Seco-Larm Enforcer EV-Y2201-A2WQ Bedienungsanleitung

Seco-Larm Sicherheitskamera Enforcer EV-Y2201-A2WQ

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Seco-Larm Enforcer EV-Y2201-A2WQ (4 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war fĂĽr 51 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
4- - in 1 HD TVI, CVI, AHD, Analog
Rollerball Cameras
Manual
EV- - Y2201 AMWQ shown
• 1080p Resolution
•
ICR Module
•
3D- NR (3D Digital Noise Reduction)
•
DWDR (Digital Wide Dynamic Range)
•
Joystick OSD control
• Heavy- - duty vandal resistant design
•
Rugged, weatherproof (IP65) construction
•
Split- glass design eliminates IR reflection
•
Cables concealed in bracket to
prevent tampering
Features:
Model #
Resolution
Voltage
Style
Color
EV- 1- Y220 A2WQ
1080p
12VDC
Rollerball
White
EV- - Y2201 A2GQ
1080p
12VDC
Rollerball
Gray
EV- 1- Y220 AMWQ
1080p
12VDC
Rollerball
White
EV- - Y2201 AMGQ
1080p
12VDC
Rollerball
Gray
ENFORCER 4- - in 1 HD Rollerball Cameras (TVI, CVI, AHD, Analog)
2 SECO- LARM U.S.A., Inc.
1x
Rollerball camera
4x
Screws
4x
Screw anchors
1x
DC plug with terminal block
1x
Hex wrench
2 x
Rubber plugs*
1x
Small screwdriver*
1x
Manual
Specifications:
Parts List:
311/
16
” (93mm)
215/
16
”
(75mm)
Model
EV- - Y2201 A2WQ
EV- - Y2201 A2GQ
EV- - Y2201 AMWQ
EV- - Y2201 AMGQ
Housing color
White
Gray
White
Gray
Type
Fixed Rollerball Camera
Varifocal Rollerball Camera
Formats
TVI (Default) / CVI / AHD / Analog
CMOS
1/2.9" 2MP Sony CMOS
Resolution (HD)
1920x1080
TV Lines (Analog)
1200TVL
3D- NR
Yes
2D- NR
Yes
DWDR
Yes
OSD (On-Screen Display)
Yes
Cable OSD control
Yes
Video output
1.0Vp-p complex video output
Megapixels
2MP
Lens
2.8mm ICR
2.8~12mm ICR
Viewing Angle
90°
30°~90°
# of IR LEDs
24
36
IR Range
Up to 50ft (15m)
Up to 100ft (30m)
FPS
30FPS
F Stop
F1.4
F1.4 - F1.6
Minimum
illumination
(IR On)
0L ux
(IR Off)
Color: 0.1Lux/F1.4, B/W: 0.01Lux/F1.4
Gamma correction
0-1
S/N Ratio
50dB
DSS (Digital Slow Shutter)
Yes
Shutter control
Yes
Gain control
Yes
White balance
Auto, Day & Night
Operating voltage
12VDC
Current Draw
(IR On)
150mA
260mA
(IR Off)
8 0mA
8 0mA
IP Rating
IP65
Operating temperature
-4°~131° F (- 20°~55° C)
Dimensions
311/16"x215/16" (93x75 mm)
43
/4"x33/4
" (120x95 mm)
Weight
13.1-oz (370g)
1- - lb, 10.1 oz (740g)
Overview:
EV- - xQ:Y2201 A2
EV- - Q:Y2201 AMx
43/
4
” (120mm)
33/
4
”
(95mm)
Zoom
Focus
- -*EV Y2201 AMxQ only
ENFORCER 4- - in 1 HD Rollerball Cameras (TVI, CVI, AHD, Analog)
SECO- LARM U.S.A., Inc. 3
1.
Use the camera within the given temperature
and voltage limits.
2. Do not point the camera at the sun. Heat could
damage the camera, even when not in use.
3. Do not subject the camera to strong vibrations.
4. Do not mount the camera in areas exposed to
radiation, strong magnetic fields, or strong
electrical signals.
Before Starting:
1. Run a 12VDC power supply wire and a video
cable with a male BNC connector through the
wall to where the camera is to be mounted.
2. Loosen the set screws with the included hex
wrench and remove the case from the base.
NOTE: The camera ball is NOT attached to the case
or the base. It sits loose inside the case. Therefore,
be very careful when removing the case from the
base. Do not drop the camera ball.
3. Mount the base to the wall using the four
included mounting screws. If the wall is made
of dry wall, brick, or similar material, it may be
necessary to use the included screw anchors.
4. Run the camera’s BNC and power connectors
through the camera base, and connect to the
video and power wires that were run through
the wall.
Installation:
6. and Put the case over the camera ball onto the base.
7. Holding the case loosely on the base, turn the camera
ball to the desired direction. Use the included small
screwdriver to adjust the zoom and focus of the camera
ball if needed, via the holes marked “ZOOM” and
“FOCUS” on the top of the camera ball
(EV- - Y2201 AMxQ only).
NOTE: Before securing install make sure to check both the dayation,
and night images. Adjust the camera ball in a way so that there
are no objects blocking the camera’s view.
8. Use the OSD controller joystick to adjust camera
settings (see the separate OSD manual).
9. tighten Once the ball is pointing in the desired direction,
the outer case ring to secure the camera in its position.
10. Do a final test of the video camera and monitor.
11. Insert the rubber plugs over the zoom and focus holes
to prevent tampering Q only) -(EV Y2201-AMx .
Overview:
Camera ball
Case
Base
Female BNC connector
DC Plug with
terminal block
DC Jack
OSD Controller
EV A2x- -Y2201 Q shown above.
Optional Mounting Brackets:
Wall Mount
EV-DWLWQ
Ceiling Mount
EV-DCLWQ
Conduit Box
EV-DSLWQ
Conduit Drop
EV-DDLWQ
OSD Controller Settings:
To set format via the OSD controller, press
the controller in the direction of the desired
setting, hold for 5 seconds, and release
when the camera restarts.
See chart below.
Direction
Format Setting
Up
CVI
Down
TVI
Left
CVBS
Right
AHD
Screws (2 shown, use all
4 in installation)
UP
White models shown, gray mounting brackets also available.
Important: Do not cut any wires as the warranty will be voided.

Produktspezifikationen

Marke: Seco-Larm
Kategorie: Sicherheitskamera
Modell: Enforcer EV-Y2201-A2WQ

Brauchst du Hilfe?

Wenn Sie Hilfe mit Seco-Larm Enforcer EV-Y2201-A2WQ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sicherheitskamera Seco-Larm

Seco-Larm

Seco-Larm Enforcer EV-Y6201-A3WQ Bedienungsanleitung

23 März 2024
Seco-Larm

Seco-Larm Enforcer EV-Y2201-A2WQ Bedienungsanleitung

6 März 2024

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Speco Technologies

Speco Technologies O2PTZ34D5W Bedienungsanleitung

14 August 2024
ZKTeco

ZKTeco BL-34F26L Bedienungsanleitung

11 August 2024
Moxa

Moxa VPort 26 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 36 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L54160N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort P06 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPORT P06-1MP-M12-CAM80 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-DO-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 26A-1MP Bedienungsanleitung

27 Juni 2024