Sharp AL-1640 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sharp AL-1640 (60 Seiten) in der Kategorie Kopien. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/60
FOR YOUR PROTECTION...
To aid in reporting this compact copier in case of loss or theft, please record below the
model number and serial number located on the back of the unit. We also suggest you
record all the information listed and retain for future reference.
MODEL NUMBER SERIAL NUMBER
DATE OF PURCHASE
Dealer
Address City
State
Zip Telephone
Service Station
Address City
State Zip
Telephone
For location of the nearest Sharp Authorized Service, or to
obtain product literature, accessories, or supplies,
please call 1 - 800 - BE-SHARP
For customer assistance, please visit http://www.sharp-
usa.com on the World Wide Web or call 1-(630)378-3590.
1
GETTING STARTED STATUS INDICATORSMAKING COPIES GENERAL INFORMATION
CONTENTS Page
GETTING STARTED
● CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
● MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
● PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . 4
– Overall layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
– Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
● COPIER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 8
●CAUTIONS ON HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . 9
●CHECKING PACKED COMPONENTS
AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
●SET-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
● . . . . . . . . . . . . . . . . . . . . . . 13LOADING COPY PAPER
MAKING COPIES
●NORMAL COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
● REDUCTION/ENLARGEMENT/ZOOM . . . . . . . . . . . . . . . 18
● BYPASS FEED (special paper) . . . . . . . . . . . . . . . . . . . . 20
● TWO-SIDED COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
● XY ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
● B/W REVERSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
● DUAL PAGE COPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
● INTERRUPTING A COPY RUN . . . . . . . . . . . . . . . . . . . . . 27
● AUTOMATIC EXPOSURE ADJUSTMENT . . . . . . . . . . . . 28
● TONER SAVE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
STATUS INDICATORS
● TD CARTRIDGE REPLACEMENT . . . . . . . . . . . . . . . 30
● DRUM CARTRIDGE REPLACEMENT . . . . . . . . . . . . 32
● MISFEED REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . 34
GENERAL INFORMATION
● USER PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
● POWER SAVE MODES . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
● USER MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
● COPIER TROUBLE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
● SUPPLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
– Types and sizes of copy paper . . . . . . . . . . . . . . . . . . . . . . . 46
– Supply part numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
– Genuine supplies statement . . . . . . . . . . . . . . . . . . . . . . . . . 47
● MOVING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 48
● SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
●INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
INTRODUCTION
This copier has been designed to provide
convenient copying features in a minimum
amount of office space and with maximum
operational ease. To get full use of all copier
features, be sure to familiarize yourself with this
manual and the copier.
For quick reference during copier use, keep this
manual in a handy location.
This copier can be used as a laser
printer. However, This manual
describes only the copier features.
For description of the printer
features, see the printer manual.
Conventions used in this
ma1nual
In this manual, the following icons are used to
provide the user with information pertinent to the
use of the copier.
Warns the user that injury to the user or
damage to the copier may result if the
contents of the warning are not properly
followed.
Cautions the user that damage to the copier
or one of its components may result if the
contents of the caution are not properly
followed.
Notes provide information relevant to the
copier regarding specifications, functions,
performance, operation and such, that may
be useful to the user.
Indicates a letter displayed in the copy
quantity display.
2
GETTING STARTED Cautions
CAUTIONS
Follow the cautions below when using this copier.
●The fusing area is hot. Exercise care in this area when removing misfed paper.
●Do not look directly at the light source. Doing so may damage your eyes.
●The socket-outlet shall be installed near the equipment and shall be easily accessible.
●Place the copier on a firm, level surface.
●Do not install the copier in a humid or dusty location.
●When the copier is not used for a long time, for example, during prolonged holidays, turn the
power switch off and remove the power cord from the outlet.
●When moving the copier, be sure to turn the power switch off and remove the power cord from the
outlet.
●Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may
prevent heat dissipation, damaging the copier.
SAFETY PRECAUTIONS
This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This
means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below.
●Do not remove the cabinet, operation panel or any other covers.
●The copier’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by
inserting wedges or other items into switch slots.
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous laser radiation exposure.
4
GETTING STARTED
PART NAMES AND FUNCTIONS
Overall layout
Part names and functions
qPlaten cover
Place the original on the original table and close the
platen cover before copying starts.
wOriginal table
Place the document to be copied here.
eHandles
Use to move the copier.
rPower switch
Press to turn copier power on and off.
tOperation panel
All copier controls are located here for easy operation.
yPaper output tray
Finished copies are deposited in the paper output tray.
uFront cover
Open to remove misfeeds and for copier servicing.
iPaper tray
Holds 250 sheets of copy paper.
oSide cover
Open to remove misfeeds and to service the copier.
!0 Side cover handle
Lift and pull to open the side cover.
!1 Bypass tray guides
Adjust to the width of the copy paper.
!2 Bypass tray
Special papers (including transparency film) and copy
paper can be fed from the bypass tray.
!3 Bypass tray extension
Pull out when feeding large paper such as 8-1/2" x 14"
and 11" x 17".
!4 Charger cleaner
Use to clean the transfer charger.
q
w
e
r
t
y
u
i
!0
o
e
!2
!1
!3
!4
GETTING STARTED
5
GETTING STARTED
PART NAMES AND FUNCTIONS
!5 Drum cartridge handle
Hold to pull out the drum cartridge.
!6 Drum cartridge
Copy images are formed on the photoconductive drum.
!7 TD cartridge lock release lever
Use to unlock the TD cartridge.
!8 TD cartridge strap
Lift to remove the TD cartridge.
!9 TD cartridge
Contains toner.
@0 Roller rotating knob
Turn to remove misfed paper.
!5
!6
!7 !8
!9
@0 @1
@2
Part names and functions
GETTING STARTED
@1 Fusing unit release levers
Lower to remove misfed paper.
The fusing unit is hot.
Take care in removing paper.
@2 Paper guide
Open to remove misfed paper.
Accessories
Operation manual. . . . . . . . . . . . . . . . . . . . . . . 1
TD cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Charger cleaner . . . . . . . . . . . . . . . . . . . . . . . . 1
6
GETTING STARTED
Operation
panel
PART NAMES AND FUNCTIONS
Part names and functions
qOperation panel and keys for printer functions
See the printer manual.
wAUTO/MANUAL/PHOTO ( / / ) key
and indicators (p. 15)
Use to sequentially select the exposure modes: AUTO,
MANUAL ( ), or PHOTO ( ).
eORIGINAL SIZE ENTER key and indicators
Use to input the original size.
rPAPER SIZE indicators
Light up to show the selected copy paper size.
tAlarm indicators
: Paper required indicator (p.13)
: Misfeed indicator (p.28)
: TD cartridge replacement required indicator
(p.24)
: Drum replacement required indicator (p.26)
yAUTO PAPER SELECT indicator
If the bypass tray was previously selected, the AUTO
PAPER SELECT function will select the tray for copying
if the original size and copy ratio are matched to the
paper in the cassette.
uPaper feed location/misfeed location indica-
tors (p. 28)
The selected paper feed location is shown by a lit
indicator ( ).
The misfeed location indicator ( ) blinks when a
misfeed has occurred.
iINTERRUPT key and indicator (p. 21)
Interrupts a copy run.
oPAPER SIZE ENTER key (p.12)
Use to set the paper size in a tray.
!0 Copy quantity display
Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items and @2 @4.
!1 CLEAR ALL ( ) key
Clears all selected settings and returns the copier to the
initial settings.
!2 POWER SAVE ( ) indicator (p. 34)
Lights up when the copier is in the preheat mode or in the
auto power shut-off mode.
!3 XY-ZOOM key and indicator (p. 21)
Use to change the horizontal and vertical copy ratios
independently.
!4 B/W REVERSE key and indicator (p. 23)
Press to reverse the black and white areas.
!5 DUAL PAGE COPY key and indicator (p. 24)
Use to make individual copies of two originals placed
side by side on the original table.
!6 Light ( ) and dark ( ) keys and indicators
(p. 15)
Use to adjust the MANUAL ( ) or PHOTO ( )
exposure level.
GETTING STARTED
7
GETTING STARTED
PART NAMES AND FUNCTIONS
!7 AUTO IMAGE key and indicator
Press for automatic copy ratio selection.
!8 TRAY SELECT ( ) key (p. 15)
Use to manually select a paper tray.
!9 PRESET RATIO selector keys and indicators
(p. 17)
Use to sequentially select preset reduction/enlargement
copy ratios: 50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%.
@0 ZOOM indicator (p.17)
Lights up when a zoom ratio is set.
@1 Zoom keys (p. 17)
Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.
@2 Copy ratio display ( ) key (p. 17)
Press and hold down during standby to display the copy
ratio in the copy quantity display.
@3 Copy quantity keys
Use to select the desired copy quantity or to make user
program entries.
@4 CLEAR ( ) key
Clears the copy quantity display or terminates a copy
run.
Press during standby to display the total number of
copies made to date.
Part names and functions
GETTING STARTED
Press and hold down the key.
12,345
sheets output
1st display 2nd display
Note: 11" x 17" size copies are counted as two
copies.
@5 START ( ) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
Initial settings
The copier assumes the initial settings when it is first
turned on, when the CLEAR ALL ( ) key is pressed,
or approximately one minute* after the last copy is made
in any mode.
●Copy ratio: 100%
●Exposure: Automatic
●Copy quantity: 0
●Paper feed station: Previously selected paper tray
* This time (auto clear time) can be changed. See page
32, USER PROGRAMS.
8
GETTING STARTED
4" (10 cm)
Copier installation
COPIER INSTALLATION
Improper installation may damage the copier. Please note the following
during initial installation and whenever the copier is moved.
If the copier is moved from a cool place to a warm place, condensation may form inside the
copier. Operation in this condition will cause poor copy quality and malfunctions. Leave the
copier at room temperature for at least 2 hours before use.
Do not install your copier in areas that are:
●damp, humid, or very dusty
●exposed to direct sunlight
●poorly ventilated
●subject to extreme temperature or humidity changes, e.g., near an
air conditioner or heater.
The copier should be installed near an accessible power outlet
for easy connection.
Be sure to connect the power cord only to a power outlet that
meets the specified voltage and current requirements.
Also make certain the outlet is properly grounded.
Connect the copier to a power outlet which is not used
for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
Be sure to allow the required space around the machine for
servicing and proper ventilation.
A small amount of ozone is produced within the copier during operation. The emission level is insufficient
to cause any health hazard.
NOTE:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m
3) calculated as an
8 hr. time-weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to
place the copier in a ventilated area.
9
GETTING STARTED
CAUTIONS ON HANDLING
Be careful in handling the copier as follows to maintain the performance of
this copier.
Do not drop the copier, subject it to shock or strike it against any
object.
Do not expose the drum cartridge to direct sunlight.
Doing so will damage the surface (green portion) of the drum cartridge,
causing poor copy quality.
Store spare supplies such as drum cartridges and TD cartridges
in a dark place without removing from the package before use.
If they are exposed to direct sunlight, poor copies may result.
Do not touch the surface (green portion) of the drum cartridge.
Doing so will damage the surface of the cartridge, causing smudges
on copies.
Cautions on handling
10
GETTING STARTED
CHECKING PACKED COMPONENTS
AND ACCESSORIES
Open the carton and check to ensure that the following components and
accessories are included.
Copier
TD cartridge
Operation manual
Power cord
Drum cartridge
(installed in copier)
●If anything is not included or is damaged, contact our Technical Assistance Department at 1-
(630)378-3590.
●Save the carton and packing materials. These can be re-used for transporting the machine,
should it be necessary.
Unpacking
Be sure to lift by the handles on both sides of the copier by two persons to
unpack the copier and carry it to the installation location.
Checking packed components and accessories
11
GETTING STARTED
SET-UP
1Remove all pieces of tape, then open the platen
cover and remove the protective material.
2Use a coin (or other suitable object) to remove the
screw.
Store the screw in the paper tray as described in
step 6 because it must be used if the copier has
to be moved. (p. 42)
3Install the TD cartridge.
●For installation of the TD cartridge, see steps 1 and 2 and steps 4
to 7 of TD CARTRIDGE REPLACEMENT on pages 24 and 25.
4Gently lift and pull out the paper tray until it stops.
5Remove the pressure plate lock. Rotate the
pressure plate lock in the direction of the arrow to
remove it while pressing down the pressure plate of
the paper tray.
Set-up
12
GETTING STARTED Set-up
SET-UP
Pressure
plate lock
Screw
6Store the pressure plate lock which has been
removed in step 5 and the screw which has been
removed in step 2 in the front of the paper tray.
●To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
●For the AL-1621, follow steps 4 to 6 for both the upper and
lower trays except for storage of the screw.
7Ensure that the power switch of the copier is in the
OFF position. Plug the power cord into the nearest
outlet.
If you use the copier in a country other than the
country where the copier was purchased, you will
need to make sure that your local power supply
is compatible with your model. If you plug the
copier into an incompatible power supply,
irreparable damage to the copier will result.
Only insert the power cord into a properly
grounded wall socket.
Do not use extension cords or power strips.
Connect the copier to a power outlet which is not
used for other electric appliances. If a lighting
fixture is connected to the same outlet, the light
may flicker.
8Turn the power switch on.
9Load copy paper.
●When loading copy paper for the first time, be sure to turn the
power switch on in advance.
●For loading copy paper, see steps 2 to 4 of LOADING COPY
PAPER on page 13. To change the paper size from the factory
default size, see pages 14 and 15.
Power on
13
GETTING STARTED
1Gently lift and pull out the paper tray until it stops.
2Push the pressure plate down until it locks in place.
3Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.
●If you change to a different size of copy paper, the tray must be
adjusted. See the next page.
●Set the paper along the guides.
●The tray holds up to 250 sheets of 21 lb. bond paper.
Do not load paper above the maximum height line.
4Push the paper tray firmly back into the copier.
Loading copy paper
Maximum height line
LOADING COPY PAPER
To save space, this copier has been designed with an adjustable front-loading
tray, which is easily opened for paper loading. For best results, use only
SHARP recommended paper. (See page 00.)
The paper required ( ) indicator will light up when there is no copy paper
in the selected paper feed station, or when the selected paper tray is not
installed or is improperly installed.
When the paper size is changed in a paper tray, the size of
the paper must be entered by steps 8 through 11 on page
15. If not, the edges of copies may become smudged with
toner. Also, the AUTO PAPER SELECT and the AUTO
IMAGE features will not function properly.
14
GETTING STARTED
Changing the copy paper size in the tray
1Gently lift and pull out the paper tray until it stops.
2Push the pressure plate down until it locks in place.
3Squeeze the lock lever of the front guide and slide the
front guide to match the width of the paper.
4Move the left guide to the appropriate slot as marked
on the tray.
●When using 11" x 17" copy paper, store the left guide in the slot at the
left front of the paper tray.
5Load copy paper into the tray.
6Place the appropriate label to indicate the selected
paper size into the recess on the right front side of the
paper tray.
7Push the paper tray firmly back into the copier.
Loading copy paper
LOADING COPY PAPER
Front guide
Left guide
17
MAKING COPIES
● For photographs, select PHOTO ( ) and then adjust with the light
( ) and dark ( ) keys as desired.
●There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
6Set the number of copies using the two copy quantity
( , ) keys.
●Press the right copy quantity key to set the units digit from 0 to 9. This
key will not change the tens digit.
●Press the left copy quantity key to set the tens digit from 1 to 9.
●A single copy can be made with the initial setting, i.e., when “0” is
displayed.
● Press the CLEAR ( ) key to clear an entry if a mistake is made.
7 Press the START ( ) key.
●The number in the copy quantity display will decrease by 1 each time
a copy is made.
● Press the CLEAR ( ) key to stop copying in the middle of a run.
●To repeat the same copy sequence for a different original, simply
replace the original and press the START ( ) key.
How to remove the platen cover
The platen cover can be removed to allow copying of
bulky objects. To remove it, simply lift the platen cover
straight up.
●To reattach the platen cover, reverse the above procedure.
NORMAL COPYING
Normal copying
Units digit
Tens digit
18
MAKING COPIES
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with the
AUTO IMAGE ( ) key or manually with the PRESET RATIO selector
( , ) keys and/or the zoom ( , ) keys. The zoom function enables
precise copy ratio selection from 50% to 200% in 1% increments.
Reduction/enlargement/zoom
Automatic
1Place the original on the original table and close the
platen cover.
2When using the original table, press the ORIGINAL SIZE
ENTER ( ) key until the indicator for the size of the
original on the original table lights up.
3 Use the TRAY SELECT ( ) key to select the paper tray
with the desired paper size.
●This feature will not work when copy paper of non-standard size is used
or the bypass tray is used.
4 Press the AUTO IMAGE ( ) key.
●The copy ratio will be automatically set.
●If the size and orientation of the original do not correspond to standard
reduction/enlargement ratios for the selected paper tray, then the
ORIGINAL SIZE indicator will blink.
●If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
5Enter the number of copies.
6 Press the START ( ) key.
●To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE ( ) key again.
●When copying from the SPF with this feature, the
automatic reduction/enlargement mode will be
automatically canceled after copying is complete.
19
MAKING COPIES
Manual
1Place the original on the original table and close the
platen cover.
2 Use the PRESET RATIO selector ( , ) keys and the
zoom ( , ) keys to select the desired copy ratio.
●To select a preset reduction or enlargement copy ratio, press the
or key repeatedly until the indicator for the desired copy ratio is
lit.
A. Preset reduction ratios are: 95%, 77%, 64%, and 50% .
B. Preset enlargement ratios are: 121%, 129%, 141%, and 200%.
C. Zoom ratios: Any ratio from 50% to 200% can be set, in 1%
increments. Press the or key to set the approximate
ratio, then press the key to decrease the ratio or the
key to increase the ratio.
● When a zoom ( , ) key is pressed, the ZOOM indicator will
light up and the zoom ratio will be displayed in the copy quantity
display for at least two seconds.
●To verify a zoom setting without changing the zoom ratio, press and
hold down the copy ratio display ( ) key. When the key is released,
the display will return to the copy quantity display.
●To decrease or increase the zoom ratio rapidly, press and hold down the
or key. However the value will stop at the preset reduction
or enlargement ratios. To move beyond these ratios, release the key and
then press and hold it down again.
D. Same-size reset: Press the or key repeatedly until
the copy ratio returns to 100%.
3Ensure that copy paper of the desired size is installed in
the paper tray.
4 Set the number of copies and press the START ( ) key.
REDUCTION/ENLARGEMENT/ZOOM
Reduction/enlargement/zoom
20
MAKING COPIES
1Unfold the bypass tray.
●When feeding 8-1/2" x 14" or 11" x 17" sized paper, extend the bypass
tray.
2Set the paper guides to the copy paper width.
3Insert the copy paper (print face down) all the way into
the bypass tray.
●Up to 100 sheets of standard copy paper measuring from 5-1/2" x
8-1/2" to 11" x 17" can be loaded in the bypass tray.
●Transparency film, labels, and other special purpose papers (except
envelopes) must be fed individually.
Up to 10 envelopes can be set.
●When adding paper, first remove remaining paper, combine it with the
paper to be added and then reload as a single stack.
●When loading envelopes, make sure that they are straight and flat.
Bypass feed (special paper)
BYPASS FEED (special paper)
The bypass tray is used to copy onto transparency film, labels, and other
special purpose papers. Up to 100 sheets of standard copy paper can be set
in the bypass tray.
For special purpose papers, the original image must be
smaller than the paper or media for copying.
If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
Also for standard copy paper, smudges may appear if the
copy paper is not at least as large as the original image.
21
MAKING COPIES
4 Press the TRAY SELECT ( ) key to select the bypass
tray.
5Leave the copy quantity at 0 if using special papers. Set
the number of copies if using standard copy paper or
envelopes.
6 Press the START ( ) key.
BYPASS FEED (special paper)
Bypass feed (special paper)
22
MAKING COPIES
TWO-SIDED COPYING
Two-sided copies can be made on this copier using the bypass tray.
Two-sided copying
1Place the first original on the original table and make a
copy.
●The first copy can be made using any of the paper feed stations.
2Replace the first original with the second original and
close the document feeder cover.
●Make sure that the first and second originals are oriented in the same
way on the original table.
●When the originals are placed horizontally, make sure that the first and
second originals are oriented in the reverse way on the original table.
3Turn the first copy over left to right and place it into the
bypass tray.
●Be sure to feed the copies one sheet at a time.
4 Use the TRAY SELECT ( ) key to select the bypass
tray.
5 Press the START ( ) key.
23
MAKING COPIES
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be
changed independently.
To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature. (Enlargement
cannot be set.)
1Place the original on the original table and close the
platen cover.
2 Press the XY-ZOOM ( ) key.
●The current value for the vertical direction will be displayed in the
copy quantity display.
3 Use the PRESET RATIO selector ( , ) keys and zoom
( , ) keys to change the copy ratio in the vertical
direction.
● Press a PRESET RATIO selector ( or ) key to set an approximate
ratio, then press the key to decrease the ratio or key to increase
the ratio. The copy ratio will be displayed in the copy quantity display.
4 Press the copy ratio display ( ) key.
●The selected ratio for the vertical direction will be entered and the
current value for the horizontal direction will be displayed in the copy
quantity display.
XY zoom
Original Copy
24
MAKING COPIES XY zoom
XY ZOOM
5 Use the PRESET RATIO selector ( , ) keys and
zoom ( , ) keys to change the copy ratio in the
horizontal direction in a similar manner as for the vertical
direction.
6 Press the copy ratio display ( ) key.
●The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
●To verify the copy ratios, press and hold down the copy ratio display
( ) key. The vertical and horizontal ratios will be alternately
displayed.
7Ensure that copy paper of the desired size is installed in
the paper tray.
●If the bypass tray was previously selected, the tray will be automatically
selected if the original size and copy ratio are matched to the paper in
the cassette.
8 Set the number of copies and press the START ( ) key.
●To change the copy ratios again, press a PRESET
RATIO selector ( , ) key or a zoom ( ,
) key. Then, perform step 3 and the succeeding
steps.
● To cancel this function, press the XY-ZOOM ( ) key
again.
25
MAKING COPIES
1Place the original in the document feeder tray or on the
original table.
2 Press the B/W REVERSE ( ) key.
3Check the copy paper size.
●If the bypass tray was previously selected, the tray will be automatically
selected if the original size and copy ratio are matched to the paper in
the cassette.
4Make all other desired copier selections and press the
START ( ) key.
B/W REVERSE
The B/W REVERSE feature is used to reverse black and white areas.
●When the B/W REVERSE feature is selected, the exposure mode will be
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is canceled, the MANUAL mode will not
automatically be canceled.
Original Copy
B/W reverse
26
MAKING COPIES
1Place the originals on the original table with the center of
the two pages aligned with the paper size index ( 81
/ ).2
Close the platen cover.
●Set the page to be copied first to the right of the paper size index mark.
2 Press the DUAL PAGE COPY ( ) key.
●Check to be sure that 8-1/2" x 11" size copy paper is selected.
3 Set the number of copies and press the START ( ) key.
DUAL PAGE COPY
The DUAL PAGE COPY feature produces individual copies of two documents
placed side by side on the original table. It is especially useful when copying
books and other bound documents. If the AUTO IMAGE feature has been
selected, this feature cannot be selected.
To use the DUAL PAGE COPY feature with the XY ZOOM feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature. (Enlargement
cannot be set.)
Original Copy
Dual page copy
27
MAKING COPIES
1 Press the INTERRUPT ( ) key.
●The copier will return to the initial settings.
2When the copier stops, remove the original(s) and set
the original(s) for interrupt copying.
3Select the desired available copier functions.
4Set the number of copies.
5 Press the START ( ) key.
6When all INTERRUPT copies are finished, press the
INTERRUPT ( ) key again to cancel the INTERRUPT
mode, and remove the original used for interrupt copying.
●The previous copy quantity, copy ratio, copy density, and paper size
will be automatically restored.
7Replace the original for the interrupted job and press the
START ( ) key to resume copying.
INTERRUPTING A COPY RUN
INTERRUPT is used to interrupt a long copy run so that another job can be
done.
Interrupting a copy run
28
MAKING COPIES
1 Press the AUTO/MANUAL/PHOTO ( ) key/ /
to select the PHOTO ( ) mode.
2 Press and hold down the AUTO/MANUAL/PHOTO ( /
/ ) key for approximately 5 seconds.
● The PHOTO ( ) indicator will go out and the AUTO indicator will
begin to blink.
●One or two exposure indicators corresponding to the current automatic
exposure level will light up. The factory default setting is level “3”.
3 Press the light ( ) or dark ( ) key to lighten or
darken the automatic exposure level as desired.
4 Press the AUTO/MANUAL/PHOTO ( ) key./ /
●The AUTO indicator will stop blinking and will light up steadily.
●This automatic exposure level will remain in effect until you change
it again by this procedure.
Automatic exposure adjustment
AUTOMATIC EXPOSURE ADJUSTMENT
The automatic exposure level can be adjusted to suit your copying needs.
29
MAKING COPIES Toner save mode
TONER SAVE MODE
This mode reduces toner consumption by approximately 10% in the automatic
and manual exposure modes. Copies will be lighter but still adequate for
general use. Selection of this mode does not affect the PHOTO ( ) mode.
Follow the procedure below for setting the toning level.
1 Press the AUTO/MANUAL/PHOTO ( ) key/ /
to select the MANUAL ( ) mode.
2 Press and hold down the AUTO/MANUAL/PHOTO ( /
/ ) key for approximately 5 seconds.
● The MANUAL ( ) indicator will go out and the PHOTO ( )
indicator will begin to blink.
●The exposure indicator marked “5” will light up, indicating that the
standard toner mode is active.
3 To enter the toner save mode, press the light ( ) key.
●The exposure indicator marked “1” will light up, indicating that the
toner save mode is selected.
4 Press the AUTO/MANUAL/PHOTO ( ) key./ /
● The PHOTO ( ) indicator will stop blinking and will light up
steadily. The toner save mode is now active.
●To return to the standard mode, repeat the procedure but use the dark
( ) key to select exposure level “5” in step 3.
31
STATUS INDICATORS TD cartridge replacement
TD CARTRIDGE REPLACEMENT
5Remove the protective cover from the TD cartridge by
unlatching three cover hooks from the holes on the
cartridge and then pulling the cover in the direction
indicated by the arrow in the illustration.
6Gently insert the TD cartridge along the guides until it
locks in place.
If dirt or dust is adhered to the TD cartridge, remove it
before installing the cartridge.
7Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover. The indicator will go out .
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
32
STATUS INDICATORS
1Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
2Push gently the right side of the front cover to open the
cover.
3Lift the TD cartridge lock release lever and pull the
cartridge out until the green strap handle can be grasped
by the right hand. Lift the cartridge by the handle while
supporting it with the left hand at the green label position
to remove it.
4Grasp the handle of the drum cartridge and gently pull
the cartridge out.
●Dispose of the old drum cartridge in accordance with local regulations.
DRUM CARTRIDGE REPLACEMENT
The useful life of the drum cartridge is approximately 30,000 copies. When
the internal counter reaches approximately 29,000 copies, the drum
replacement required ( ) indicator will light up indicating that replacement
of the drum cartridge will be needed soon. When the indicator begins to blink,
replace the drum cartridge by following the procedure given below.
Do not remove the protective cover on the drum portion
(black paper) of a new drum cartridge before use. The
cover protects the drum against external light.
Drum cartridge replacement
TD cartridge lock
release lever
For best copying results, be sure to use only
SHARP Genuine Supplies which are designed,
engineered and tested to maximize the life and
performance of SHARP copiers. Look for the
Genuine Supplies label on the drum package.
GENUINE SUPPLIES
33
STATUS INDICATORS
DRUM CARTRIDGE REPLACEMENT
Drum cartridge replacement
5Remove the new drum cartridge from the protective bag
and gently insert the lead end of the drum cartridge
along the guides.
Do not touch the surface of the drum (green portion) of
the cartridge. Doing so may cause smudges on the
copies.
6Remove the protective cover from the drum cartridge
and then push the cartridge all the way into the copier.
7Gently install the TD cartridge. To install the TD cartridge,
see page 24, TD CARTRIDGE REPLACEMENT.
8Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover. The drum replacement required
( ) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
34
STATUS INDICATORS
MISFEED REMOVAL
The copier will stop when a misfeed occurs. The misfeed ( ) indicator will
blink.
If paper is accidentally torn during removal, be sure to remove all pieces.
Be careful not to damage the photoconductive drum.
Misfeed removal
Misfeed in the bypass tray
1Gently pull the misfed paper out.
2Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
● The misfeed ( ) indicator will go out.
Misfeed in the copier
1Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
2Check the misfeed location. Remove the misfed paper
following the instructions for each location in the
illustration below.
If the misfed paper is seen from this
side, proceed to “C. Misfeed in the
transport area”.
If paper is misfed here, proceed to
“B. Misfeed in the fusing area”.
If paper is misfed here, proceed to
“A. Misfeed in the paper feed area”.
36
STATUS INDICATORS
MISFEED REMOVAL
Misfeed removal
Roller rotating knob
Fusing unit release lever
2Turn the roller rotating knob in the direction of the
arrow.
3Carefully remove the misfed paper. Lower the fusing
unit release levers to allow easier removal. Return the
release levers to their operating positions.
The fusing unit is hot. Take care in removing paper.
●Do not touch the surface of the drum (green portion)
of the drum cartridge when removing the misfed
paper. Doing so may damage the drum and cause
smudges on copies.
●Be careful about unfixed toner on the misfed paper.
4Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
● The misfeed ( ) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
C. Misfeed in the transport area
1Open the paper guide by pressing down the projection
on either side of the guide and remove the misfed paper.
The fusing unit is hot. Take care in removing paper.
2If the misfed paper cannot be removed by the previous
step but is visible in the paper output area, remove the
paper by pulling it into the paper output area.
37
STATUS INDICATORS
MISFEED REMOVAL
Misfeed removal
3Close the side cover by pressing the handle on the
cover.
● The misfeed ( ) indicator will go out.
Misfeed in the paper tray
Before opening the paper tray, be sure to open the bypass tray, lift slightly on
the side cover and slide the cover out until it stops, and then perform steps 1
to 3 described in the “A. Misfeed in the paper feed area” section.
1Gently lift and pull out the paper tray and remove the
misfed paper.
2Close the paper tray.
3Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
● The misfeed ( ) indicator will go out.
Produktspezifikationen
| Marke: | Sharp |
| Kategorie: | Kopien |
| Modell: | AL-1640 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sharp AL-1640 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kopien Sharp
25 Januar 2024
20 Dezember 2023
5 November 2022
4 November 2022
Bedienungsanleitung Kopien
Neueste Bedienungsanleitung für -Kategorien-
13 Dezember 2023
27 November 2023
15 September 2023
5 September 2023
14 August 2023