Sony PCWA-AR300 Bedienungsanleitung
Sony
Sonstiges Computerzubehör
PCWA-AR300
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sony PCWA-AR300 (2 Seiten) in der Kategorie Sonstiges Computerzubehör. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
PCWA-AR300
Sony Corporation ©2003 Printed in Japan
4-674-609-11(1)
Wireless
Broadband Router
Troubleshooting Guide
This document provides solutions to common problems
encountered with the Broadband Router.Wireless
Please refer to this guide before contacting Sony
Customer Information Services.
The PCWA-AR300 consists of:
• Broadband Router Unit PCWA-R1
• Wireless LAN Access Point PCWA-A320
In this document, we refer to the Broadband Router Unit as the
Router Unit and to the Wireless LAN Access Point as the
Wireless Unit.
Preparations
Case 1 No communication between the computer and
Wireless Broadband Router
1Was your computer properly configured for wireless
communication?
When using the Access Point functions under factory default settings, configure the computer as
follows.
The factory default settings of the Access Point function are:
• Network Name (SSID):
The 6-character identifier printed on the label inside the rear cover of the Wireless Unit
• Encryption (WEP):
Disabled
With the Windows Me and Windows 2000 operating systems, perform setup as described in the
documentation of the Wireless LAN PC Card.
With the Windows XP operating system, proceed as follows.
1
Click “Start”, and then click “Control Panel”.
2
In “Control Panel”, double-click “Network Connections”.
Note
If “Network Connections” does not appear, click “Switch to Classic View”.
3
In the “Network Connections” window, right-click the icon of the wireless network to
which you want to connect, and click “View Available Wireless Networks”.
4
In the “Connect to Wireless Network” dialog box, select the Access Point from
“Available Wireless Networks”, and click “Connect”. (When using the Access Point
functions under factory default settings, check the 6-character identifier printed on
the label inside the rear cover of the Wireless Unit.)
2Are the Network Name (SSID) and Data Encryption (WEP)
settings configured correctly?
To connect to the Access Point, the Network Name (SSID) and Data Encryption (WEP) settings
must be the same at the computer and the Access Point.
z Hint
When using the Access Point functions under factory default settings, use the settings listed in above.1
With the Windows Me and Windows 2000 operating systems, verify the Access Point Network
Name (SSID) and Data Encryption (WEP) settings of the Wireless LAN PC Card as described in
its documentation.
With the Windows XP operating system, proceed as follows to verify the settings.
1
Open the “Connect to Wireless Network” dialog box as described in above.1
2
Select the Network Name (SSID) of the Access Point from “Available Wireless
Networks”.
3
If data encryption is enabled for the Access Point, enter the correct Encryption Key
(Network Key) in the “Data Encryption (WEP)” field.
4
Click “Connect”.
If the connection is not established, reset the Access Point functions to the factory default
settings as described in “Miscellaneous”, “Case 1: Forgot settings”, and then set up the
Access Point functions again as described in the separate Quick Start Guide.
Continued on next page
3Can the IP address of the computer be acquired?
With the computer setting “Obtain IP address automatically” enabled, perform the following
steps. For information on how to set the IP address of the computer, see Windows Help.
Windows Me operating system
1
Click “Start”, and click “Run”.
2
In the dialog box used to specify the file name, enter “winipcfg” (exclude the
quotation marks) and click “OK”.
3
From the list in the “IP Setup” dialog box, select the Wireless LAN interface that you
are using (PC card, computer internal wireless LAN, etc.).
4
Make sure that an IP address is shown in the “IP address” field.
5
If the IP address is “0.0.0.0” or an address starting with “169.254.” is displayed, click
“Release”, and then “Renew”.
Note
If an IP address starting with “169.254.” is displayed, a suitable IP address was not obtained with
“Obtain IP address automatically” and your Windows operating system assigned an address to the
Wireless LAN PC Card or Wireless LAN Converter. In this condition, correct network connection is not
possible. Perform the setup again as described in the separate Quick Start Guide.
Windows 2000 and Windows XP operating systems
1
Click “Start”, point to “Programs” (“All Programs” when using the Windows XP
operating system) and then “Accessories”, and click “Command Prompt”.
2
In the command prompt window, enter “ipconfig /all” (exclude the quotation marks)
and press the Enter key.
3
Verify the IP address setting information of the Wireless LAN interface that you are
using (PC card, computer internal wireless LAN, etc.).
z Hint
The “Description” field shows the name of the Wireless LAN interface.
4
If the IP address is “0.0.0.0” or an address starting with “169.254.” is displayed,
enter “ipconfig /renew” (exclude the quotation marks) and press the Enter key.
A new IP address is assigned.
Note
If an IP address starting with “169.254.” is displayed, a suitable IP address was not obtained with
“Obtain IP address automatically” and your Windows operating system assigned an address to the
Wireless LAN PC Card or Wireless LAN Converter. In this condition, correct network connection is not
possible. Perform the setup again as described in the separate Quick Start Guide.
Connections
Case 1 Cannot display the Setup Page (error message
appears)
If entering “http://192.168.11.1” in the address field of the Web browser does not open the Setup Page,
check the following.
1Can the IP address of the computer be acquired?
See “Preparations”, “Case 1: No communication between the computer and Wireless Broadband
Router”, item 3.
2Are the Access Point and Router Unit power connections
correct?
When powered properly, the Status indicator of the Router Unit is lit and the Status indicator of
the Access Point is flashing slowly.
3Is the AC adapter power switch on?
Make sure that the AC adapter is properly connected and verify that the power switch is on.
z Hint
When the AC adapter power switch is on, the LED on the adapter is lit.
4Is the Ethernet cable correctly connected?
Make sure that an end of the Ethernet cable is connected to a LAN connector of the Router Unit.
Connect the other end of the Ethernet cable to your computer.
z Hint
The Ethernet port of your computer is on its back panel.
5Is the Windows XP “Internet Connection Firewall” function
enabled?
If the “Internet Connection Firewall” function is enabled, communication may not be possible.
Follow the procedure below to check or change the settings.
1
Click “Start”, and then click “Control Panel”.
2
In “Control Panel”, double-click “Network Connections”.
Note
If “Network Connections” does not appear, click “Switch to Classic View”.
3
In the “Network Connections” window, right-click the icon of the wireless network
that you want to use, and click “Properties”.
4
Click the “Advanced” tab and (if selected) clear the “Protect my computer and
network by limiting or preventing access to this computer from the Internet” check
box.
5
Click “OK”.
z Hint
Refer to Windows XP Help for details about the “Internet Connection Firewall” function.
Note
Make sure that you take appropriate security measures when the “Internet Connection Firewall” function
is disabled. Except when configuring the Access Point, it is strongly recommended that you enable the
“Internet Connection Firewall” function at all times.
Power switch
a: Off
? : On
Cable modem or DSL modem
LED
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil
based ink.
• Sony, VAIO, , , and the Eco Info logo are trademarks of Sony Corporation.
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other
countries.
• In this manual, Microsoft® Windows® Millennium Edition is referred to as Windows Me, Microsoft® Windows®
2000 Professional is referred to as Windows 2000, Microsoft
® Windows® XP Home Edition and Microsoft®
Windows® XP Professional are referred to as Windows XP.
• Netscape is a registered trademark of Netscape Communications Corporation.
• All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™
or ® marks are not specified.
Contents
Preparations
• No communication between the computer and
Wireless Broadband Router ........................................................................ Case 1
Connections
• Cannot display the Setup Page (error message appears) .......................... Case 1
Router Functions
• The Internet Gateway is shown as a network connection.
What does this mean? ................................................................................ Case 1
• Cannot connect to the Internet .................................................................... Case 2
• I changed the LAN settings of the Router Unit, but I can no longer
connect to the Router Unit or network ........................................................ Case 3
Access Point Functions
• Clicked the “Refresh” button under “Access Point List”, but nothing
appears in the list ........................................................................................ Case 1
• Several Access Points are listed, but I do not know which one to select .... Case 2
• Unable to connect after Access Point functions settings are made ............ Case 3
• If “Easy Setup” is used after “Advanced Setup”,
what about items not included in “Easy Setup”? ......................................... Case 4
Miscellaneous
• Forgot settings ............................................................................................ Case 1
• The power cord is plugged to the AC outlet, but the indicators
do not light .................................................................................................. Case 2
• After pressing the Quick Setup switch, the Status indicator
starts flashing red ........................................................................................ Case 3
6Is the Web browser of the computer used for the Wireless
Broadband Router setup configured to use a proxy server?
Make sure that no proxy setting is enabled for the IP address of the Wireless Broadband Router.
Note
While the proxy server setting is disabled, it may not be possible to display other pages except for the Wireless
Broadband Router Setup Page.
Example 1: Using Microsoft® Internet Explorer
1
On the “Tools” menu, click “Internet Options”.
The “Internet Options” dialog box appears.
2
On the “Connection” tab, click “LAN Settings”.
The “Local Area Network (LAN) Settings” dialog box appears.
z Hint
If there are dial-up profiles in the “Dial-up” box, make sure that you select the “Never dial a connection”
check box.
3
If “Use a proxy server for your LAN (These settings do not apply to dial-up or VPN
connections)” check box is selected, clear the check box and click “OK”.
4
When the Wireless Broadband Router setup is complete, return the proxy setting to
its original condition.
Example 2: Using Netscape
1
Start the Web browser on the computer used for the Wireless Broadband Router
setup.
2
On the “Edit” menu, click “Setup”.
3
In “Category”, click “Advanced” and click the “Proxy” button.
4
Select “Connect directly to the Internet” and click “OK”.
5
When the Wireless Broadband Router setup is complete, return the proxy setting to
its original condition.
Access Point Functions
Case 1 Clicked the “Refresh” button under “Access Point
List”, but nothing appears in the list
1Did you wait long enough?
The scanning process may take some time. After clicking “Refresh”, wait at least 30 seconds
before checking the results.
2Can the IP address of the computer be acquired?
See “Preparations”, “Case 1: No communication between the computer and Wireless Broadband
Router”, item 3.
3Is the Access Point connected correctly to the Router Unit?
Make sure that connections are as shown.
Cable modem or
DSL modem
Case 3 Unable to connect after Access Point functions
settings are made
Did you change the wireless connection settings of the computer
to match the Access Point functions settings?
If the Network Name (SSID) and Data Encryption (WEP) settings of the Access Point are changed, the
wireless connection settings of the computer must be changed accordingly. For information on how to
do this, refer to the documentation of the Wireless LAN PC Card or the Wireless LAN Converter.
Case 4 If “Easy Setup” is used after “Advanced Setup”,
what about items not included in “Easy Setup”?
If you reconfigure the unit with “Easy Setup” after using “Advanced Setup”, the items not included in
“Easy Setup” are set as follows.
Item Setting
Frequency (Channel) Auto Select
Broadcast Network Name (SSID) Yes
IEEE 802.11 Mode 11g, 11b
Access Control Accept all
Connection Method Obtain IP address automatically (DHCP)
DNS Server –
Speed Auto-Detect
Setup Switch Enable
Time Server (NTP Server) –
Note
In the table above, “–” indicate blank settings.
Reset switch
Quick Setup switch
Reset switch
Case 2 Several Access Points are listed, but I do not
know which one to select
The “Access Point List” shows the MAC addresses of all the Access Points found.
Use the MAC address to identify the Access Point.
Check the MAC address of the Access Point to which you want to connect. The MAC address is
located on the label inside the rear cover of the Wireless Unit.
Case 2 The power cord is plugged to the AC outlet, but
the indicators do not light
1Is the AC adapter power switch on?
zHint
When the AC adapter power switch is on, the LED on the adapter is lit.
2Is the “Status Indicator” setting of the Access Point set to
Off?
Open the Setup Page of the Access Point, go to the Access Point “Management” page, and set
“Status Indicator” to On.
1
Click “Status Indicator” and “Change”.
2
Select “On” from the list and click “Execute Setup”.
3
When the completion message appears, click “Close”.
Case 3 After pressing the Quick Setup switch, the Status
indicator starts flashing red
If the Quick Setup switch is held down for more than one second, the Status indicator starts to flash red.
30 seconds later, the Status indicator begins flashing slowly white to indicate normal operaton.
Note
The Quick Setup switch is used in setting the separately available Wireless LAN Converter PCWA-DE30.
For information on how to use the Quick Setup switch, refer to Wireless LAN Converter PCWA-DE30
Quick Start Guide.
Miscellaneous
Case 1 Forgot settings
Reset the Access Point and/or Router Unit, as described below.
To perform a reset, the Wireless Broadband Router must be on. It is possible to reset both units or only
the unit for which you have forgotten the settings. When you forget the Access Point settings, press the
Reset switch on the Wireless Unit. When you forget the Router Unit settings, press the Reset switch on
the Router Unit. Hold the switch for at least a second, and then release it.
The Wireless Broadband Router restarts automatically, and the settings of the unit whose Reset switch
is pressed revert to their factory defaults. Repeat the setup procedure.
Wireless Unit Router Unit
Note
When resetting the Access Point, be careful not to press the Quick Setup switch by mistake.
Router Functions
Case 1 The Internet Gateway is shown as a network
connection. What does this mean?
It means that the Router Unit is recognized as the Internet Gateway. If you disconnect the Router Unit
from the network, the indication disappears.
Case 2 Cannot connect to the Internet
Are the WAN settings correct?
Configure the Router Unit correctly according to the instructions in the Quick Start Guide.
Case 3 I changed the LAN settings of the Router Unit, but
I can no longer connect to the Router Unit or
network
See “Case 1: No communication between the computer and Wireless Broadband Router”, to release3
and renew the IP address of your computer so that it matches the LAN settings of the Router Unit.
Alternately, you can restart the Router Unit, which automatically releases and renews the IP address of
your computer.
Note
In “Case 1: No communication between the computer and Wireless Broadband Router”,
3, we recommend that
you release and renew the IP address only when it is “0.0.0.0” or it starts with “169.254”. In the case above, you
must release and renew the IP address, regardless of the displayed address.
Produktspezifikationen
| Marke: | Sony |
| Kategorie: | Sonstiges Computerzubehör |
| Modell: | PCWA-AR300 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sony PCWA-AR300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sonstiges Computerzubehör Sony
8 Oktober 2024
3 Oktober 2024
28 September 2024
21 September 2024
18 September 2024
18 September 2024
3 September 2024
16 August 2024
15 August 2024
11 August 2024
Bedienungsanleitung Sonstiges Computerzubehör
- Sonstiges Computerzubehör 3M
- Sonstiges Computerzubehör Acer
- Sonstiges Computerzubehör Approx
- Sonstiges Computerzubehör Asus
- Sonstiges Computerzubehör Gembird
- Sonstiges Computerzubehör HP
- Sonstiges Computerzubehör Kensington
- Sonstiges Computerzubehör Manhattan
- Sonstiges Computerzubehör Maxxter
- Sonstiges Computerzubehör Targus
- Sonstiges Computerzubehör Trust
- Sonstiges Computerzubehör Zalman
- Sonstiges Computerzubehör Panasonic
- Sonstiges Computerzubehör Eminent
- Sonstiges Computerzubehör König
- Sonstiges Computerzubehör Pyle
- Sonstiges Computerzubehör Haier
- Sonstiges Computerzubehör Lenco
- Sonstiges Computerzubehör Onkyo
- Sonstiges Computerzubehör Goobay
- Sonstiges Computerzubehör Icy Box
- Sonstiges Computerzubehör Lindy
- Sonstiges Computerzubehör Dell
- Sonstiges Computerzubehör Lenovo
- Sonstiges Computerzubehör Honeywell
- Sonstiges Computerzubehör Techly
- Sonstiges Computerzubehör Kindermann
- Sonstiges Computerzubehör Monoprice
- Sonstiges Computerzubehör InLine
- Sonstiges Computerzubehör D-Link
- Sonstiges Computerzubehör Audiovox
- Sonstiges Computerzubehör Sonoro
- Sonstiges Computerzubehör NewStar
- Sonstiges Computerzubehör I-Tec
- Sonstiges Computerzubehör Digitus
- Sonstiges Computerzubehör Akasa
- Sonstiges Computerzubehör Freecom
- Sonstiges Computerzubehör Kramer
- Sonstiges Computerzubehör Datalogic
- Sonstiges Computerzubehör Speed-Link
- Sonstiges Computerzubehör ProXtend
- Sonstiges Computerzubehör Ibm
- Sonstiges Computerzubehör Iomega
- Sonstiges Computerzubehör LaCie
- Sonstiges Computerzubehör Media-tech
- Sonstiges Computerzubehör AMX
- Sonstiges Computerzubehör Alienware
- Sonstiges Computerzubehör Siig
- Sonstiges Computerzubehör Iogear
- Sonstiges Computerzubehör StarTech.com
- Sonstiges Computerzubehör Avocent
- Sonstiges Computerzubehör Aluratek
- Sonstiges Computerzubehör J5 Create
- Sonstiges Computerzubehör ATen
- Sonstiges Computerzubehör Vantec
- Sonstiges Computerzubehör Havis
- Sonstiges Computerzubehör DreamGEAR
- Sonstiges Computerzubehör Accell
- Sonstiges Computerzubehör V7
- Sonstiges Computerzubehör Rocstor
- Sonstiges Computerzubehör Alogic
- Sonstiges Computerzubehör Apricorn
- Sonstiges Computerzubehör Raidsonic
- Sonstiges Computerzubehör Satechi
- Sonstiges Computerzubehör Xcellon
- Sonstiges Computerzubehör Hamlet
- Sonstiges Computerzubehör Origin Storage
- Sonstiges Computerzubehör Microlab
- Sonstiges Computerzubehör Canyon
- Sonstiges Computerzubehör EXSYS
- Sonstiges Computerzubehör Kingston Technology
- Sonstiges Computerzubehör Gamber-Johnson
- Sonstiges Computerzubehör C2G
- Sonstiges Computerzubehör Enhance
- Sonstiges Computerzubehör Micro Connect
- Sonstiges Computerzubehör IC Intracom
- Sonstiges Computerzubehör Henge Docks
- Sonstiges Computerzubehör Kingwin
- Sonstiges Computerzubehör Urban Factory
- Sonstiges Computerzubehör VisionTek
- Sonstiges Computerzubehör Uncaged Ergonomics
Neueste Bedienungsanleitung fĂĽr -Kategorien-
14 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
26 September 2024
26 September 2024