Scott Spark 940 Bedienungsanleitung

Scott Fahrrad Spark 940

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Scott Spark 940 (24 Seiten) in der Kategorie Fahrrad. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
SPARK MY22
MANUAL
2ENGLISH / SPARK TECH MANUAL
Technical Data:
Seatpost: 31.6mm
Seatpost Clamp: 34.9mm
Travel:
Rear 120mm
Front: RC 120mm
Non RC 130mm
Shock Length: 165mm
Shock Stroke: 45mm
Hardware M/Frame: Trunnion
Hardware Linkage: 20mm Bush x
10mm Bolt
BB Housing: 92x41mm
Chainring Max: 38 Tooth
Chain Line: 55mm
Tyre Width Max: 2.4 Inches
Geometry:
Tyre sizes often vary from brand
to brand. Always ensure the frame,
linkage & swingarm tyre clearance
is adequate when replacing the
rear tyre.
N
Q
P
3
ENGLISH / SPARK TECH MANUAL
MY22 RC // +0,6° head cup //
120mm fork
Small Medium Large X/Large
A HEAD TUBE ANGLE 67.2° 67.2° 67.2° 67.2°
B HEAD TUBE LENGTH 90 mm 90 mm 105.0 mm 115.0 mm
C TOP TUBE HORIZONTAL 562 mm 590 mm 614 mm 642 mm
D STANDOVER HEIGHT 758 mm 765 mm 776 mm 799 mm
E BB OFFSET -45 mm -45 mm -45 mm -45 mm
F BB HEIGHT 330 mm 330 mm 330 mm 330 mm
G WHEEL BASE 1,129 mm 1,159 mm 1,190 mm 1,231 mm
I BB CENTER TO TOP OF SEATTUBE 415.0 mm 440.0 mm 490 mm 540 mm
J SEAT ANGLE 75.9° 76. 76.6° 76.9°
K CHAINSTAY 437.5 mm 437.5 mm 437.5 mm 437.5 mm
L REACH 411 mm 441 mm 471 mm 501 mm
M STACK 602.5 mm 602.5 mm 616 mm 625 mm
N STEM LENGTH 50 mm 60 mm 70 mm 80 mm
P FORK LENGTH 530 mm 530 mm 530 mm 530 mm
Q MAX POST INSERTION 150 mm 175 mm 225 mm 275 mm
CRANK LENGTH 170 mm 175 mm 175 mm 175 mm
MY22 900 // -0, head cup //
130mm fork
Small Medium Large X/Large
A HEAD TUBE ANGLE 65. 65.8° 65.8° 65.8°
B HEAD TUBE LENGTH 90 mm 90 mm 105 mm 115 mm
C TOP TUBE HORIZONTAL 561 mm 589 mm 613 mm 641 mm
D STANDOVER HEIGHT 759 mm 767 mm 778 mm 801 mm
E BB OFFSET -43.5 mm -43.5 mm -43.5 mm -43.5 mm
F BB HEIGHT 331.5 mm 331.5 mm 331.5 mm 331.5 mm
G WHEEL BASE 1,145 mm 1,174 mm 1,205 mm 1,236 mm
I BB CENTER TO TOP OF SEATTUBE 415mm 440 mm 490 mm 540 mm
J SEAT ANGLE 75. 75. 76.4° 76.
K CHAINSTAY 437.5mm 437.5mm 437.5mm 437.5mm
L REACH 410 mm 440 mm 470 mm 500 mm
M STACK 607.5 607.5 617.7 mm 627 mm
N STEM LENGTH 50 mm 60 mm 60 mm 70 mm
P FORK LENGTH 540 mm 540 mm 540 mm 540 mm
Q MAX POST INSERTION 150 mm 175 mm 225 mm 275 mm
CRANK LENGTH 170 mm 175 mm 175 mm 175 mm
4ENGLISH / SPARK TECH MANUAL
EASY TECHNICAL STEP
IMPORTANT TECHNICAL STEP
WARNING/CAUTION
THREADLOC
NO GREASE
WITH GREASE
BEARING FIT
TORQUE CHECK
PLEASE TAKE NOTE OF THE BELOW
ICONS THROUGHOUT THIS MANUAL
FOR SAFE PRACTISE.
5
ENGLISH / SPARK TECH MANUAL
Hangers & Axles:
The Spark has only one rear hanger, this is the SRAM UDH.
This is available from your SRAM agent, also available via an Authorised Scott Dealer.
286000 - SCO Dropout Sram UDH 21
The UDH must be assembled without g m
reverse thread
6ENGLISH / SPARK TECH MANUAL
The Axle must be assembled with grease, and torqued
to 10Nm.
The new rear axle is specific for the Spark and contains a “plug in“ tool containing
T30/T25 and M6 Hex key:
290016 - SCO Axle RWS Rear 148x12 Spark Plug 22
7
ENGLISH / SPARK TECH MANUAL
Rear Brake Mounting:
The brake calliper mount is a standard post mount with a specific adaptor for the
Spark, this is available in 160 and 180mm only. (No live valve option).
290010 - SCO Brake Mount Spark 22
180mm
160mm
The 180mm mount will need conical washers, as in previous years.
8ENGLISH / SPARK TECH MANUAL
Chain Protectors:
The Chainstay Protectors will come in two options:
290017 - SCO Chainsuck Protector Spark 22
288539 - SCO CS/SS Protector Glue Spark CB 22
288540 - SCO CS/SS Protector Glue Spark AL 22
10 ENGLISH / SPARK TECH MANUAL
Headset:
The Spark headset is unique, it has several set up variables:
288251 - SYN Headset ZS56/28.6 - ZS56/40 MTB
This will be bearing, crown race, and compression ring!
290060 - SCO Headset Cup Kit Spark 22
This will include two cups of 0 degree & 0.6 degree. Size Specific
Do not use a standard Headset Removal Tool to remove the cups.
11
ENGLISH / SPARK TECH MANUAL
Headset indication and orientation, it is important to have the headset installed
correctly depending on the setup. There are two types, 0° and 0.6°, these can be
identified from the stamp on the inner surface of the headset cup.
For 0.6° this can be installed at + or – but it is essential that the angle indication
markers on the headset are set opposite to each other, top facing forward and
bottom facing backwards (or vice versa).
12 ENGLISH / SPARK TECH MANUAL
The headset assembly must follow the below no matter which bar/stem system is
being used.
13
ENGLISH / SPARK TECH MANUAL
There are three separate Stem Spacer Kits & one Headset Spacers Kit:
290059 - SCO Stem Spacer/top cap SY MTB XC 22
290057 - SCO Stem Spacer/top cap SY MTB Combo 22
290058 - SCO Stem Spacer/top cap SY MTB DC 22
The Headset Spacer Kit will contain 3 x 5mm, 2 x 10mm, 1 x 20mm Spacers:
290056 SCO - Headset Spacer Kit IC MTB 22
14 ENGLISH / SPARK TECH MANUAL
Cable Guides & Covers:
The MY22 Spark’s cable routing is all internal, the follow guides & covers are available:
290021 - SCO Cable/Shock DT Cover Spark 22
290054 - SCO Handlebar Cableguide Kit MTB IC 22
290020 - SCO Cableguide & BB Cover Spark 22
17
ENGLISH / SPARK TECH MANUAL
Sag:
1. Make sure before any adjustment is made that your shock and forks are in the
open position. To do this press the twinloc upper silver lever twice.
2. With the shock pump attached to the rear shock valve, pump your desired
pressure into the shock. Once the pressure
is achieved, remove the pump. Then slowly
compress and decompress your shock
through 20% of its travel 10 times. This
will equalize the positive and negative air
chambers, if needed add or reduce pressure
and repeat.
3. Once your desired pressure is reached sit on your bike in your usual riding
position (in your riding gear: if you carry a bag/Hydration-system put it on,) don’t
“bounce” the suspension while doing this, use a wall or a friend for support if
needed. Do not sit on your bike with the shock pump attached to the bike.
4. Use the markings indicated in the linkage and front triangle to check your sag
position. Adjust the pressure as required for your personal sag setting.
5. Recommended Sag is 20% - 25%
01 02 03


Produktspezifikationen

Marke: Scott
Kategorie: Fahrrad
Modell: Spark 940

Brauchst du Hilfe?

Wenn Sie Hilfe mit Scott Spark 940 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Fahrrad Scott

Bedienungsanleitung Fahrrad

Neueste Bedienungsanleitung für -Kategorien-