Scosche TA2074B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Scosche TA2074B (1 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
© 2006 SCOSCHE INDUSTRIES, INC. SI 07/06 - TA2074B (3000003)
If you have any further questions, call our toll free technical help line at: 1-800-621-3695x3
TA2074B
IN-DASH DIN RADIO INSTALLATION KIT FOR
2007 TOYOTA FJ CRUISER
LIABILITY DISCLAIMER
This instruction booklet is based on carefully documented data and research of automobile dash disassembly, wire harness/
codes and information pertaining to installation of this kit (TA2074B) in 2007 Toyota FJ Cruiser Kit Vehicles. Scosche Industries,
Inc. can not be held responsible for discrepancies/inconsistencies that may occur due to the automobile manufacturing changes
or options, or damage that may occur in the automobile during the installation of components while using this booklet.
INTRODUCTION / PRELIMINARY
2
For Factory Wiring Codes go to: www.scosche-cars.com
FACTORY WIRING CODES
CAR STEREO CONNECTORS
PROVIDE EASY CONNECTION OF YOUR CAR
STEREO TO FACTORY WIRING HARNESS.
TA02
1987-UP Toyota
MOUNTING THE RADIO
DIN MOUNT
1. Slide DIN sleeve into kit from front.
2. Bend tabs to secure DIN sleeve to panel.
3. Slide radio into DIN sleeve until sanps into place.
KIT PANEL ASSEMBLY
A. ATTACHING THE REAR BRACKETS:
1. Align the two (2) screw hole locations to the
matching locations on pocket. When aligned,
slide the bracket together. Screw the two (2)
supplied screws to screw locations.
This premium installation kit is for 2007 Toyota FJ Cruiser vehicles. Included are all the parts you
need to mount your car stereo/cassette or CD player into your vehicle's dash. Refer to the individual
instruction in this manual to remove your vehicle's factory radio and assemble the kit.
CAUTION:
DISCONNECT YOUR VEHICLE'S NEGATIVE BATTERY TERMINAL BEFORE THE INSTALLATION TO HELP
PREVENT ELECTRICAL DAMAGE. WE RECOMMEND THE USE OF A VOLT/OHN METER OVER A TEST LIGHT
TO CHECK WIRING. A TEST LIGHT OR GROUNDED WIRE PROBE CAN CAUSE DAMAGE TO THE VEHICLE'S
COMPUTER AND/OR DIAGNOSTIC SYSTEMS. AVOID ALL FACTORY AIRBAG WIRING - AIRBAGS CAN
ACCIDENTALLY DEPLOY CAUSING SERIOUS INJURY OR DEATH.
NOTES:
• See your vehicle's instructions for any special tools your installation might require.
• Read all instructions accompanying your car stereo/cassette player for proper wiring and mounting
instructions.
5742L LEFT
BRACKET
5742R RIGHT
BRACKET
6122 REAR
SUPPORT BRACKET
6120
MOUNTING
PANEL
6121
TRIM
RING
6122 REAR SUPPORT
MOUNT BRACKET
6120
MOUNTING
PANEL
CAUTION:
REAR SUPPORT AVAILABLE
SEPARATELY. REAR
SUPPORTING THE RADIO
ADDS TO THE INSTALLATION’S
STRUCTURAL INTEGRITY.
VARIOUS REAR
SUPPORT BRACKETS
RADIO'S
MOUNTING
SLEEVE
DIN MOUNT
RADIO
TRIM RING
ISO MOUNT
1. Slide left and right brackets into slots found on either side
of the kit.
2. Slide radio into ISO brackets and screw into place with
radio supplied screws.
DIN MOUNT
RADIO
TRIM RING
2007 TOYOTA FJ CRUISER
Radio Removal
1. Extract one Phillips Screw located on each trim bezel that runs along the left and right side of the
radio.
2. Extract one Phillips Screw located on each side of panel that surrounds the factory radio. Unsnap,
disconnect and remove.
3. Extract four 10mm bolts securing factory radio. Lift away disconnect and remove.


Produktspezifikationen

Marke: Scosche
Kategorie: Kfz-Bausatz
Modell: TA2074B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Scosche TA2074B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kfz-Bausatz Scosche

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-