Schneider SRVSRK1 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Schneider SRVSRK1 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Important Safety Information
Read the instructions carefully and look at the equipment to become familiar
with the device before trying to
install, operate, service or maintain it. The
following special messages may appear throughout this document or on
the
equipment to warn of potential hazards or to call attention to information that
claries or simplies a procedure.
The addition of this symbol to a Danger or Warning product
safety label indicates
that an electrical hazard exists that will
result in personal injury if the instructions are
not followed.
This is the safety alert symbol. It is used to alert you to potential
personal injury
hazards. Obey all safety messages that follow
this symbol to avoid possible injury or
death.
DANGER
DANGER will result inindicates a hazardous situation which, if not avoided, death or serious injury.
WARNING
WARNING
indicates
a
ha ardouz s
situation
which,
if
not
avoid ,ed
coul r ultd es
in
death
or
serious
injury.
CAUTION
CAUTION
i icatesnd
a
hazard sou
sit tionua
which,
if
not
avoi ,ded
c l r ultou d es
in
mi rno
or
m teodera
injury.
NOTICE
NOTICE
is
used
to
address
practices
not
related
to
physical
injury.
Installation Guide
Rail Kit for Easy UPS On-Line Rack-mount Series
2
Rail Kit for Easy UPS On-Line Rack-Mount Series
Product Description
These rail kits are ideal for mounting rack Easy UPS in a rack. These rail kits can support equipment measuring up to
16.75" (43cm) to 17.7" (45cm) wide. SRVSRK1 can support equipment with a maximum weight of 60kg and
SRVSRK2 can support up to 100 kg.
Package Contents
The packaging is recyclable; save it for reuse or dispose of it properly.
SRVSRK1
(1)
Left rail silder
(1)
Right rail silder
(6)
Cage nut
(4)
Fixing stud
SRVSRK2
(1)
Left rail silder
(1)
Right rail silder
(6)
Cage nut
( ) 14
M6 Screws
3
Rail Kit for Easy UPS On-Line Rack-Mount Series
Installation
Install SRVS RK1
Please follow below steps to install SRVSRK1.
1. Insert 4 pieces of xing nuts into the following locations of rail sliders. Be sure x them rmly. Then, pull apart
two ends of rail sliders and place them in a chassis. Be sure the pulling distance meets the depth of rack chassis
and place xing studs to the corresponding holes on supporting columns. For example, if depth of rack chassis is
700mm, please pull the length of rail sliders is 700mm.
2. Use 4 pieces of M6 screws to mount rail sliders into chassis. See below chart.
3. According to UPS height, put 6 pieces of nuts on proper location.
Fixing stud
Fixing stud
Fixing stud
Fixing stud
M6 screws
M6 screws
M6 screws
M6 screws
Cage nuts x 3
Cage nuts x 3
Cage nuts x 3
Cage nuts x 3


Produktspezifikationen

Marke: Schneider
Kategorie: Nicht kategorisiert
Modell: SRVSRK1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Schneider SRVSRK1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Schneider

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-