Shure UA860V Bedienungsanleitung

Shure TV-Antenne UA860V

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Shure UA860V (2 Seiten) in der Kategorie TV-Antenne. Dieser Bedienungsanleitung war für 49 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

General Description

The Shure UA860V is a passive, ground-reference omnidirectional VHF an-

tenna for use with VHF wireless systems.

Features

• Greatly improves reception of wireless signal

• Omnidirectional dipole reception pattern

• Integrated microphone stand adapter

• Includes UA8-174-216 antenna, thread adapter, and a 3m (10ft) coaxial

antenna cable

Installation

• Choose a location for installing the antenna that follows the proper

guidelines for cabling and antenna placement.

• Connect the provided UA8 antenna to the top plate of the UA860V.

• Connect the UA860V to the receiver or antenna distribution system.

• Mount the UA860V to a microphone stand. For best performance, keep

the antenna upright and the grounding plate horizontal.

UA860V Installation

Cable Maintenance

To maintain top performance for antenna cables:

• Avoid sharp bends or kinks in the cables.

• Do not deform cables with makeshift clamps, such as bending a nail over

the cable.

• Do not use in permanent outdoor installations.

• Do not expose to extreme moisture.

Selecting Antenna Cables

Use 50 ohm low-loss coaxial cable, such as RG-8U. Shure offers pre-termi-

nated antenna cables ranging from 6 to 100 feet.

Antenna Placement

Use the following guidelines when mounting antennas:

• Receivers, amplifiers, and other accessories must be rated for use within

the same frequency range as the antenna.

• Mount antennas one wavelength (1.75 m) apart.at least

• Keep antennas away from metal objects.

• Position antennas so there is nothing obstructing a line of sight to the

transmitter (including the audience).

• Place antennas as close as possible to transmitter, such as to the side

of the stage (instead of a front of house location).

• For cable runs exceeding 50 feet (15 meters), an in-line amplifier (Shure

UA834) might be necessary to compensate for signal loss.

Important: Always perform a "walk around" test to verify coverage before

using a wireless system during a speech or performance. Experiment with

antenna placement to find the optimum location. If necessary, mark "trouble

spots" and ask presenters or performers to avoid those areas.

Find More Information Online

For more information, visit http://www.shure.com

UA860V

Passive Omnidirectional Antenna

Specifications

RF Frequency Range

174 to 216 MHz

Reception Pattern

Omnidirectional, Dipole

Voltage Standing Wave Ratio (VSWR)

referenced to 50 Ω

<2:1

Connector

Female, BNC

Dimensions

284 mm x 39 mmdia.

Net Weight

without cable

275 g (9.72 oz.)

Accessories

Furnished Accessories

PA72510 ft. BNC-BNC Coaxial Cable

31A18565/8" to 3/8" Thread Adapter

Certifications

This product meets the Essential Requirements of all relevant European di-

rectives and is eligible for CE marking.

The CE Declaration of Conformity can be obtained from:

www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49-7262-92 49 0

Fax: +49-7262-92 49 11 4

Email: info@shure.de

Shure IncorporatedUA860V Passive Omnidirectional Antenna

2/2

Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com

Produktspezifikationen

Marke:	Shure
Kategorie:	TV-Antenne
Modell:	UA860V
Breite:	39 mm
Gewicht:	275 g
Mitgelieferte Kabel:	Koaxial
Höhe:	284 mm
Stecker:	Female, BNC
Unterstützte Bänder:	VHF
Digitales UKW-Radio:	- MHz
Empfangsbereich (VHF):	174 - 216 MHz