Skytec PA 200 - 170.122 Bedienungsanleitung

Skytec Audiosystem PA 200 - 170.122

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Skytec PA 200 - 170.122 (12 Seiten) in der Kategorie Audiosystem. Dieser Bedienungsanleitung war fĂĽr 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
1
170.122
PA 200 PORTABLE SOUND SYSTEM FOR USB AND SD
CARD
AND STREAMING AUDIO
USER'S MANUAL
HANDLEIDING
GEBRAUCHSANLEITUNG
2
1 Make sure all items listed on the front of this guide are included in the box.
2 READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3 MAKE MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY
LIFE.
4 Study this setup diagram.
5 Place product in an appropriate position for operation.
6 Make sure all input devices such as microphones, CD players, mp3 players, and
linked amplifiers/PAs are turned off and volume settings are set at “zero”
7 Connect all devices as shown above.
8 Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio
sources.
9. Switch everything on in the following order.
â– audio input sources (i.e. microphones, instruments, CD/MP3 Players)
â– BLOCK ROCKER
â– last, any amplifiers
10. When turning off, always reverse this operation by,
â– turning off amplifiers
â– BLOCK ROCKER
â– last, any input devices
3
DISPLAY PANEL:
DIAGRAM AND PARTS DESCRIPTION
1. CUE: To define and record a return point from which playback it again.
2. PLAY/PAUSE: Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play.
3. REVERSE: Push the reverse button to play your track in reverse, push the reverse button again to cancel this feature.
4. SKIP << BUTTON: You may forward to navigation through one track.
5. IN BUTTON (LOOP SYSTEM): This button sets the beginning point of the loop and light is illuminate.
6. OUT BUTTON (LOOP BUTTON): When you press this button, you set the end point of the seamless loop and you start the loop. To finish the
loop, press again this button.
7. RELOOP BUTTON (LOOP SYSTEM): This button is used to start the last saved loop. To finish the loop, press the reloop button.
8. SKIP >> BUTTON: You may backward to navigation through one track.
9. ID3: When you pressing the ID3 button, Able to show the name of songs on led display.
10. PITCH CONTROL: Use this fader to increase or decrease the speed of the track. Slide up to decrease the pitch and slide down to increase the
pitch.
11. DISPLAY: LCD Display lndicate the Track/Numbers/Time/Remain/Pitch/Continue/Single.
12. USB PORT: Allows the connection of any USB memory stick.
13. SD CARD SLOT: Slot for inserting SD card. The contacts of the card must point downwards. The unit cannot read cards with a capacity of more
than 4GB. The unit is not compatible to SDHC cards and only.
14. TIME BUTTON: Used this knob to choose the time mode, Elapsed time, remaining time or total remaining time.
15. REPEAT BUTTON: Use this button to repeat one track or all the track of the CD.
16. SINGLE: Press these to switch between the SINGLE and CONTINUE play mode. The selected mode is indicated on the LCD. In SINGLE mode,
after each track, the unit stops the reading. In CONTINUOUS mode, the unit read all track and stops.
17. USB/SD: To select audio source between USB storage and SD card.
18. PITCH BEND - BUTTON: The pitch will drop while the - button is pressed and return to the original pitch when it is released.
19. PITCH BEND + BUTTON: The pitch will automatically rise when the + button is pressed and return to the original pitch when it is released.
20. PITCH BUTTON: If you this button, the adjustement of the pitch potentiometer is available.
21. FOLDER/TRACK SEARCH: Allows you to navigate through folders or tracks similarly in either USB or CD mode.
When navigating a standard CD turn the rotary to the right to advance the selection or turn the rotary to the left to decrease the selection.


Produktspezifikationen

Marke: Skytec
Kategorie: Audiosystem
Modell: PA 200 - 170.122

Brauchst du Hilfe?

Wenn Sie Hilfe mit Skytec PA 200 - 170.122 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Audiosystem Skytec

Bedienungsanleitung Audiosystem

Neueste Bedienungsanleitung fĂĽr -Kategorien-