Sony VGP-PRUX1 Bedienungsanleitung

Sony Sonstiges Computerzubehör VGP-PRUX1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sony VGP-PRUX1 (2 Seiten) in der Kategorie Sonstiges Computerzubehör. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Operating Instructions
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
• Use your product only with the AC adapter supplied with your personal
computer.
• To disconnect it completely from the main voltage, unplug the AC adapter.
• Make sure that the socket outlet is easily accessible.
For customers in the USA
Owner’s Record
The model number and serial number are located on the bottom of your
port replicator. Record the serial number in the space provided here. Refer
to the model and serial number when you call your Sony Service Center.
Model No. VGP-PRUX1
Serial No. ——————————
WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference using one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Only peripherals (computer input/output devices, terminals, printers, etc.)
that comply with FCC Class B limits, may be attached to this computer
product. Operation with non-compliant peripherals is likely to result in
interference to radio and television reception.
All cables used to connect peripherals must be shielded and grounded.
Operation with cables, connected to peripherals, that are not shielded and
grounded, may result in interference to radio and television reception.
If you have any questions about this product, you can reach the Sony
Customer Infomation Service Center at 1-888-476-6972 in the United States
or 1-800-961-7669 in Canada; or write to the Sony Customer Information
Service Center at 12451 Gateway Blvd, Ft. Meyers, FL 33913, or find Sony
Customer Service on the Web at
http://www.sony.com/pcsupport.
Declaration of Conformity
Trade Name: SONY
Model No.: VGP-PRUX1
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
(This phone number is for FCC-related matters only.)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• VAIO and are trademarks of Sony Corporation.
• i.LINK is a designation referring to IEEE 1394-1995 and IEEE 1394a-2000.
i.LINK and the i.LINK logo “ ” are trademarks of Sony Corporation.
Before use
Before using the port replicator, please read this manual thoroughly and
retain it for future reference. See also the manuals provided with your
personal computer for more information about connecting the port
replicator.
The Sony VGP-PRUX1 port replicator is designed for Sony personal
computers. However, it may not be used with some models.
2-694-689- (1)12
Port Replicator
VGP-PRUX1
Printed on 70% or more recycled paper using VOC
(Volatile Organic Compound)-free vegetable oil based ink.
© 2006 Sony Corporation / Printed in Japan
S400
Continue to next page
Specifications
Connectors Port replicator connector: Custom connector (1)
USB: Type-A connector (3)*
i.LINK (IEEE 1394): S400 4-pin (1)
External display output:
MONITOR ( ): Analog RGB, VGA, D-sub 15-pin (1)a
AV OUT (T): compatible with NTSC/PAL,
stereo mini jack (1)
LAN connector: LAN (100BASE-TX/10BASE-T) (1)*
* The specifications are the same as those of the personal
computer you are using. For details, refer to the manuals
provided with your personal computer.
Power requirements
AC adapter**
** Use the unit with an AC adapter (VGP-AC16V7) that is
compatible with your personal computer.
Operating temperature
41°F to 95°F (5°C to 35°C)
(temperature gradient less than 18°F (10°C)/hour)
Operating humidity
20% to 80% (not condensed), provided that humidity is
less than 65% at 95°F (35°C)
(hygrometer reading of less than 84°F (29°C))
Storage temperature
–4°F to 140°F (–20°C to 60°C)
(temperature gradient less than 18°F (10°C)/hour)
Storage humidity
10% to 90% (not condensed), provided that humidity is
less than 20% at 140°F (60°C)
(hygrometer reading of less than 95°F (35°C))
Dimensions Approx. 6.0 (w) 4.6 (d) inchesĂ— 2.9 (h) Ă—
(Approx. 150.2 Ă— 71.9 Ă— 114.7 mm)
Mass Approx. 8.8 oz. (249 g)
Supplied accessories
Operating instructions (1)
Holder (1)***
***When using the unit, attach the holder. For details on how to
attach it, refer to the manuals provided with your personal
computer.
Design and specifications are subject to change without notice.
Notes on use
• Use the unit with an AC adapter that is compatible with your personal
computer. See also the manuals provided with your Sony personal
computer for more information.
• To disconnect the unit completely from the main voltage, unplug the AC
adapter.
• Make sure that the socket outlet is easily accessible.
• Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
– Subject to strong magnetic fields
– Sandy
– Subject to direct sunlight
• Do not apply mechanical shock or drop the unit.
• Make sure that nothing metallic comes into contact with the metal parts
of the unit. If this happens, a short-circuit may occur and the unit may be
damaged.
• Do not operate the unit with a damaged cord.
• Do not operate the unit if the unit itself has been dropped or damaged.
• Always keep the metal contacts clean.
• Do not disassemble or convert the unit.
• While in use, it is normal for the unit to get warm.
• Keep the unit away from TV or AM receivers, because it can disturb TV
or AM reception.
• i.LINK, USB, PC card slot, Printer, DVI-D and MONITOR connectors are
not supplied with Limited Power Sources if those connectors are
provided.
• When connecting or disconnecting the unit, handle it carefully.
• When transporting the unit, prevent foreign objects from causing a
malfunction by using the battery pack, the connector covers and the
supplied slot protectors if there is any.
• When transporting your personal computer, be sure to remove the unit
first. Moving your personal computer with the unit installed could cause
the unit to fall off, resulting in personal injury, or damage to the unit or
your personal computer.
• When transporting the unit, detach the holder.
• If there are any dust or dirt particles on the port replicator connector,
your personal computer may not be able to detect the port replicator
when it is connected (even if the particles are invisible to the eye).
If the connection seems to be poor, remove the AC power adapter and
battery and wipe off the connector and the area around it on both the
personal computer and port replicator. Commercial air dusters are also
effective for blowing away residual dust and dirt.
Be careful not to damage the connectors while cleaning them.
On cleaning
Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a
mild detergent solution. Do not use any type of solvent, such as alcohol or
benzine, which may damage the finish.

Produktspezifikationen

Marke: Sony
Kategorie: Sonstiges Computerzubehör
Modell: VGP-PRUX1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sony VGP-PRUX1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sonstiges Computerzubehör Sony

Sony

Sony PCGA-CG10 Bedienungsanleitung

8 Oktober 2024
Sony

Sony PCGA-PRGR1 Bedienungsanleitung

3 Oktober 2024
Sony

Sony PCWA-AR300 Bedienungsanleitung

28 September 2024
Sony

Sony PCGA-MM532SD Bedienungsanleitung

21 September 2024
Sony

Sony VGP-DDRW4 Bedienungsanleitung

18 September 2024
Sony

Sony PCGA-AC5 Bedienungsanleitung

18 September 2024
Sony

Sony VGP-PRFE1 Bedienungsanleitung

3 September 2024
Sony

Sony VGP-UDRW1 Bedienungsanleitung

16 August 2024
Sony

Sony PCWA-A220 Bedienungsanleitung

15 August 2024
Sony

Sony GDM-FW9011 Bedienungsanleitung

11 August 2024

Bedienungsanleitung Sonstiges Computerzubehör

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Dell

Dell WD19DC Bedienungsanleitung

14 Oktober 2024
Origin Storage

Origin Storage OSDOCK-MMUSBCA Bedienungsanleitung

3 Oktober 2024
Origin Storage

Origin Storage OSDOCK-USBC Bedienungsanleitung

3 Oktober 2024
Origin Storage

Origin Storage OSDOCK-USB3 Bedienungsanleitung

3 Oktober 2024
Goobay

Goobay 62106 Bedienungsanleitung

1 Oktober 2024
Goobay

Goobay 45835 Bedienungsanleitung

1 Oktober 2024
Goobay

Goobay 66255 Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory TCD01UF Bedienungsanleitung

1 Oktober 2024
Kensington

Kensington SD1700P Bedienungsanleitung

26 September 2024
Kensington

Kensington SD5500T Bedienungsanleitung

26 September 2024