Selleys SolarFlex Clear Bedienungsanleitung

Selleys Nicht kategorisiert SolarFlex Clear

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Selleys SolarFlex Clear (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Technical Data Sheet
Version 2.0
Updated 2 7/20209/
SELLEYS SOLARFLEX CLEAR
Page 1 of 2
WWW.SELLEYS.COM
All information contained in this Product Information Sheet is as accurate and up- -date as possible at the time of printing. Products can be expected to perform as indicated in this to
sheet, so long as application procedures and maintenance are followed as recommended. Any other warranties that may be implied are expressly excluded, except the consumer
guarantees under the Australian Consumer Law, where applicable, or any other non-excludable warranties under any State legislation, where applicable.
© 2020 DuluxGroup Pty Ltd; ABN 67 000 049 427
Head Oce 1 Gow Street, Padstow, NSW, 2211, Australia. T : 1300 555 205 (Aus); 0800 735 539 (NZ), Email support.selleysau@selleys.com el :
Description
Selleys SolarFlex™ High Performance
SMP Sealant Range is more durable than
conventional polyurethane sealants, even
in harsh weather conditions.
Product Information
Packaging
Size
Cartridge
300 grams
Uses
For sealing, bonding and lling
Suitable for wet or dry surfaces
For interior/exterior applications
Suitable for use on glass, metal, timber,
brick, concrete, tiles and most plastics#
Technical Features
Superior Weather & UV resistance
No primer required
Long lasting exibility
Adhesion to wet surfaces
Better extrudability (>5°C)
Better Curing (>5°C)
Indoor/outdoor
Paintable
Mould resistance
Non-bubbling
Non-slumping
Technical Details
Property
Typical Result
Technology
Moisture curing
silyl-modied
polymer (SMP)
Colour
Clear
Density
~1.05 g/mL
Application
Temperature
5 to 35°C
Tooling Time
(23°C, 50% R.H.)
~ minutes 25
Skin Time
(23°C, 50% R.H.)
45 to 55minutes
Cure Rate
(23°C, 50% R.H.)
2.5 to 3mm/24hrs
Slump
0mm
Tensile Strength
(DIN 53504)
1 ± 0.1MPa
Shore A
Hardness
25 ± 5
Elongation at
Break (DIN
53504)
~ 180%
Modulus at 100%
Elongation
(DIN 53504)
0.6 ± 0.1MPa
Movement
Capability
(ISO9046
modied)
± 20%
Service
Temperature
0 to 70 C ˚
VOC Content
~ g/L 35
Indicative data only, not intended for
preparation of specications
Approvals/Standards
Meets GBCA VOC limits for general
purpose and architectural sealants.
Complies with AS/NZS4020: Potable water
contact. Cured Sealant at Area to volume
ratios up to 2500mm2/L - tested at water
temperatures up to 40°C).
Surface Preparation
Ensure surface is clean, dry and free from
dust, grease, old or crumbling sealant.
Technical Data Sheet
Version 2.0
Updated 2 7/20209/
SELLEYS SOLARFLEX CLEAR
Page 2 of 2
WWW.SELLEYS.COM
All information contained in this Product Information Sheet is as accurate and up- -date as possible at the time of printing. Products can be expected to perform as indicated in this to
sheet, so long as application procedures and maintenance are followed as recommended. Any other warranties that may be implied are expressly excluded, except the consumer
guarantees under the Australian Consumer Law, where applicable, or any other non-excludable warranties under any State legislation, where applicable.
© 2020 DuluxGroup Pty Ltd; ABN 67 000 049 427
Head Oce 1 Gow Street, Padstow, NSW, 2211, Australia. T : 1300 555 205 (Aus); 0800 735 539 (NZ), Email support.selleysau@selleys.com el :
Directions for Use
Cut tip and attach nozzle. Insert in caulking
gun. Cut nozzle to required size.
Apply product, ensuring it is forced into the
joint, with good contact to surfaces. Tool
with a soapy solution before skinning
occurs.
Tips
For neater joints, mask sides before
applying sealant and remove tape before
sealant skins.
Clean Up
Uncured product may be removed with
mineral turps.
Cured product can be removed by
scraping or sanding or with the help of
Silicone Remover.
Storage
Store in cool, dry conditions below
30°C.
Use within 6 months of opening.
Limitations
Cannot be painted with solvent based
paints. If required, paint with a water-
based paint rst.
Not for permanent water immersion or
below water-line use.
#
Not for Polyethylene, Polypropylene or
Teon.
Warnings, First Aid and Shipping Information
This information can be located on the product SDS found
through our website www.selleys.com


Produktspezifikationen

Marke: Selleys
Kategorie: Nicht kategorisiert
Modell: SolarFlex Clear

Brauchst du Hilfe?

Wenn Sie Hilfe mit Selleys SolarFlex Clear benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Selleys

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-