Shark S6005UK Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Shark S6005UK (2 Seiten) in der Kategorie Dampfreiniger. Dieser Bedienungsanleitung war für 50 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
1
2
(Click)
Please be sure to read the enclosed Shark® instructions prior to using your unit.
ASSEMBLY
A
Steam Mop Handle
B
Steam Mop Body
C
Removable Handheld
Steamer
D
Intelli-Mop™ Head
E
Dirt Grip™ Pad (x2)
F
Filling Flask
G
Accessory Hose
H
Garment Steamer
(Certain Models Only)
I
Small Above-Floor
Pocket Tool and Pad
(Certain Models Only)
J
Steam Blast Scrubbing
(Certain Models Only)
K Copper Brush
(Certain Models Only)
L
Nylon Brush
(Certain Models Only)
M Carpet Glider
(Certain Models Only)
N Steam Crevice tool
(Certain Models Only)
B
D
C
WHATS INSIDE
FILLING THE WATER TANK
REMOVING THE PAD
F
1 Open the water tank cap.
2 Use the filling flask to pour
water into the tank. Do not
overll. Replace the cap on the
water tank.
S6005UK_QSG _MP_191213_Mv1
1 Screw the mop handle into the Steam Mop body
(screwdriver not included).
2 Slide the Intelli-Mop Head connector into the
Steam Mop body. Push until you hear it click
securely into place.
E
A
KLIK N’ FLIP® MOP HEAD TECHNOLOGY
Lift the mop straight
up by the handle
until the Mop Head
is hanging straight
down. Press the pad
release button, and
both sides of the head
will drop open,
releasing the pad.
CAUTION: It is recommended that you allow the
pads to cool o before removing them from the
moph ead or accessories to avoid possible
scalding injury.
1 Lift the mop straight
up by the handle
until the Mop Head
is hanging straight
down. Center the
Mop Head above the
pad. Press the release
button on the back
of the mop body, and
both sides
of the mop head will
drop open.
2 Slip the mop head’s
4 corner tabs into
the 4 corner
pockets of the
Dirt Grip™ Pad.
3 Gently press the Mop
Head to theoor on
one side of the pad,
and that side will click
into place.
4 Flip the other side
of the head over
onto theoor to
click into place.
QUICK START GUIDE
FLOOR AND HANDHELD STEAM CLEANER
(Flath ead
screwdriver
required -
not included)
When you need an extra burst of steam to clean
tough, dried messes and stuck-on stains, use the
Steam Blaster.
1 Flip the Mop Head over so that it is behind the
mop body.
2 Tilt the mop handle back. This will cause the Steam
Blaster to emit a concentrated blast of steam onto
the floor.
3 To stop the Steam Blaster™ spray, simply tilt the
mop handle forward.
4 Flip the Mop Head back into its original position and
continue cleaning.
2
3
1
4
STEAM BLASTER™ TECHNOLOGY
1 Plug the power cord into
electrical socket. The STEAM
CONTROL button will flash blue.
2 Press the STEAM CONTROL
button to select your steam
setting: once for , twice for LO HI, and three
times to place the unit in STANDBY MODE.
SETTING IDEAL FOR
THESE
SEALED
SURFACES
RECOMMENDED USAGE
La minate
Hardwood
Marble
Light cleaning and dusting
Loosening and lifting light dirt.
Hardwood
Marble
Tile
Stone
Cleaning most sealed surfaces and
large areas. Basic everyday cleaning.
Removing spots and smaller messes.
Cleaning moderate and heavy-
trac areas.
Hardwood
Marble
Tile
Stone
Deep cleaning and cleaning hard-
to-clean surfaces. Tough cleaning
and removing stuck-on messes and
stains. Deep cleaning heavy-trac
areas. Cutting through heavy dirt
and grime .
INTELLIGENT STEAM CONTROL®
CLEANING
ABOVE-FLOOR CLEANING
ABOVE-FLOOR CLEANING ACCESSORIES
Remove the Handheld Steamer by pressing the release
button and removing it from the cradle.
Snap the desired accessory into the main nozzle of
the Handheld Steamer. Squeeze the steam trigger
to activate steam.
(Note: Tools mode is only available when using the
Handheld Steamer. When the Handheld Steamer is
removed from the cradle, it will automatically go
into Tools mode.)
Once finished with handheld steaming, press the
STEAM CONTROL button until the light flashes
blue to put the unit in STANDBY MODE. Leave to
cool down for 2 to 3 minutes before removing mop
head, pads, or handheld accessories and storing.
ACCESSORIES USE HOW TO ATTACH
G ACCESSORY HOSE
For spot cleaning and direct
steaming. Slide Accessory H ose onto the Handheld Steamer.
SMALL ABOVE
FLOOR POCKET
TOOL AND PAD
(CERTAIN MODELS
ONLY)
Ideal for small, uneven surfaces.
The pointed tip is great for edges
and corners.
Slide the pad onto the Small Above-Floor Pocket Tool so it fits
snugly.
Attach the elastic band and slide the locking toggle to tighten.
Connect the tool to the Accessory Hose by pushing firmly until it
clicks
into place, then attach the Accessory Hose onto the Handheld Steamer.
For questions or to register your product, contact us at: 0800 862 0453 or visit us online at sharkclean.eu
@sharkcleaninguk @sharkcleanuk @sharkcleanuk
Tools
LO
HI
I

Produktspezifikationen

Marke: Shark
Kategorie: Dampfreiniger
Modell: S6005UK
Breite: 340 mm
Tiefe: 220 mm
Gewicht: 2800 g
Produktfarbe: Grey, White
Höhe: 1180 mm
Typ: Tragbarer Dampfreiniger
Leistung: 1050 W
Kabellänge: 8 m
Reinigen der Oberflächen: Harter Boden
Fassungsvermögen: 0.5 l
Dampfdruck: - bar
Abnehmbarer tragbarer Dampfreiniger: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Shark S6005UK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Dampfreiniger Shark

Bedienungsanleitung Dampfreiniger

Neueste Bedienungsanleitung für -Kategorien-