Scosche BFTA Bedienungsanleitung

Scosche Kfz-Bausatz BFTA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Scosche BFTA (12 Seiten) in der Kategorie Kfz-Bausatz. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

BFTAK

HANDS-FREE BLUETOOTH® INTERFACE FOR SELECT

2005-UP SELECT TOYOTA, SCION, LEXUS VEHICLES

iPhone is a trademark of Apple Inc., registered in the US and other countries.

SI 02/10-BFTAK (3000493)

SAT-READY RADIO IS REQUIRED FOR

ALL APPLICATIONS LISTED BELOW

APPLICATIONS HARNESS APPLICATIONS

Scosche’s BFTAK Bluetooth Interface will allow you to wirelessly communicate with your

Bluetooth enabled celular phone and Stereo Bluetooth transmitters. The BFTAK communi-

cates directly with your factory radio allowing you direct control of hands-free, voice dialing,

and A2DP functionality. These interfaces maintain the original integrity of important diagnostic

and safety systems within the vehicle. For up-to-date applications or any Technical asistance

with this product, call Scosche Tech support at (800) 621-3695 Ext 3.

LEXUS

GS 2006-07

IS250/350 2006-08

RX350 2005-08

SCION

tC 2005-06

xA 2005-06

xB 2005-06

xB 2008-09

xD 2008-09

TOYOTA

4RUNNER 2005-09

AVALON 2005-09

CAMRY 2007-09

COROLLA 2005-09

FJ CRUISER (PREMUIM/JBL RADIOS ONLY) 2007-09

HIGHLANDER 2005-09

LAND CRUISER 2005-07

MATRIX (NON-JBL RADIOS ONLY) 2009

MATRIX 2005-08

PRIUS W/NAVIGATION ONLY 2005-08

RAV4 2006-09

SEQUOUIA 2006-09

SIENNA 2005-09

SOLARA 2005-09

TACOMA (NON-JBL RADIOS ONLY) 2009

IMPORTANT CELL PHONE DISCLAIMER: READ FIRST!

• SomecellularphonemanufacturersutilizeaBluetooth microprocessor that

unfortunately is not compatible with the BlueFusion system. Some phones

from Palm, LG (Envy/Envy2), Samsung (Impression) and HTC (Omni) have

exhibited operating difficulties with the BlueFusion system. If you own these

models or other models from these manufacturers call Scosche Tech Support

for the latest updated phone incompatibility list. (800) 621-3695.

• ThisBlueFusiondevicewillpairtoONEphoneattime.

• Duetovariancesincellphonemanufacturing,CallerIDfunctionsmayvary

from what is printed in this manual.

• BlueFusiondoesnotsupportphonebookprofiles.

• Scoschedoesnotguarantee100%compatibilitywithallBluetooth

cellphones.

SAT1MainMenu ch001

CH 001

1VoiceCmd

CH 002

2Incoming

CH 003

3Redial

CH 100

6->SAT

CH 005

5Outgoing

CH 004

4Missed

TEXT

TYPE

SEEK TYPE

SCAN

TYPETYPE

SOUND ASL

BLUEFUSION

WORKS WITH

NAVIGATION RADIOS

AND

NON-NAVIGATION RADIOS

PWR

RADIO COMPATABILITY

INSTALLATION

NOTE: RADIO ILLUSTRATIONS ABOVE ARE OF TYPICAL. THERE ARE ADDITIONAL

RADIO MODEL/ STYLES THAT ARE COMPATIBLE WITH BLUEFUSION.

YOUR CAR MAY DIFFER.

TECH TIP: When mounting the BFTAK make sure to be clear of all moving

mechanical device that may hit or damage the interface. Keep away from any

hot surface areas like heater ducts direct sun light and metal surface areas that

have the potential of getting hot.

BFTAK INTERFACE INSTALLATION

1. Carefully remove the radio from the dash of the vehicle (For assistance you

can contact Scosche Tech Support at 800-361-3695).

2. Plug the male 12-pin connector of the BFTAK harness into the female 12-pin

port on the back of the radio, then connect the factory male 12-pin connector

into the female 12-pin connector on the BFTAK harness.

3. Plug the male 20-pin connector of

the BFTAK harness into the female

20-pin port on the back of the radio,

then connect the factory male

20-pin connector into the female

20-pin connector on the BFTAK

harness.

4. Plug the male 24-pin connector of

the BFTA harness into the BFTAK

interface.

12 Pin Male Plug

To Factory Harness

12 Pin Factory Male Plug12 Pin Female Plug

FACTORY

RADIO

Microphone

3 Pin Male Plug

20 Pin Male Plug

20 Pin Female Plug

TECH TIP: Aim the microphone in the direction of the driver’s headrest.

MICROPHONE INSTALLATION:

1. Attach the microphone to the headliner above the rear view mirror.

2. Carefully route the microphone cable behind the headliner and down the “A”

(front most) pillar. Use caution when routing cable and avoid sharp edges or

moving metal parts.

3. Route the cable to the BlueFusion interface location and plug it into the 3-pin

connector on the Scosche “T “harness.

PAIRING YOUR CELLULAR PHONE

MICROPHONE INSTALLATION

IMPORTANT NOTE: Your Bluetooth cellular phone must be paired with the

BlueFusion system before use. Once the initial pairing process has been

completed, your phone should easily connect and disconnect to BlueFusion

during normal use.

PAIRING INSTRUCTIONS:

1. Once the hardware has been properly installed, insert the key and start the

vehicle. The BlueFusion interface needs to read the vehicle’s ignition codes to

properlyinitialize.

2. Press the “AM/SAT”, or “SAT” button on the radio to get to the XM Sat radio

source. On Toyota Highlander: PRESS FM2 then AM to access the NOTE:

SAT Radio source.

3A.Vehicle’s with Satellite Radio installed: Press #6 preset button or touch

the “->Bluefusion” button on Navigation radios to get to BlueFusion screen.

3B. Vehicle’s without Satellite Radio installed. BlueFusion menu screen will

be displayed at this step. You do not have to use Preset #6 Button or the

“->Bluefusion” touch screen button to switch between Satellite and

BlueFusion screens.

4. Once in the BlueFusion mode, you will hear a beep tone indicating that

BlueFusion is in pairing mode. (BlueFusion enters pairing mode automatically

when the Ignition is turned on and no phone is currently paired.)

5. From your phone’s Bluetooth menu, perform a search for new devices (refer

to your cell phone user manual). The phone should display “BlueFusion”

6. Select [pair to] BlueFusion and enter pin code 0000 when prompted. This will

complete the pairing process. (Once your phone paired with BlueFusion, the

beep tones should stop and BlueFusion is now ready for use.)

Produktspezifikationen

Marke:	Scosche
Kategorie:	Kfz-Bausatz
Modell:	BFTA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Scosche BFTA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Kfz-Bausatz Scosche

Scosche BTFreq Pro Bedienungsanleitung

5 September 2024

Scosche KA2091B Bedienungsanleitung

22 August 2024

Scosche auxMIC Bedienungsanleitung

21 August 2024

Scosche NN1640B Bedienungsanleitung

21 August 2024

Scosche TA2074B Bedienungsanleitung

21 August 2024

Scosche TA2077B Bedienungsanleitung

21 August 2024

Scosche TA2079B Bedienungsanleitung

21 August 2024

Scosche NN1648B Bedienungsanleitung

21 August 2024

Scosche SI2229B Bedienungsanleitung

21 August 2024

Scosche VO4152B Bedienungsanleitung

21 August 2024

Bedienungsanleitung Kfz-Bausatz

Neueste Bedienungsanleitung für -Kategorien-

Parrot Minikit Chic Bedienungsanleitung

29 September 2024

Nedis DTCTCO20WT Bedienungsanleitung

22 September 2024

BURY UNI Bedienungsanleitung

21 September 2024

Gembird Bluetooth Car Kit BTCC-002 Bedienungsanleitung

19 September 2024

BURY Easytouch Pro Bedienungsanleitung

18 September 2024

Alpine HCE-C157D Bedienungsanleitung

18 September 2024

Pyle PL91HRTN Bedienungsanleitung

17 September 2024

BURY CV 9040 Bedienungsanleitung

14 September 2024

Alpine KCE-425i Bedienungsanleitung

14 September 2024

Alpin 61431 Bedienungsanleitung

9 September 2024