Sangean WFR-1D+ Bedienungsanleitung

Sangean Empfänger WFR-1D+

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sangean WFR-1D+ (2 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Quick Setup Guide
Connect the Sangean Internet Radio (WFR-1) either to wired or wireless LAN as shown below. This is the same
way your PC is connected to the internet.
* No PC is needed. PC needs to be turned on and connected to the router only when you would like to play music
loaded in your PC (Shared Folder or UPnP).
1. Turn on the router and the internet radio.
2. Connect the devices as the figure above.
3. Rotate and press the SELECT control (a knob) on
the radio to go to Main Menu -> System Setup ->
Internet Setup -> Wizard ->［ ］Wired
4. If there is password for the access point, input and
enter the password using the SELECT control.
Then radio will connect to the internet. Please read
the instruction manual for all the functions.
* If the wired connection is not working, after a few
seconds the display will change to show ‘Scan for
networks’
1. Turn on the router with access point and power plug
the internet radio.
2. Connect the devices as the figure above.
3. Press the SELECT control (a knob) on the radio, it
will scan for networks and show all the detectable
access points’ names.
4. Rotate and press the SELECT control to select your
access point. It can be your access point’s model name
or a set up name.
5. If there is password for the access point, input and
enter the password using the SELECT control. Then
radio will connect to the internet. Please read the
instruction manual for all the functions.
* After setting up as above, the internet radio is connected to internet and ready to be operated. Rotate and press the
turning knob on the internet radio to operate the functions.
PROBLEMS:
CALL TOLL FREE 1-888-SANGEAN (726-4326)
Troubleshooting
If you have difficulty connecting the radio to your wireless network, some of these steps may help to resolve the
problem:
Problem Cause Suggestion
The display shows
“Network Error” or it times
out after it shows “Network
Error for a long period of
time.
Network is not connected Check if the router/modem is powered on, and check if the wireless access
point you connected is correct.. For wired connection, check if the Ethernet
is plug in to the internet radio.
Can’t connect to the
networks
You have a static IP address You can configure a static IP address on the radio using the menu item
‘Main Menu -> System Setup -> Internet Setup -> Wireless or Wired(select
one you are using) ->, and then select DHCP disable’, to input your
IP ,DNS addresses.
Network bandwidth/speed is
insufficient
Internet radio consumes 32kbps to 256 kbps. Dial up connection doesn’t
work with internet radio. Cable, ADSL or fiber are all good.
Wireless router blocks the
internet radio MAC address
Check that your access point does not restrict connections to particular
MAC addresses. You can view the radio’s MAC address by checking the
direction of ‘Main Menu -> System Setup -> Internet Setup ->View
Settings'. Note that the this internet radio has both wired and wireless MAC
addresses.
When the unit is using
wireless, the display shows
“Please wait connecting ”
There is no wireless connection Check if:
1. The router/modem is on
2. The unit is too far from the wireless access point.
3. Check with laptop, if available, to make sure wireless is operating
correctly.
Internet radio can’t be
played
Radio station is not
broadcasting, or the station has
reached the maximum allowed
number of listeners.
Select another radio station.
Sound is on and off Network bandwidth/speed is
slow
It may happen when listening to high bit rate station, or the network
bandwidth is occupied.

Produktspezifikationen

Marke: Sangean
Kategorie: Empfänger
Modell: WFR-1D+

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sangean WFR-1D+ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Sangean

Sangean

Sangean WR-11BT+ Bedienungsanleitung

12 August 2024
Sangean

Sangean WFR-30 Bedienungsanleitung

9 August 2024
Sangean

Sangean WR-45 Bedienungsanleitung

5 August 2024
Sangean

Sangean SR-36 Bedienungsanleitung

3 August 2024
Sangean

Sangean U4 DBT+ Bedienungsanleitung

2 August 2024
Sangean

Sangean PR-D19 Bedienungsanleitung

2 August 2024
Sangean

Sangean DPR-42BT Bedienungsanleitung

25 Juli 2024
Sangean

Sangean PR-D12BT Bedienungsanleitung

23 Juli 2024
Sangean

Sangean PR-D3LCU Bedienungsanleitung

8 Juli 2024
Sangean

Sangean WFR-1D+ Bedienungsanleitung

7 Juli 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024