Sony cmt spz 90 dab Bedienungsanleitung
Sony
Audiosystem
cmt spz 90 dab
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sony cmt spz 90 dab (3 Seiten) in der Kategorie Audiosystem. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
CMT-SPZ90DB.GB.2-688-578-13(1)
WARNING
To reduce the risk of re or electric shock,
do not expose this apparatus to rain or
moisture.
To reduce the risk of re, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
To reduce the risk of re or electric shock, do not place
objects lled with liquids, such as vases, on the apparatus.
Connect the unit to an easily accessible AC outlet. Should
you notice an abnormality in the unit, disconnect the
main plug from the AC outlet immediately.
Do not install the appliance in a conned space, such as a
bookcase or built-in cabinet.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, re or the
like.
2-688-578-13(1)
Micro HI-FI
Component System
Operating Instructions GB
CMT-SPZ90DB
© 2006 Sony Corporation Printed in China
Hooking up the system securely
Except for customers in the U.S.A.
and Canada
is appliance is classied
as a CLASS 1 LASER
product. is marking
is located on the rear
exterior.
European model only
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Notice for customers: the following
information is only applicable
to equipment sold in countries
applying EU Directives
e manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan.
e Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelnger Strasse
61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
Disposal of Old Electrical & Electronic
Equipment
(Applicable in the European Union and
other European countries with separate
collection systems)
is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Oce, your household waste
disposal service or the shop where you purchased the
product.
Applicable accessories: Remote commander
Note on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Music discs encoded with copyright
protection technologies
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
Antennas
Find a location and an orientation that provide good reception, and then set up
the antenna.
Keep the antenna away from the speaker cords and the power cord to avoid
picking up noise.
Before unplugging the FM/DAB antenna, make sure the system is turned o to
preserve your own FM and DAB settings.
FM/DAB lead antenna
(Extend it horizontally.)
Power
Connect the power cord to a wall socket.
If the plug does not t the wall socket, detach the supplied plug
adaptor (only for models equipped with an adaptor).
Right speaker
Wall socket
Left speaker
Basic Operations
Before using the system
To use the remote
Slide and remove the battery compartment lid , and
insert the two supplied R6 (size AA) batteries, side
rst, matching the polarities shown below.
Notes on using the remote
• With normal use, the batteries should last for about six months.
• Do not mix an old battery with a new one or mix dierent types of
batteries.
• If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To set the clock
1 Turn on the system.
Press (power) .
2 Select the clock set mode.
Press CLOCK/TIMER SET on the remote. If the
current mode appears on the display, press /
on the remote repeatedly to select “CLOCK SET”
and then press ENTER on the remote.
3 Set the time.
Press / on the remote repeatedly to set
the hour, and then press ENTER on the remote.
Use the same procedure to set the minute.
e clock settings are lost when you disconnect the
power cord or if a power failure occurs.
To run the DAB Automatic Scan
When you turn on the system for the rst time aer
you purchase the system, DAB Automatic Scan starts
automatically and creates a list of available services.
If you want to run the DAB Automatic Scan again,
perform the procedure below.
1 Press DAB AUTO SCAN on the unit.
“AUTO SCAN” and “PUSH ENTR” appear.
2 Press PUSH ENTER on the unit (or ENTER on the
remote) .
Scanning begins. e scanning progress is indicated
by advancing asterisks. Depending on the DAB
services available in your area, scanning may take a
few minutes.
When scanning is complete, a list of available services
is created.
Notes
• If your country or region does not support DAB broadcast, “NO
SERV” appears.
• Do not press any button on the unit or the remote during DAB
Automatic Scan. Scanning is interrupted and service list may not be
created properly. In this case, run the DAB Automatic Scan again.
• If you move to another area, repeat this procedure to store the
stations for your new area.
• is procedure clears all previously stored presets.
• Before unplugging the DAB antenna, make sure the system is turned
o to preserve your own DAB settings.
• is tuner does not support data services.
Selecting a music source
Press the following buttons (or press FUNCTION
repeatedly).
To select Press
CD CD on the remote.
Tuner TUNER/BAND .
Tape TAPE on the remote.
Component (connected
using an audio cord)
FUNCTION repeatedly
until “AUDIO IN” appears.
Adjusting the sound
To adjust the volume
Press VOLUME +/– on the remote (or turn the
VOLUME control on the unit) .
To add a sound eect
To Press
Generate a more
dynamic sound
(Dynamic Sound
Generator X-tra)
DSGX on the unit.
Set the sound eect EQ repeatedly to select
“BASS” or “TREBLE,” and
then press +/– on the
remote (or EQ LEVEL +/–
on the unit) repeatedly to
adjust the level.
Playing a CD/MP3 disc
1 Select the CD function.
Press CD on the remote.
2 Place a disc.
Press (CD open/close) on the unit, and place a
disc with the label side up on the disc tray.
To insert additional discs, slide the disc tray with your
nger as shown below.
To close the disc tray, press (CD open/close) on
the unit again.
Do not force the disc tray closed with your nger, as
this may damage the unit.
3 Start playback.
Press (play) on the remote (or CD/ (play/
pause) on the unit).
To Press
Pause playback (pause) on the remote (or
CD/ (play/pause) on the
unit). To resume play, press the
button again.
Stop playback (stop) .
Select a folder on an
MP3 disc
+/– (select folder) . Or
turn the jog dial on the unit
and press PUSH ENTER on
the unit (turn the jog dial on
the unit during playback until
“FOLDER” appears, and then
press PUSH ENTER on the
unit to select the desired folder).
Select a track or le / (go back/go forward)
. Or turn the jog dial on
the unit and press PUSH ENTER
on the unit. To cancel, press
CANCEL on the unit.
Find a point in a
track or le
Hold down / (rewind/
fast forward) during playback,
and release the button at the
desired point.
Select Repeat Play REPEAT on the remote
repeatedly until “REP” or “REP1”
appears.
Select a disc Press DISC SKIP on the
remote (or DISC 1 – 3 or
DISC SKIP (in stop mode) on
the unit).
Switch to CD
function from
another source
Press DISC 1 – 3 on the unit
(Automatic Source Selection).
Exchange other discs
while playing
Press EX-CHANGE on the
unit.
To change the play mode
Press PLAY MODE repeatedly while the player is
stopped. You can select normal play (“ALL DISCS” for
all discs, “1DISC” for a disc, or “ *” for all MP3 les in
the folder on the disc), shue play (“ALL DISCS SHUF,”
“1DISC SHUF,” or “ SHUF*”), or program play
(“PGM”).
* When playing a CD-DA disc, (SHUF) Play performs the same
operation as 1DISC (SHUF) Play.
Note on the jog dial
Only the rst 6 characters are displayed when performing the folder
search, track search, or le search.
Notes on Repeat Play
• All tracks or les on a disc are played repeatedly up to ve times.
• You cannot select “REP” and “ALL DISCS SHUF” at the same time.
• “REP 1” indicates that a single track or le is repeated until you stop
it.
Notes on playing MP3 discs
• Do not save other types of les or unnecessary folders on a disc that
has MP3 les.
• Folders that have no MP3 les are skipped.
• MP3 les are played back in the order that they are recorded onto
the disc.
• e system can only play MP3 les that have a le extension of
“.MP3.”
• If there are les on the disc that have the “.MP3” le extension,
but that are not MP3 les, the unit may produce noise or may
malfunction.
• e maximum number of:
– folders is 255 (including the root folder).
– MP3 les is 511.
–
MP3 les and folders that can be contained on a single disc is 512.
– folder levels (the tree structure of les) is 8.
• Compatibility with all MP3 encoding/writing soware, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Notes on playing multisession discs
• If the disc begins with a CD-DA (or MP3) session, it is recognized as
a CD-DA (or MP3) disc, and other sessions are not played back.
• A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Listening to the radio
Before you can receive DAB, you must complete the
DAB Automatic Scan procedure (see “Before using the
system”).
1 Select “DAB” or “FM.”
Press TUNER/BAND repeatedly.
2 Select the tuning mode.
Press TUNING MODE repeatedly until “AUTO”
appears.
3 Tune in the desired station.
Press +/– on the remote (or TUNING +/– on the
unit) . Scanning stops automatically when a station
is tuned in, and then “TUNED” (DAB only) and
“STEREO” (for stereo programs) appear. When you
tune in a DAB station or an FM station that provides
RDS services, the service name or station name
appears on the display.
To stop automatic scanning (FM band only)
Press (stop) .
To tune in a station with a weak signal (FM
band only)
If the scanning does not stop, press TUNING MODE
repeatedly until “AUTO” and “PRESET” disappear, and
then press +/– on the remote (or TUNING +/– on the
unit) repeatedly to tune in the desired station.
Notes on listening to DAB stations
• When tuning in a DAB station, it may take a few seconds before you
hear any sound.
• Primary service is automatically received when secondary service
ends.
Playing a tape
1 Select the tape function.
Press TAPE on the remote.
2 Insert a tape.
Press PUSH OPEN/CLOSE on the unit, and
insert the TYPE I (normal) tape into the cassette
holder with the side you want to play facing forward.
Make sure there is no slack in the tape to avoid
damaging the tape or the tape deck. Press PUSH
OPEN/CLOSE on the unit again to close the
cassette holder.
3 Start playback.
Press (play) on the remote (or TAPE/
(play/pause) on the unit).
To Press
Pause playback (pause) on the remote (or
TAPE/ (play/pause) on
the unit). To resume play, press the
button again.
Stop playback (stop) .
Rewind or fast
forward
/ (rewind/fast forward) .
Changing the display
To change Press
Information on
the display*
DISPLAY repeatedly when the
system is on.
Display mode
(See below.)
DISPLAY repeatedly when the
system is o.
* For example, you can view:
– CD/MP3 disc information such as the track or le number, folder
name (during normal play), or the total play time (while the player
is stopped)
– DAB station information such as the service name, channel label,
preset number, frequency, DLS (Dynamic Label Segment), or
ensemble label
e system oers the following display modes.
Display mode When the system is o,1)
Clock e clock is displayed.
Power Saving
Mode2)
e display is turned o to conserve
power. e timer and clock continue
to operate.
1) e STANDBY indicator lights up when the system is o.
2) When the system is in Power Saving Mode, the following functions
are unavailable:
– setting the clock.
– changing the CD power manage function.
Notes on the display information
• e following are not displayed;
– total playing time for a CD-DA disc depending on the play mode.
– total playing time for an MP3 disc.
– remaining playing time for an MP3 le.
• e following are not displayed correctly;
– elapsed playing time of an MP3 le encoded using a VBR (variable
bit rate).
– folder and le names that do not follow either the ISO9660 Level
1, Level 2 or Joliet in the expansion format.
• e following are displayed;
– ID3 tag information for MP3 les when ID3 version 1 and version
2 tags are used.
– up to 62 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (" $ % ’ ( ) * + , – . / < = >
@ [ \ ] _ ` { | } ! ? ^).
– up to 8 characters of service name, up to 128 characters of DLS
(Dynamic Label Segment) and up to 16 characters of ensemble
label using uppercase letters (A to Z), numbers (0 to 9), and
symbols (" $ % ’ ( ) * + , – . / < = > @ [ \ ] _ ` { | } ! ? ^).
Using optional audio components
To connect an optional headphones
Connect headphones to the PHONES jack on the
unit.
To connect an optional component
Connect additional audio component to the AUDIO
IN jack on the unit using an audio analog cord (not
supplied). Turn down the volume on the system, and
then press FUNCTION repeatedly to select the
AUDIO IN function.
When carrying this system
1 Remove all discs to protect the CD mechanism.
2 Press CD on the remote to select the CD function.
3 Hold down PLAY MODE/TUNING MODE , and press
DISC 1 until “LOCK” appears.
4 Unplug the power cord.
Speakers
CMT-SPZ90DB.GB.2-688-578-13(1)
Other Operations
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
1 Press CD to select the CD function.
2 Press PLAY MODE repeatedly until “PGM” appears
while the player is stopped.
3 Press DISC SKIP to select a disc.
4 Press / repeatedly until the desired
track number appears.
When programing MP3 les, press +/– (select
folder) repeatedly to select the desired folder, and
then select the desired le.
Current disc
Loaded disc
5 Press ENTER to add the track or le to the
program.
“– –.– –” appears when the total time exceeds 100
minutes for a disc, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 le.
6 Repeat steps 3 through 5 to program additional
tracks or les, up to a total of 25 tracks or les.
7 To play your program of tracks or les, press
(play) .
e program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press (play) .
To cancel Program Play
Press PLAY MODE repeatedly until “PGM”
disappears while the player is stopped.
To delete the last track or le of the program
Press CLEAR while the player is stopped.
To view program information, such as total
track number of the program
Press DISPLAY repeatedly.
Tip
You can also use the jog dial on the unit to select les in step 4.
Turn the jog dial and press PUSH ENTER on the unit to select
the desired folder, and then select the desired le.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1 Tune in the desired station (see “Listening to the
radio”).
2 Press TUNER MEMORY .
Preset number
3 Press +/– repeatedly to select your desired preset
number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4 Press ENTER .
5 Repeat steps 1 through 4 to store other stations.
You can preset up to 20 DAB and 20 FM stations. e
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6 To call up a preset radio station, press TUNING
MODE repeatedly until “PRESET” appears, and
then press +/– repeatedly to select the desired
service name (DAB) or preset number (FM).
Note on presetting DAB stations
You can preset a DAB service only when it can be received.
Recording onto a tape
You can record on a TYPE I (normal) tape in two ways:
CD Synchro Recording:
You can record an entire CD onto a tape.
Manual Recording:
You can record just the portions you like from a sound
source, including connected audio components.
Use buttons on the unit to control tape recording.
1 Load a recordable tape with the side you want to
record facing forward.
2 Prepare the recording source.
For CD Synchro Recording:
Press CD on the remote to select the CD function.
Load the disc you want to record.
Press DISC SKIP to select a disc.
When recording a folder from an MP3 disc, press
PLAY MODE repeatedly to select “ ,” and then
press +/– (select folder) repeatedly to select the
desired folder.
To record only your favorite CD tracks in your desired
order, perform steps 2 through 6 of “Creating your
own CD program.”
For Manual Recording:
Select the desired source to record.
3 Set the tape deck to stand by for recording.
For CD Synchro Recording:
Press CD SYNCHRO .
For Manual Recording:
Press PAUSE/START .
4 Start recording.
While recording, you cannot listen to other sources.
For CD Synchro Recording:
Press PAUSE/START . When the recording
is completed, the CD player and the tape deck stop
automatically. If you are recording onto a tape and
the tape reaches the end of the front side part-way
through a track or le, “TURN TAPE” appears. Turn
the tape over to the reverse side, re-insert it, and
“PUSH REC” appears. And then press PAUSE/
START .
For Manual Recording:
Press PAUSE/START , and then start playing the
desired recording source.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the
noise.
To stop recording
Press (stop) .
To pause recording
Press PAUSE/START .
Notes
• Recording stops if you change to a dierent function.
• You cannot eject the disc during CD synchro Recording.
Using the Timers
e system oers three timer functions. You cannot
activate both the Play Timer and the Rec Timer at the
same time. If you use either with the Sleep Timer, the
Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. is function works even if
the clock is not set.
Press SLEEP on the remote repeatedly. If you select
“AUTO,” the system automatically turns o aer the
current disc or tape stops or in 100 minutes.
Do not select “AUTO” during Synchro Recording of a
tape.
Play Timer:
You can wake up to CD, tape or tuner at a preset time.
Rec Timer:
You can record a preset radio station at a specied time.
Use buttons on the remote to control the Play Timer and
the Rec Timer. Make sure you have set the clock.
1 Prepare the sound source.
For Play Timer:
Prepare the sound source, and then press VOLUME
+/– to adjust the volume.
To start from a specic CD track or MP3 le, create
your own CD program.
For Rec Timer:
Tune in the preset radio station.
2 Press CLOCK/TIMER SET .
3 Press / repeatedly to select “PLAY SET”
or “REC SET” then press ENTER .
“ON” appears, and the hour indication ashes.
4 Set the time to start playing or recording.
Press / repeatedly to set the hour, and
then press ENTER .
e minute indication ashes. Use the procedure
above to set the minute.
5 Use the same procedure as in step 4 to set the time
to stop playing or recording.
6 Select the sound source or prepare the tape.
For Play Timer:
Press / repeatedly until the desired
sound source appears, and then press ENTER . e
display shows the timer settings.
For Rec Timer:
Load a recordable tape. e display shows the timer
settings.
7 Press (power) to turn o the system.
e system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
and the Rec Timer will not play or record.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press /
repeatedly until “PLAY SEL” or “REC SEL” appears, and
then press ENTER .
To cancel the timer
Repeat the same procedure as above until “TIMER OFF”
appears, and then press ENTER .
To change the setting
Start over from step 1.
Tips
• e Play Timer setting remains as long as the setting is not canceled
manually.
• e volume is reduced to minimum during the Rec Timer.
• e Rec Timer is canceled automatically aer the Rec Timer has
been activated.
1 Make sure the power cord and speaker cords are
correctly and rmly connected.
2 Find your problem in the checklist below, and take
the indicated corrective action.
If the issue persists, contact your nearest Sony dealer.
If the STANDBY indicator ashes
Immediately unplug the power cord, and check the
following item.
• If your system has a voltage selector, is the voltage
selector set to the correct voltage?
• Are you using only the supplied speakers?
• Is anything blocking the ventilation holes on the rear
of the system?
Aer the STANDBY indicator stops ashing,
reconnect the power cord, and turn on the system. If
the issue persists, contact your nearest Sony dealer.
General
There is no sound.
• e specied station may have temporarily stopped
broadcast.
Sound comes from one channel, or the left and
right volumes are unbalanced.
• Place the speakers as symmetrically as possible.
• Connect only the supplied speakers.
Severe hum or noise.
• Move the system away from sources of noise.
• Connect the system to a dierent wall socket.
• Install a noise lter (available separately) to the power
cord.
The remote does not function.
• Remove any obstacles between the remote and the
remote sensor on the unit, and position the unit
away from uorescent lights.
• Point the remote at the system’s sensor.
• Move the remote closer to the system.
The STANDBY indicator remains lit after
unplugging the power cord.
• e STANDBY indicator may not turn o
immediately aer unplugging the power cord. is
is not a malfunction. e indicator will turn o aer
about 40 seconds.
CD/MP3 player
The sound skips, or the disc will not play.
• Wipe the disc clean, and replace it.
• Move the system to a location away from vibration (for
example, on top of a stable stand).
• Move the speakers away from the system, or place them
on separate stands. At high volume, speaker vibration
may cause the sound to skip.
Play does not start from the rst track.
• Return to Normal Play by pressing PLAY MODE
repeatedly until both “PGM” and “SHUF” disappear.
Starting playback takes more time than usual.
• e following discs take a longer time to start playback.
– a disc recorded with a complicated tree structure.
– a disc recorded in multisession mode.
– a disc that has not been nalized (a disc to which data
can be added).
– a disc that has many folders.
Tuner
Severe hum or noise, or stations cannot be
received.
• Connect the antenna properly.
• Find a location and an orientation that provide good
reception, and then set up the antenna again.
• Keep the antenna away from the speaker cords and the
power cord to avoid picking up noise.
• Do not place the antenna in front of the system.
• Turn o nearby electrical equipment.
“TUNED” does not appear in the display (DAB
only).
• Check all antenna connections, then perform the DAB
Automatic Scan procedure (see “Before using the
system”).
• e current DAB service may not be available. Press
+/– on the remote (or TUNING +/– on the unit) to
select a dierent service.
• If you have moved to another area, some services/
frequencies may have changed and you may not be able
to tune into your usual broadcast.
Perform the DAB Automatic Scan procedure to
re-register the contents of broadcasts. (Performing this
procedure clears all previously stored presets.)
Tape deck
The sound exhibits excessive wow or utter or
dropout.
•
Clean the capstans and pinch rollers. Also, clean and
demagnetize the tape heads. See “Precautions” for details.
Troubleshooting
T
o improve tuner reception
Turn o CD player power by using the CD power
management function. By default, CD power is turned on.
You cannot change the setting in Power Saving Mode.
Use buttons on the unit to turn o CD player power.
1 Press CD/ (play/pause) to select the CD
function.
2 Press (power) to turn o the system.
3 After “STANDBY” stops ashing, press (power)
while holding (stop) .
“CD POWER” and “OFF” appear. With CD player
power turned o, disc access time is increased. To
turn on CD player power, repeat the procedure until
“CD POWER” and “ON” appear.
To reset the system to factory settings
If the system still does not operate properly, reset the
system to factory settings. You cannot reset the system to
factory settings in Power Saving Mode.
Use buttons on the unit to reset the unit to its factory
default settings.
1 Disconnect and reconnect the power cord, and then
turn on the system.
2 Press PLAY MODE/TUNING MODE , DISPLAY
and (power) at the same time.
All user-congured settings, such as preset radio
stations, timer, and the clock, are deleted.
Messages
CANT LOCK : e system cannot be locked aer you
have done the procedure of “When carrying this
system.” Turn the power o and then on again by
pressing (power) on the unit, then perform the
procedure.
CD OVER : You have reached the end of the disc while
pressing (fast forward) during playback or
pause.
COMPLETE : e preset operation ended normally.
LOCKED : e disc tray does not open. Contact your
nearest Sony dealer.
NO DISC : ere is no disc in the player, or you have
loaded a disc that cannot be played.
NO PRESET (DAB only) : ere is no stored preset
station.
NO SERV (DAB only) : ere is no supported DAB
broadcast in your country or region.
NO TAB : You cannot record because the overwrite
protection tab has been removed from the cassette.
NO TAPE : ere is no tape in the tape deck.
NO TEXT (DAB only) : ere is no text information in
the received service.
NOT IN USE : You pressed an invalid button.
PUSH SELECT : You tried to set the clock or timer during
timer operation.
PUSH STOP : You pressed PLAY MODE during
playback.
SET CLOCK : You tried to select the timer when the clock
is not set.
SET TIMER : You tried to select the timer when the Play
Timer or Rec Timer is not set.
STEP FULL : You tried to program more than 25 tracks
or les (steps).
TIME NG : e Play Timer or Rec Timer start and end
times are set to the same time.
Display examples
Display indicates
2 (two)
5 (ve)
6 (six)
8 (eight)
0 (zero)
A
B
D
G
H
K
M
O
Q
R
S
Z
! or |
”
$
%
,
.
?
@
^
Precautions
Discs that this system CAN play
• Audio CD
• CD-R/CD-RW (audio data/MP3 les)
Discs that this system CANNOT play
• CD-ROM
• CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
• CD-R/CD-RW recorded in multisession that have not
ended by “closing the session”
• CD-R/CD-RW of poor recording quality, CD-R/CD-
RW that have scratches or are dirty, or CD-R/CD-RW
recorded with an incompatible recording device
• CD-R/CD-RW which is nalized incorrectly
• Discs containing les other than MPEG 1 Audio Layer-
3 (MP3) les
• Discs of non-standard shape (for example, heart,
square, star)
• Discs that have adhesive tape, paper, or sticker attached
to them
• Rental or used discs with attached seals where the glue
extends beyond the seal
• Discs that have labels printed using ink that feels tacky
when touched
Notes on discs
• Before playing, wipe the disc with a cleaning cloth from
the center out to the edge.
• Do not clean discs with solvents, such as benzine
thinner, or commercially available cleaners or anti-
static spray intended for vinyl LPs.
• Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight.
On safety
• e unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall socket,
even if the unit itself has been turned o.
• Completely disconnect the power cord (mains lead)
from the wall socket (mains) if it is not going to be used
for an extended period of time. When unplugging the
unit, always grip the plug. Never pull the cord itself.
• Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualied
personnel before operating it again.
• e AC power cord can be changed only by a qualied
service facility.
On placement
• Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
• Be careful when placing the unit or speakers on surfaces
that have been specially treated (for example, with wax,
oil, polish) as staining or discoloration of the surface
may result.
• If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about a few hours until the moisture evaporates.
On heat buildup
• Heat buildup on the unit during operation is normal
and is not cause for alarm.
• Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
• Do not obstruct the ventilation holes.
On the speaker system
is speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn o the TV, wait 15 to 30
minutes, and turn it back on.
If there is no improvement, move the speakers far away
from the TV.
Cleaning the cabinet
Clean this system with a so cloth slightly moistened
with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
To prevent a tape from being accidentally
recorded over
Break o the cassette’s overwrite protection tab from side
A or B as illustrated.
Break o the
cassette tab
To later reuse the tape for recording, cover the broken tab
with adhesive tape.
About a tape longer than 90 minutes
e use of the tape with more than 90 minutes of play
time is not recommended except for long, continuous
recording or playback.
Cleaning the tape heads
Use dry- or wet-type cleaning cassette (available
separately) aer every 10 hours of use, before you start an
important recording, or aer playing an old tape. Failure
to clean the tape heads can cause degraded sound quality
or an inability of the unit to record or play tapes. For
details, refer to the instructions of the cleaning cassette.
Demagnetizing the tape heads
Use a demagnetizing cassette (available separately) aer
every 20 to 30 hours of use. Failure to demagnetize
the tape heads can cause an increase in noise, a loss of
high frequency sound, and an inability to completely
erase tapes. For details, refer to the instructions of the
demagnetizing cassette.
Specications
Main unit
Amplier section
DIN power output (rated): 40 + 40 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 50 + 50 W (6 ohms at 1 kHz, 10%
THD)
Music power output (reference): 50 + 50 W (6 ohms at 1 kHz, 10% THD)
Inputs
AUDIO IN: Sensitivity 250 mV, impedance 47 kilohms
Outputs
PHONES: Accepts headphones with an impedance of 8 ohms or more
SPEAKER: Accepts impedance of 6 ohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
* is output is the value measurement at a distance of 200 mm from the
objective lens surface on the Optical Pick-up Block with 7 mm aperture.
Frequency response: 20 Hz – 20 kHz (±2 dB)
Wavelength: 780 – 790 nm
Tape deck section
Recording system: 4-track 2-channel, stereo
Frequency response: 50 – 13,000 Hz (±3 dB), using Sony TYPE I cassettes
Wow and utter: ±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Tuner section
FM/DAB stereo tuner
Antenna: FM/DAB lead antenna
FM tuner section:
Tuning range: 87.5 – 108.0 MHz
DAB tuner section:
Frequency range
Band-III: 174.928 (5A) – 239.200 (13F) MHz
* For details, see “DAB frequency table” below.
DAB frequency table (Band-III)
Frequency Label Frequency Label
174.928 MHz 5A 209.936 MHz 10A
176.640 MHz 5B 211.648 MHz 10B
178.352 MHz 5C 213.360 MHz 10C
180.064 MHz 5D 215.072 MHz 10D
181.936 MHz 6A 216.928 MHz 11A
183.648 MHz 6B 218.640 MHz 11B
185.360 MHz 6C 220.352 MHz 11C
187.072 MHz 6D 222.064 MHz 11D
188.928 MHz 7A 223.936 MHz 12A
190.640 MHz 7B 225.648 MHz 12B
192.352 MHz 7C 227.360 MHz 12C
194.064 MHz 7D 229.072 MHz 12D
195.936 MHz 8A 230.784 MHz 13A
197.648 MHz 8B 232.496 MHz 13B
199.360 MHz 8C 234.208 MHz 13C
201.072 MHz 8D 235.776 MHz 13D
202.928 MHz 9A 237.488 MHz 13E
204.640 MHz 9B 239.200 MHz 13F
206.352 MHz 9C
208.064 MHz 9D
* Frequencies are displayed to two decimal places on this system.
Speaker
Speaker system: 2-way, bass-reex type
Speaker units
Woofer: 12 cm dia., cone type
Tweeter: 4 cm dia., cone type
Nominal impedance: 6 ohms
Dimensions (w/h/d): Approx. 163 × 280 × 220 mm
Mass: Approx. 2.3 kg net per speaker
General
Power requirements: 220 – 240 V AC, 50/60 Hz
Power consumption: 40 watts
Dimensions (w/h/d) (excl. speakers): Approx. 180 × 280 × 331 mm
Mass (excl. speakers): Approx. 4.3 kg
Supplied accessories: Remote Commander (1)/R6 (size AA) batteries (2)/
FM/DAB lead antenna (1)
Design and specications are subject to change without notice.
• Standby power consumption: 0.5 W
• Halogenated ame retardants are not used in the
certain printed wiring boards.
• Lead-free solder is used for soldering certain parts.
•
Halogenated ame retardants are not used in cabinets.
Selected track
or le number
Total playing time of program
(including selected track or le)
Produktspezifikationen
| Marke: | Sony |
| Kategorie: | Audiosystem |
| Modell: | cmt spz 90 dab |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sony cmt spz 90 dab benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Audiosystem Sony
6 Juli 2024
6 Juli 2024
5 Juli 2024
4 Juli 2024
4 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
3 Juli 2024
Bedienungsanleitung Audiosystem
- Audiosystem Samsung
- Audiosystem Medion
- Audiosystem Nedis
- Audiosystem Philips
- Audiosystem Sweex
- Audiosystem Tevion
- Audiosystem AEG
- Audiosystem TechniSat
- Audiosystem Yamaha
- Audiosystem MarQuant
- Audiosystem Grundig
- Audiosystem Kenwood
- Audiosystem Lynx
- Audiosystem Telestar
- Audiosystem Aiwa
- Audiosystem Auna
- Audiosystem Bose
- Audiosystem Lenco
- Audiosystem ODYS
- Audiosystem Pioneer
- Audiosystem JBL
- Audiosystem JVC
- Audiosystem Muse
- Audiosystem Onkyo
- Audiosystem PEAQ
- Audiosystem Technics
- Audiosystem TERRIS
- Audiosystem Teufel
- Audiosystem Akai
- Audiosystem Axxion
- Audiosystem Dual
- Audiosystem Reflexion
- Audiosystem Toshiba
- Audiosystem Tascam
- Audiosystem Zoom
- Audiosystem Ricatech
- Audiosystem Elta
- Audiosystem Fenton
- Audiosystem OneConcept
- Audiosystem Boston Acoustics
- Audiosystem Harman Kardon
- Audiosystem Naim
- Audiosystem Power Dynamics
- Audiosystem S-Digital
- Audiosystem Samson
- Audiosystem Skytec
- Audiosystem Tangent
- Audiosystem Vonyx
- Audiosystem NAD
- Audiosystem Proline
- Audiosystem Omnitronic
- Audiosystem Arcam
- Audiosystem TEAC
- Audiosystem Pure
- Audiosystem Sangean
- Audiosystem NextBase
- Audiosystem Revox
- Audiosystem GPO
- Audiosystem JGC
- Audiosystem Soundmaster
- Audiosystem Sonoro
- Audiosystem Pinnacle
- Audiosystem Ebench
- Audiosystem ION
- Audiosystem Hiteker
- Audiosystem DNT
- Audiosystem Roadstar
- Audiosystem Tivoli
- Audiosystem Tokaï
- Audiosystem Scansonic
- Audiosystem HQ Power
- Audiosystem Polk
- Audiosystem Bluesound
- Audiosystem Devialet
- Audiosystem Fusion
- Audiosystem Iluv
- Audiosystem Jarre
- Audiosystem Karcher Audio
- Audiosystem KRK Systems
- Audiosystem Meridian
- Audiosystem Moneual
- Audiosystem Monitor
- Audiosystem Numan
- Audiosystem Pure Acoustics
- Audiosystem Quadral
- Audiosystem Quantis
- Audiosystem Revo
- Audiosystem Roku
- Audiosystem Sitecom
- Audiosystem Tamashi
- Audiosystem Visual Land
- Audiosystem Bang Olufsen
- Audiosystem Argon
- Audiosystem AquaSound
- Audiosystem Belson
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
26 September 2024
24 September 2024
Sitecom wl 060 wireless audio transmitter Bedienungsanleitung
23 September 2024
23 September 2024
28 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024