SentrySafe KSW0510 Bedienungsanleitung
SentrySafe
Sicher
KSW0510
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für SentrySafe KSW0510 (12 Seiten) in der Kategorie Sicher. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
Model No.
Modèle Nº
Modelo No.
Serial No.
Nº de série
No. de serie
Dial Combination (Not All Models)
Combinaison du cadran
(pas tous les modèles)
Combinación del disco
(No todos los modelos)
Key No. (Not All Models)
Clé Nº (pas tous les modèles)
Llave No. (No todos los modelos)
Factory Code (Not All Models)
Code d’usine (pas tous les modèles)
Código de fábrica
(No todos los modelos)
•••IMPORTANT•••
If you experience
any
problems or challenges
with your safe, please
contact us. Many issues
can be resolved quickly
without
the product
being returned.
•••IMPORTANT•••
Si vous rencontrez
des
problèmes ou des
diffi cultés avec votre
coffre-fort, veuillez nous
contacter. De nombreux
problèmes peuvent être
résolus rapidement
sans
avoir à retourner le
produit.
•••IMPORTANTE•••
Si llega a tener
algún
problema o difi cultad
con su caja fuerte, favor
de contactarnos. Muchos
asuntos se pueden
resolver rápidamente
sin
tener que hacer una
devolución del producto.
OWNERS MANUAL
Fire-Safe
®
Safes
TABLE OF CONTENTS
Combination lock ................................... 1
Basic electronic lock ............................ 1-2
Advanced electronic lock ........................ 2
Floor mount ........................................... 3
First class customer care ......................... 3
Testing ................................................... 4
MANUEL DU
PROPRIÉTAIRE
Coffres-forts Fire-Safe
®
TABLE DES MATIÈRES
Verrou à combinaison ..........................5
Verrou électronique de base. .............. 5-6
Verrou électronique avancé. ............... 6-7
Installation au sol ............................... .7
Service clientèle de première classe ........7
Essais .................................................. 8
MANUAL DEL USUARIO
Cajas fuertes
Fire-Safe
®
ÍNDICE
Cerradura de combinación ...................... 8
Cerradura electrónica básica ................... 9
Cerradura electrónica avanzada ......... 9-10
Montaje en el piso ............................... 10
Servicio a Clientes de Primera Clase ..... 11
Pruebas............................................. 11
513022
www.sentrysafe.com
Customer Service: 1-800-828-1438
Fax: 585-381-2940
900 Linden Avenue
Rochester, New York 14625
14625-2784 USA
El Departmento de Servicio al Cliente:
Debe marcarse un código de acceso antes de marcar el número
800. Es un proceso de 2 pasos.
Paso 1: marque 01 800 112 2020 ó 001 800 658 5454
Paso 2: a la indicación marque 1-800-451-0821
©2008
1-English
Gain entry with the combination lock
Opening your safe for the fi rst time (keep door open during setup):
1
The handle should be all of the way UP, in
the horizontal position before attempting
to dial out safe.
Testing your combination: Your safe’s combina-
tion is printed on the front of this owner’s manual.
You will have a 3-number or 4-number combination
depending upon the model purchased.
3-NUMBER COMBINATION
(Cannot be changed)
1. To unlock and open
Before dialing your combination, simply insert the
key (if equipped) in the lock and turn until the
plunger pops out. Remove key.
NOTE: The safe will lock if key lock cylinder is
pressed in with or without key.
A. Start the dial at zero.
B. Turn the dial to the left. Make sure ZERO
passes the pointer at least THREE times. Then stop
at the first number of your combination.
C. Turn the dial to the right. Stop the
SECOND time you reach the second number of
your combination.
D. Turn the dial to the left. Stop the FIRST
time the pointer reaches the third number of your
combination.
2. To close and lock
You can relock the safe in two ways. With the
door closed, depress the key lock (if equipped)
with your finger, or spin the combination dial one
full turn. For greatest security, do both. (Make
sure the door handle is in the horizontal position.)
4-NUMBER COMBINATION
(Cannot be changed)
1. To unlock and open Before dialing your combination, simply insert the
key (if equipped) in the lock and turn until the
plunger pops out. Remove key.
A. Point the dial to zero.
B. Turn the dial to the left. Make sure ZERO
passes the pointer at least FOUR times. Then stop
at the first number of your combination.
C. Turn the dial to the right. Stop the THIRD
time you reach the second number of your
combination.
D. Turn the dial to the left. Stop the SECOND
time you reach the combination’s third number.
E. Turn the dial to the right. Stop the FIRST
time you reach the last number of your
combination.
2. To close and lock
You can relock the safe in two ways. With the
door closed, depress the key lock (if equipped)
with your finger, or spin the combination dial
one full turn. For greatest security, do both.
(Make sure the door handle is in the horizontal
position.)
Congratulations on your purchase of a Sentry®Safe product. SentrySafe is the world’s leader in
fi re/water-resistant and security storage. This guide describes how to easily set up your safe.
2Gain entry with the basic electronic lock
The handle should be all of the way UP, in
the horizontal position before attempting
to open safe.
Opening your safe for the fi rst time (keep
door open during setup):
1. Remove and discard the screw (if
equipped) at the base of the lock case.
2. Turn the electronic lock case to the
right (clockwise), from 12 o’clock to
2 o’clock, and remove.
• Insert 4 new AA batteries (not included) to power
this lock.
• Replace the electronic lock case and turn to the
left (to 12 o’clock) to reassemble.
NOTE: The yellow LED will light when the batteries
need to be replaced.
3. Turn the key (if your safe is equipped with a key
lock) to the right so the lock cylinder pops out.
4. Enter the factory code (printed on the fi rst page
of this guide). When the green light appears, you
have four seconds to turn the handle down to
open. Try this several times before proceeding to
the next step.
To unlock safe:
Enter the 5-digit factory code, a pre-programmed
user code, or a pre-programmed user pin
(programming instructions to follow). When the
green LED lights you have 4 seconds to turn the
handle and open the safe.
To lock safe:
Close the door and return the handle to the
horizontal position. For greatest security, depress
the key lock (if equipped) with your fi nger.
NOTE: If your unit is equipped with a water-
resistant gasket additional pressure to the left
corner of the door may be required before the
handle can be returned to the horizontal position.
Access codes
There are 3 possible ways to unlock and access
the safe:
1. Factory code
(Found on the fi rst page of this guide) You can
always open the safe by entering the pre-set 5-digit
factory code. This code cannot be deleted.
2. User code
If you prefer to employ your own code, you can
program the safe to open using a 5-digit user code
of your choice.
3. User pin
If you wish to give someone else temporary access
to the safe, you can program a 5-digit user pin that
can later be erased.
Programming the user code
NOTE: One (1) user code is allowed.
To add:
1. Press the Prog key , then enter the 5-digit
factory code.
2. Enter the 5-digit user code of your choice.
To delete:
1. Press the Prog key.
2. Enter the 5-digit factory code twice.
Programming user pin
NOTE: One (1) user pin is allowed.
To add:
1. Press the Prog key 2 times.
2. Enter your 5-digit user code.
3. Enter the 5-digit user pin of your choice.
To delete:
1. Press the Prog key 2 times.
2. Enter your 5-digit user code.
3. Enter 0, 0, 0, 0, 0.
NOTE: If your safe does not appear to be working,
please check batteries before calling Sentry
Customer Care.
1
2
Getting started
2-English
Opening your safe for the fi rst time (keep
door open during setup):
1. Remove and discard the screw (if equipped) at
the base of the lock case.
2. Turn the electronic lock case to the
right (clockwise), from 12 o’clock to
2 o’clock, and remove.
• Insert 4 new AA batteries (not
included) to power this lock.
• Replace the electronic lock case and
turn to the left (to 12 o’clock) to reassemble.
3. Turn the key (if your safe is equipped with a key
lock) to the right so that the lock cylinder pops
out.
4. Enter the factory code (printed on the fi rst page
of this guide), then press the Prog/Enter key.
When the unlocked padlock icon ( ) appears,
you have four seconds to turn the handle down
to open. Try this several times before proceeding
to the next step.
To unlock safe:
Enter the 5-digit factory code, a pre-programmed
manager code, or a pre-programmed user code
(programming instructions to follow), then press
the Prog/Enter key. When the unlocked padlock
icon ( ) appears, you have four seconds to turn
the handle down to open.
To lock safe:
Close the door and return the handle to the
horizontal position. For greatest security, depress
the key lock (if equipped) with your fi nger.
NOTE: If your unit is equipped with a water-
resistant gasket. Additional pressure to the left
corner of the door may be required before the
handle can be returned to the horizontal position.
Battery replacement
The battery icon ( ) will light when the
batteries need to be replaced. No codes are erased
when old batteries are removed for replacement.
See “Opening your safe for the fi rst time”.
NOTE: If your safe does not appear to be working,
please check batteries before calling Sentry
Customer Care.
Gain entry with basic electronic lock cont.
2
1
2
Gain entry with advanced electronic lock
3
Gain entry with advanced electronic lock cont.
3
Signals
Your electronic-lock safe communicates by means
of several audio/visual signals.
Red (Error) LED + three beeps indicates
one of the following:
1. You have pressed Program key out of sequence.
2. You have entered an invalid code or user pin.
3. You have let 5 seconds or more elapse between
key presses.
4. Lights after three consecutive invalid codes are
input (2-minute delay mode).
Green LED only:
1. Comes ON after you enter a valid code and
remains lit during the 4-second period in which
the safe can be opened.
2. Comes ON in the Programming mode and
remains lit until you have fi nished entering
a 5-digit code.
Yellow LED only:
1. Comes ON when the batteries need to be
replaced.
Icon identifi cation
(Error) indicates one of the following:
1. You have pressed Program key out of sequence.
2. You have entered an invalid code.
3. You have let 5 seconds or more elapse between
key presses.
4. You have pressed a key while in delay mode.
(Program) Lights after pressing the Program
key and stays lit while programming a manager or
user code.
(Delay Mode) Lights after three consecutive
invalid codes are input and stays lit during the
2-minute delay mode.
Access codes
There are 3 possible ways to unlock and access
the safe:
NOTE: Maintain a record of the factory code, user,
and manager codes, and store them in a secure
location other than in this safe.
1. Factory code
(Found on the fi rst page of this guide) You can
always open the safe by entering the pre-set 5-digit
factory code. This code cannot be deleted.
2. Manager code
If you prefer to employ your own code, you can
program the safe to open to a 4-8 digit manager
code of your choice.
3. User code
If you wish to give someone else temporary access
to the safe, you can program a 4-8 digit user code
that can later be erased.
NOTE: Remember, once you have decided on your
access codes, open the unit fi rst then test it with
the door open. All zeros is an invalid code.
Programming the manager code
NOTE: One (1) manager code is allowed.
To add:
1. Press the Prog/Enter key , then enter the 5-digit
factory code and then press the Prog/Enter key .
2. An empty lit box icon ( ) means no manager
code is programmed. A boxed lighted * icon
( ) means a manager code is programmed.
3. Enter a 4 to 8 digit code and press the Prog/
Enter key to fi nish programming the code into
the unit.
To delete:
1. Press the Prog/Enter key, then enter the 5-digit
factory code and then press the Prog/Enter key.
2. A boxed lighted * icon ( ) indicates there is a
code programmed and can be deleted.
3. Press 0, 0, 0, 0, then the Prog/Enter key to
delete the manager code. (0, 0, 0, 0, Prog/
Enter).
NOTE: To return to the beginning when
programming a manager or user code, wait 5
seconds and the lock will time-out. You may then
start over.
Programming user code
NOTE: Six (6) user codes are allowed.
To add:
1. Press the Prog/Enter key 2 times, enter the
manager code and then press the Prog/Enter
key.
2. Use the << or >> to scroll between the lighted
boxes. An empty box icon ( ) means it is
available for a code entry; a boxed lighted *
icon ( ) means it is being used.
3. Enter a 4 to 8 digit code in the selected position
and press the Prog/Enter key to fi nish.
To delete:
1. Press the Prog/Enter key 2 times, enter the
manager code and then press the Prog/Enter
key.
2. Use the << or >> to scroll to the boxed lighted
* icon ( ) to be removed.
3. Press 0, 0, 0, 0, then the Prog/Enter key to
delete the selected user. (0, 0, 0, 0, Prog/Enter).
NOTE: To turn the beeper on or off, press the 0
key and then the Prog/Enter key. (0, Prog/Enter).
Produktspezifikationen
| Marke: | SentrySafe |
| Kategorie: | Sicher |
| Modell: | KSW0510 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit SentrySafe KSW0510 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sicher SentrySafe
15 Mai 2024
12 Mai 2024
3 Mai 2024
18 April 2024
28 März 2024
28 März 2024
21 März 2024
13 März 2024
8 März 2024
28 Februar 2024
Bedienungsanleitung Sicher
- Sicher Nedis
- Sicher Philips
- Sicher Thule
- Sicher First Austria
- Sicher Conrad
- Sicher Renkforce
- Sicher Abus
- Sicher Olympia
- Sicher Yale
- Sicher Perel
- Sicher Westfalia
- Sicher Burg Wächter
- Sicher Honeywell
- Sicher Filex
- Sicher First Alert
- Sicher Master Lock
- Sicher Phoenix
- Sicher Salvus
- Sicher Hard Head
- Sicher Kidde
- Sicher Royal Sovereign
- Sicher SereneLife
- Sicher Fluke
- Sicher Burgwachter
- Sicher VARO
- Sicher Handson
- Sicher Royal Safe
- Sicher Steren
- Sicher Technomax
- Sicher Tulox
- Sicher Durable
- Sicher Olymp
- Sicher Suncast
- Sicher Kreator
- Sicher Barska
- Sicher NOFIRE
- Sicher Homak Security
Neueste Bedienungsanleitung für -Kategorien-
17 August 2024
13 August 2024
12 August 2024
9 August 2024
8 August 2024
4 Juni 2024
30 Mai 2024
29 Mai 2024
25 Mai 2024
23 Mai 2024