Tascam if-fw dm FIRE WIRE Bedienungsanleitung

Tascam Audiosystem if-fw dm FIRE WIRE

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Tascam if-fw dm FIRE WIRE (12 Seiten) in der Kategorie Audiosystem. Dieser Bedienungsanleitung war fĂĽr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
»D00830000B
OWNER'S MANUAL
IF-FW/DM
FireWire Interface Card
2 TASCAM IF-FW/DM Owner's Manual
SETUP ........................................7
IF-FW/DM Interface Setup ...............7
CUBASE / NUENDO .....................7
SONAR ..........................................7
LOGIC ...........................................7
DIGITAL PERFORMER .................7
SYSTEM CLOCKING ........................8
MASTER CLOCK ..........................8
CLOCK SETTINGS .......................8
96 k & 88.2 k Operation ............8
IF-FW/DM & MIXER ROUTING ........8
MIXER OUTPUTS .........................8
DM-3200 ...................................8
DM-24 .......................................9
MIXER INPUTS .............................9
DM-3200 ...................................9
DM-24 .......................................9
THE IF-FW/DM CONTROL PANEL
(WINDOWS) ................................10
ENABLE WDM ............................11
Table of contents
INTRODUCTION .......................2
FEATURES ........................................3
SYSTEM REQUIREMENTS ..............3
Macintosh .....................................3
Windows .......................................3
DM-3200 Requirements ...............3
DM-24 Requirements ...................3
Trademarks ...................................3
INSTALLATION ..........................4
CONFIGURE FOR YOUR MIXER .....4
INSTALLING THE IF-FW/DM ............4
MAKING CONNECTIONS .................5
CONFIGURING THE COMPUTER ....5
Macintosh .....................................5
Windows .......................................6
Windows 64-Bit ............................6
Thank you for purchasing the TASCAM
IF-FW/DM FireWire audio card for
TASCAM mixers. It is designed to provide
audio and MIDI interfacing between your
TASCAM mixer and your computer based
DAW, essentially turning your TASCAM
mixer into a FireWire audio/MIDI interface.
Please take some time to look through this
Owner’s Manual and familiarize yourself
with the IF-FW/DM’s features, setup and
operation. We suggest you pay particular
attention to the setup notes for your com-
puter platform of choice (Mac or PC). You
may also need to refer to your software’s
documentation for a clear understanding of
how to set up an audio/MIDI interface from
within your software. Your experience with
the IF-FW/DM will be greatly enhanced by a
good working knowledge of your audio soft-
ware.
Be sure to check the TASCAM web site at
www.tascam.com to ensure you have the
latest software updates for your IF-FW/DM.
Introduction
O
TASCAM IF-FW/DM Owner's Manual 3
Introduction
The IF-FW/DM provides the following inter-
facing between your TASCAM mixer and a
host computer via FireWire:
• 24 channels of Input to the mixer from the
computer at 44.1k and 48k sample rates
• 24 channels of Output from the mixer to
the computer at 44.1k and 48k sample
rates
• 1 MIDI port In and Out from the com-
puter
Features
Macintosh
• OS: MacOS X 10.3.5 or higher
• Computer: Apple Macintosh series with
on-board FireWire
• Minimum: G4/800 MHz
• Recommended: Dual G4/1 GHz or higher
• Memory (RAM): 256MB or more
Windows
• OS: Microsoft® Windows® XP Home
Edition or XP Professional with Service
Pack 2
• Computer: Windows® XP Compatible
PC equipped with an IEEE 1394/FireWire
Port
• Minimum: Pentium®, Celeron®, or
Pentium® compatible processor 1.5 GHz
or higher
• Recommended: Pentium® IV/2 GHz or
higher
• Memory (RAM): 256MB or more
DM-3200 Requirements
The DM-3200 must be running software
V1.20 or higher to use the IF-FW/DM.
Please refer to www.tascam.com to obtain
this update. Do not proceed to install the
IF-FW/DM until your DM-3200 is running
V1.20 or higher.
DM-24 Requirements
The DM-24 must be running V3.00 software
to use the IF-FW/DM. Please refer to www.
tascam.com or your local service center to
obtain this update. Do not proceed to install
the IF-FW/DM until your DM-24 is running
V3.00 or higher.
System Requirements
Windows and Windows XP are trademarks
of Microsoft Corporation.
Macintosh, MacOS, MacOS X and FireWire
™ are trademarks of Apple Computer.
All other trademarks are the property of their
respective holders.
Trademarks


Produktspezifikationen

Marke: Tascam
Kategorie: Audiosystem
Modell: if-fw dm FIRE WIRE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tascam if-fw dm FIRE WIRE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Audiosystem Tascam

Bedienungsanleitung Audiosystem

Neueste Bedienungsanleitung fĂĽr -Kategorien-