Sensei LHSC-49 Bedienungsanleitung

Sensei Objektiv LHSC-49

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Sensei LHSC-49 (2 Seiten) in der Kategorie Objektiv. Dieser Bedienungsanleitung war fĂĽr 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Introduction
Thank you for choosing Sensei™.
The Sensei Screw-On Lens Hood mounts securely to your
camera lens to prevent stray light from entering, thus
eliminating glare and lens flare. The lens hood also helps to
minimize impact damage to the lens.
Instructions
1. Start with the camera facing away from you, and the TOP
label on the lens hood facing up.
2. Match up the lens hood with the thread on the inside of the
camera lens, and rotate the hood clockwise two full turns.
3. Keeping the TOP label aligned with the top of the lens, rotate
the locking collar on the lens hood clockwise until the collar
applies pressure to the front of the lens, securing the lens hood
in its correct position.
Note:
Improper installation of the lens hood may cause vignetting –
verify that the word “TOP” is facing upward on the hood and
the longer “petals” are oriented in top and bottom positions.
One-Year Limited Warranty
This SENSEI product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later. The
warranty provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of
this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by the
warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or mainte-
nance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with
specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Sensei Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Sensei along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.madebysensei.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
SENSEI is a registered trademark of the Gradus Group.
© 2015 Gradus Group LLC. All Rights Reserved.
2. 3.


Produktspezifikationen

Marke: Sensei
Kategorie: Objektiv
Modell: LHSC-49

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sensei LHSC-49 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten