Saturn ST-CC7145 Bedienungsanleitung

Saturn Zu fordern ST-CC7145

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Saturn ST-CC7145 (16 Seiten) in der Kategorie Zu fordern. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
ST-CC7145
STEAM IRON
ПАРОВОЙ УТЮГ
ПАРОВА ПРАСКА
2 3
GB
STEAM IRON
Dear Buyer!
We congratulate you on having
bought the device under trade name
“Saturn”. We are sure that our
devices will become faithful and
reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature change
(e.g. when the unit is moved from
freezing temperature to a warm
room) may cause condensation
inside the unit and a malfunction
when it is switched on. In this case
leave the unit at room temperature
for at least 1.5 hours before
switching it on.
If the unit has been in transit, leave
it indoors for at least 1.5 hours
before starting operation.
Main body
IMPORTANT SAFE GUARDS
1. Please be sure your electricity supply
is 220-230V, 50Hz. The device is to be
plugged in a grounded outlet.
2. Use this unit only as described in this
manual. Other uses not recommended
may cause bums or electric shock.
3. This unit is not a toy. Close
supervision is required when using unit
near children, pets and plants.
4. Steam produced by unit is hot and
pressurized. Care must be taken to
avoid burns o
r
other injuries. Never
point steam nozzle at people or pets.
5. Please do not ill the steamer. Always
hold the unit in upright position to avoid
water spilling out.
6. Do not shake the unit to avoid hot
water splashing out.
7. To protect against electrical shock, do
not immerse unit, pug or cord in water,
or spray with liquids.
8. Do not leave the steamer unattended
while it is in operation,
9. Always allow the unit to cool
completely before refilling water
cleaning or storing.
10. A ways disconnect the unit from
electrical outlet when (filing or remove
water as well as water tank empty or
unit not being used.
11. No detergent or chemicals can be
added into the water tank or it will
cause damage. Distilled or de-
mineralized water is recommended.
12. Do not place the unit or any parts
near an open (lame, cooking or other
heating appliance.
13. To disconnect, grasp the plug and
pull it from socket. Never drag the cord.
14. Nozzle and accessories become hot
during use. To avoid injuries, do not
touch nozzle while using this appliance.
Do not attempt to change accessories
while unit is emitting steam.
15. To avoid burns from spilling hot
water, always hold the unit upright and
do not overfill the water tank above the
MAX line.
16. Use the unit carefully with a lifted
angle not more than 35 degrees in any
direction to avoid excess water to spill
out from the steam head.
17. To reduce the risk of contact with
hot water emitting from steam vents,
hold the unit away from body and check
for signs or condensation or leakage.
18. Do not operate the unit if steam
opening is blocked. If this occurs,
immediately cease usage and unplug
the unit from the outlet.
19. Alter each use, always drain the
water remained in the water tank
thoroughly to avoid mineral build up in
the heating plate.
20. This appliance is not intended for
use by children or other persons without
assistance or supervision if their
physical, sensory or mental capabilities
prevent them from using it safely.
Children should be supervised to ensure
1. Power switch
2. Water inlet cover
3. Steam nozzle
4. Water window
5. Brush
6. Lint remover
7. Water cup
4
that they do not play with the appliance.
21. Do not use the device if its
component parts (the power cord, plug,
etc.) are damaged. Do not attempt to
repair the device yourself. Please
contact the nearest authorized service
center for a qualified inspection and
repair.
NOTE:
1. Care should be taken when using the
appliance due to the emission of steam.
2. Unplug the appliance Curing filling
and cleaning.
3. If the supply cord is damaged, it
must be repaired by it's service agent in
order to avoid a hazard.
Accessory Assemble
Fig. 1
The steamer comes with a Fabric Brush
for smoothing wrinkles from fabrics
delicately. Follow the following steps to
attach the accessories to the Steam
Nozzle.
1. Make sure the steamer is turned off
and no steam emits from the Steam
Nozzle.
2. T a k e t h e F a b r i c B r u s h a n d s l i d e i t
onto the Steam Nozzle, as shown in Fig.
1. 3. Make sure that holes on Steam
Nozzle are aligned with open slot on the
accessory, so that steam is not blocked.
Caution!
Do not install the accessory on
nozzle while steam emitting, to
avoid burns.
OPERATING INSTRUCTION
Filling Water Tank
1. Unplug the steamer before filling
the water.
2. Place the steamer on a flat and firm
surface.
3. Cautiously unscrew and remove
Water Tank Cap
4. Carefully fill Water Tank with water
from the provided measuring cup.
5. Fill up the Water Tank with cool
water to desired steaming level without
exceeding the MAX (0.25l) fill line as
indicated from the Water Tank window.
6. Replace Water T ank Cap.
Max 15 steaming for 15 minutes
10 steaming for 10 minutes
5 steaming for 5 minutes.
CAUTION:
1. Alter each use always allow unit to
cool down for 15 minutes before adding
cold water. Cold water added lo a hot
boiler may cause net water and steam
to shoot out of fill hole.
2. Extreme caution is needed when
pouring water into the water tank and
keep eyes distant from the fill hole.
3. Never fill water exceeding the MAX
filling.
NOTE:
1. Use of distilled or de-mineralized
water is recommenced to prolong the
life of the steamer.
2. Use water only. No detergent or other
chemical substance should be added to
avoid damage.
3. This kind of misuse will lead to invalid
warranty.
Steaming Linens & Fabrics
Make sure the Water Tank has been
already filled and that deseed accessory
is connected before the following steps.
1. Plug in the unit. Switch on the unit
by pressing the On/Off Switch. The
Switch will illuminate to indicate that
the unit is on.
2.
Steam will emit from the Steam
Nozzle in approximately 2 minutes.
3. Direct the Steam Nozzle with either
one of the accessories towards the
material you wish to steam.
4. Keep the flow of steam focused on
the material you are steaming. Using a
slight back-and-forth motion over the
area you are steaming will further
enhance the process.
Always be sure that Steam Nozzle and
the attachment are pointed in a safe
5
direction (away from the user, other
people, pets and plants) when steam is
being emitted.
OPERATING INSTRUCTION
Steaming Garments
1. Place garment on a clean, rust-free
hanger.
2. Direct steam nozzle towards bottom
of the garment. Steam will rise along
inside and outside of the fabric and
remove wrinkles. Slowly slide Steam
Nozzle upward from bottom lo top of the
garment (Fig. 3).
3. Direct Steam Nozzle away from the
garment and smooth fabric with your
free hand".
4. Repeat as necessary until garment
is wrinkle-free.
STORAGE
1. Unplug the power cord.
2. Allow the unit to cool completely (at
least 60 minutes)
3. Remove the attachment from the
unit.
4. Drain remaining water in water tank
thoroughly into a sink or tub to
minimize potential mineral build-up.
Loosely replace Water Tank Cap. Do not
tighten cap, it may lie difficult for the
next use.
5. Store all accessories with the unit in
a cool, dry location.
REMOVING MINERAL BUILD-UP
The best way to avoid mineral build-up
is to use distilled or de-mineralized
water. 1. Unplug the unit and allow it to
cool completely (at least 60 minutes).
2. Remove all accessories from the unit.
3. Remove Water Tank Cap and drain
water from the Water Tank into sink or
tub.
4. Using a measuring cup, make a
mixture of 0.125L vinegar and 0.125L
water.
5. Slowly pour water-vinegar solution
into the Water Tank.
6. Allow to stand for 1 -2 hours.
7. Drain the solution from the Water
T a n k .
8. If the mineral build-up still remain in
the unit. Repeat points 3-7 above until
the mineral build-up is removed.
9. Rinse the Water Tank with fresh
water, drain and repeat until vinegar
odor disappears.
10. Replace the Water Tank Cap.
1) The unit is designed for indoor
household use only.
2) Commercial users will not obtain the
regular warranty as stated in the terms
of the warranty card.
Problem Possible
Reasons
Solution
Unit fails
to heat
up.
Unit is
not plug
in.
Switch is
not
activated
.
Plug into
electrical
outlet.
Press the
On/Off
switch.
Unit heats
up, but
fails to
steam.
Water
tank is
empty or
water
level too
low.
Mineral
build-up
in unit.
Thermo-
fuse
breakdow
n.
Refill Water
T a n k
according to
the
Operating
instruction
of this
manual.
Follow
Removing
Mineral
Build-Up
procedure
of this
manual.
Bring to
Service
Centre.
Steam
output is
intermit-
tent.
Mineral
build-up
in unit.
It’s normal
for unit to
stop
periodically
steaming
for a few
seconds. If
steam stays
of for longer
periods,
follow
“Removing
Mineral
Build-Up”
procedure
of this
manual.
Specification
Power: 1000 W
Rated Voltage: 220-230 V
Rated Frequency: 50 Hz
Rated Current: 4.5 A

Produktspezifikationen

Marke: Saturn
Kategorie: Zu fordern
Modell: ST-CC7145

Brauchst du Hilfe?

Wenn Sie Hilfe mit Saturn ST-CC7145 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Zu fordern Saturn

Saturn

Saturn ST-CC0216 Bedienungsanleitung

1 März 2024
Saturn

Saturn ST-CC7107 Bedienungsanleitung

28 Januar 2024
Saturn

Saturn ST-CC7142 Bedienungsanleitung

14 September 2023
Saturn

Saturn ST-CC0210 Bedienungsanleitung

3 Juni 2023
Saturn

Saturn ST-CC7122 Bedienungsanleitung

10 Mai 2023
Saturn

Saturn ST-CC7132 Bedienungsanleitung

8 Mai 2023
Saturn

Saturn ST-CC7145 Bedienungsanleitung

26 Oktober 2022

Bedienungsanleitung Zu fordern

Neueste Bedienungsanleitung für -Kategorien-

Grundig

Grundig SI 8050 Bedienungsanleitung

27 Juni 2024
Superior

Superior KB-2288 Bedienungsanleitung

26 Juni 2024
Create

Create IRON UP STAND Bedienungsanleitung

25 Juni 2024
Calor

Calor Pure Pop DT2022 Bedienungsanleitung

18 Juni 2024
Calor

Calor Pro Express Ultimate GV9710 Bedienungsanleitung

18 Juni 2024
Calor

Calor Pro Express Ultimate GV9720 Bedienungsanleitung

18 Juni 2024
Calor

Calor JA1013 Bedienungsanleitung

18 Juni 2024
Gorenje

Gorenje SIH 2600GC Bedienungsanleitung

17 Juni 2024
Empisal

Empisal EIP003 Bedienungsanleitung

14 Juni 2024
Brentwood

Brentwood MPI-53 Bedienungsanleitung

13 Juni 2024