

cMake sure that the AC adapter and USB cable are

connected correctly, and that the personal computer is

turned on.

cIn some cases, the tray may not open when the eject button

is pressed. For information on how to remove the disc, see

“Removing a disc” on page 17 or Help of the software

being used with the drive.

cThe software may be inhibiting disc access. For

information on how to remove the disc, see “Removing a

disc” on page 17, or Help of the software being used with

the drive.

cPush tray in fully.

cMake sure that the disc is inserted with the label side

facing up.

cThe disc or lens may be dirty. Clean as described on page

25.

cThe disc may be damaged. To confirm that the drive is not

malfunctioning, insert another disc.

cThere may be condensation in the drive or on the disc.

Remove the disc and allow the unit to stand for

approximately one hour.

Continued on next page

Symptom Cause/Remedy

Drive is not connected

correctly to the

personal computer.

No sound from an

audio CD or DVD, or

low sound level.

Sound skips during

audio CD playback.

cThe drive may not be connected correctly to the personal

computer via USB cable. See “Connecting the Drive” on

page 12.

cTo reset the USB interface, shut down your Windows

operating system, turn the off, disconnectpersonal computer

the power cord, and then reconnect and turn the power back

on.

cDisconnect the USB cable and the AC power adapter, and

then reconnect them. If there is still no communication

with the drive, restart the personal computer.

cDepending on network settings, communication with the

drive may stop after the personal computer returns from

sleep mode. If this happens, configure your personal

computer so that it does not enter into sleep mode. (For

details, refer to the manuals provided with your personal

computer.)

cThe volume control of the personal computer may be set to

“Mute”. (For details, refer to the manuals provided with

your personal computer.)

cThe volume control of the personal computer may be set

too low. (For details, refer to the instructions or electronic

manuals provided with your personal computer.)

cThe disc may be scratched or dirty. Clean the disc or use

another disc (see page 25).

cAnother application may be running. Shut down the other

application.

cThe power management function of the personal computer

may be active. Check the CPU speed setting. (For details,

refer to the manuals provided with your personal

computer.)

Symptom Cause/Remedy

Disc is inserted but

sound skips or data

cannot be read.

Data transfer rate is

low.

Personal computer to

which this drive is

connected does not go

into power saving

mode.

A CD-R or CD-RW

disc created on

another personal

computer cannot be

read.

A music CD created

using CD-RW cannot

be played back on a

CD player.

cMake sure that the disc is inserted with the label side facing

up.

cThe type of disc may not be compatible with this drive.

The disc or lens may be dirty. Clean as described on page 25.

cThe disc may be damaged. To confirm that the drive is not

malfunctioning, insert another disc.

cThe disc tray may be dirty.

cThere may be condensation in the drive or the disc.

Remove the disc and allow the unit to stand for

approximately one hour.

cThe power management function of the personal computer

may be active.

Check the CPU speed setting. (For details, refer to the

manuals provided with your personal computer.)

cWhen the drive is operating, the personal computer may

not go into power saving mode.

To ensure a stable operation of the drive, set up the

personal computer so that power saving modes will not be

enabled. (For details, refer to the manuals provided with

your personal computer.)

cYou may not be able to read a CD-R or CD-RW disc that

has not been created on the drive, or you may need to

further process the disc on the personal computer that

created the disc. For details, refer to the manuals provided

with the device used to write data to the CD-R or CD-RW

disc.

cMusic CDs created using CD-RW can only be played back

on a CD player supporting CD-RW playback.

Symptom Cause/Remedy

Cannot write data. c If this drive has not been recognized correctly by the

personal computer, normal read/write operation is not

possible. See the section “Drive is not connected

correctly to the personal computer” on page 29.

c If the drive was brought from a cold to a warm location,

condensation may have formed inside the drive. Allow

the unit to stand for about an hour.

c The DVD+R DL (Double Layer), DVD+R, DVD+RW,

DVD-R DL (Dual Layer), DVD-R, DVD-RW, DVD-

RAM, CD-R, or CD-RW disc may already be full. If a

disc is full, you cannot add data.

c You cannot write data to DVD+RW, DVD-RW, DVD-

RAM, or CD-R discs for which data writing ended in

failure. Delete the data and then rewrite the disc.

Follow the procedure below to delete data from

DVD+RW, DVD-RW, or CD-RW discs. (Use the

RecordNow! software.)

For details on how to delete data, refer to “Help and

Support” of Windows:

c Once you write data to a DVD+R DL (Double Layer),

DVD+R, DVD-R DL (Dual Layer), DVD-R, or CD-R

disc, you cannot rewrite data on the disc. Also, you

cannot delete data written on the disc.

c Make sure that the disc has been inserted correctly with

the side to be recorded facing down.

Symptom Cause/Remedy

Cannot write data on a

DVD-RAM using

Windows feature.

Cannot play

DVD-ROM or

DVD video.

Cannot perform

personal computer

recovery.

Frames are dropped

during DVD playback.

c Change settings, following the procedure below (for

Windows XP).

1 Click the “start” button, and then click “My Computer”.

2 Right-click the DVD-RAM drive icon, then click

“Properties”.

3 Click the “Recording” tab, then uncheck the “Enable CD

recording on this drive” check box.

4 Click “OK”.

Note

• If the “Enable CD recording on this drive” check box is

unchecked, you cannot write data on a CD-R and CD-RW.

To write data on a CD-R and CD-RW, ensure it is checked.

• You may not be able to add data on a DVD-RAM that has

been written using the software installed on your personal

computer using Windows feature, as the format may be

different.

c The region code of the DVD does not match the region

code of the drive. For details, see “Notes about DVD video

discs” on page 21.

c If the DVD-ROM is dirty, carefully wipe it with a soft

cloth. For information on disc maintenance, see “Cleaning

the disc” on page 25.

c Condensation may be found on this drive or a disc in the

drive. Remove the disc from the drive and leave it for about

one hour.

c Make sure that the inserted disc is the recovery CD that

came with the personal computer.

c The power management function of the personal computer

may be active. Check the CPU speed setting. (For details,

refer to the manuals provided with your personal

computer.)

Suite à la page suivante

Ordinateurs compatibles

Ce lecteur peut être utilisé avec les ordinateurs personnels suivants, à

l’exception des modèles dotés d’un lecteur optique intégré (à compter de

décembre 2007) :

• Ordinateurs Sony VAIO préinstallés avec Windows XP ou Windows

Vista VGN-UX**, VGN-G**, VGN-TZ** (« ** » est le numéro du

modèle.)

• Ordinateurs IBM PC/AT préinstallés avec Windows XP ou Windows

Vista

Visitez le site Web indiqué dans la section « Obtenir de l’aide » (page 25)

concernant les modèles spécifiques.

Remarques

• Ce lecteur ne prend pas en charge Microsoft® Windows® Millennium Edition,

Microsoft® Windows® 2000 Professional, Microsoft® Windows® 98 Second Edition ou

les versions antérieures des systèmes d’exploitation Windows

®.

• Ce lecteur peut être utilisé pour effectuer une restauration système sur un ordinateur

personnel à l’aide d’un disque de restauration. Reportez-vous à la section « Exécution

d’une restauration système sur un ordinateur » à la page 22 pour connaître les appareils

sur lesquels la restauration est possible.

• Le bon fonctionnement avec la configuration ci-dessus n’est pas garanti.

• Le fonctionnement avec des ordinateurs montés par l’utilisateur, des ordinateurs

« Whitebox » et des ordinateurs dont le système d’exploitation a été mis à niveau ou

avec un système d’exploitation à double amorçage n’est pas garanti.

Produktspezifikationen

Marke:	Sony
Kategorie:	Sonstiges Computerzubehör
Modell:	VGP-UDRW1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sony VGP-UDRW1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Sonstiges Computerzubehör Sony

Sony PCGA-CG10 Bedienungsanleitung

8 Oktober 2024

Sony PCGA-PRGR1 Bedienungsanleitung

3 Oktober 2024

Sony PCWA-AR300 Bedienungsanleitung

28 September 2024

Sony PCGA-MM532SD Bedienungsanleitung

21 September 2024

Sony VGP-DDRW4 Bedienungsanleitung

18 September 2024

Sony PCGA-AC5 Bedienungsanleitung

18 September 2024

Sony VGP-PRFE1 Bedienungsanleitung

3 September 2024

Sony VGP-UDRW1 Bedienungsanleitung

16 August 2024

Sony PCWA-A220 Bedienungsanleitung

15 August 2024

Sony GDM-FW9011 Bedienungsanleitung

11 August 2024

Bedienungsanleitung Sonstiges Computerzubehör

Neueste Bedienungsanleitung für -Kategorien-

Dell WD19DC Bedienungsanleitung

14 Oktober 2024

Origin Storage OSDOCK-MMUSBCA Bedienungsanleitung

3 Oktober 2024

Origin Storage OSDOCK-USBC Bedienungsanleitung

3 Oktober 2024

Origin Storage OSDOCK-USB3 Bedienungsanleitung

3 Oktober 2024

Goobay 62106 Bedienungsanleitung

1 Oktober 2024

Goobay 45835 Bedienungsanleitung

1 Oktober 2024

Goobay 66255 Bedienungsanleitung

1 Oktober 2024

Urban Factory TCD01UF Bedienungsanleitung

1 Oktober 2024

Kensington SD1700P Bedienungsanleitung

26 September 2024

Kensington SD5500T Bedienungsanleitung

26 September 2024