Samsung HM320II Bedienungsanleitung

Samsung Festplatte HM320II

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Samsung HM320II (2 Seiten) in der Kategorie Festplatte. Dieser Bedienungsanleitung war für 70 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

This marking shown on the product or its literature, indicates that

it should not be disposed with other household wastes at the end

of its working life. To prevent possible harm to the environment or

human health from uncontrolled waste disposal, please separate

this from other types of wastes and recycle it responsibly to

promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they can take

this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of

the purchase contract.

This product should not be mixed with other commercial wastes for disposal.

2.5" HDD INSTALLATION GUIDE

1MB = 1,000,000bytes / 1GB = 1,000,000,000 bytes.

Actual accessible capacity may vary from advertised capacity due to

formatting and partitioning of the hard drive, as well as due to your

computer's operating system.

Do not drop, shock or strike.

If apply impact to the HDD, it causes a Bad Sector by crashing between

Head and Media. Do not stack. Do not external shock and vibration.

Do not remove all items, such as Hard drive label, warranty label.

Warranty void if any stickers or labels are removed

or damaged. Never disassemble hard drives.

Do not touch the circuit board with hands or tools.

Protect the HDD from Electrostatic Discharge(ESD).

MR Head is very sensitive in Electrostatic.

Keep the HDD in their static shielding bag.

Avoid extreme temperatures and humidity places.

Humidity causes a drive malfunction by reacting

with an ingredient of oil in Disk and Head surface.

Also, parts can be corrode by leaving in humidity.

Samsung does NOT guarantee any data on your drive,

please always BACK-UP your precious data.

Precautions

HDD does not be recognized in BIOS setup.

First, confirm whether each cable was connected correctly.

Confirm whether Jumper-setting is correct.

Confirm whether BIOS setup became correctly.

Even though the HDD recognized in BIOS setup, it does not be

seen in Windows.

Confirm whether did correctly partition and format.

Partition can be created through the Fdisk or Installing OS

according to OS's version.

I am looking for a Software & Firmware (mainly about drivers) but I

found nothing.

Where I can find I want ?

We don't release any firmwares.

Because the product has been already optimized with its own

configurations.

IDE ( drive does not need any drivers. You just have PATA & SATA)

to make a partition and format your drive for using.

Please make sure whether you had partitioned and formatted.

First of all, you must partition and format for recognizing the new

drive in the Windows Explorer.

Within Win98 series, please use the Fdisk.

Within Win2000 & Win-XP, please use the Disk Management.

When installing Win2000 or Win-XP, the installation process

includes the partitioning step itself.

To open the Disk Management

Click Start, point to Settings, and then click Control Panel.

Double-click Administrative Tools, and then double-click

Computer Management.

In the left panel, expand Storage, and then expand Disk

Management.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

SAMSUNG ELECTRONICS CO., LTD.

STORAGE SYSTEM DIVISION

HEAD OFFICE: 94-1, IM SOO-DONG, GUMI-CITY KYUNG BUK, KOREA 730-350

FAX : 82-54-479-5567

" Hybrid Disk Drive products are licensed for use only on devices that deploy the

Windows VISTA operating system as the principle operating system. If you or any other

party install(s) an operating system on the computing device that is not Window Vista,

the use of this Hybrid Disk Drive may require an additional license from Microsoft.

For further information, please contact Microsoft. "

Samsung Electronics Co., Ltd. Printed in Korea. BF68-00237A REV02

When use an external case

Do not drop or fall while using and

being storage the external case.

An external case is easy to transfer, but can be shocked easily also.

Check the External case's Grounding

External case's Grounding prevents HDD malfunction form ESD

DO NOT PRESS!

DO NOT DROP!

If you have any comments or questions regarding a Samsung products.

Country Customer Care Center Web Site

Parts Toxic and hazardous substances or elements

Printed Circuit Assemblies

Head Disk Assemblies

O : Indicates that the concentration of the hazardous substance in all h

omogeneous materials in the parts is below the relevant threshold of the

SJ/T11363-2006 standard.

X : Indicates that the concentration of the hazardous substance of at least

one of all homogeneous materials in the parts is above the relevant

threshold of the SJ/T11363-2006 standard.

Pb Hg Cd Cr PBB PBDE

The Names and Content of Toxic and Hazardous Substances

or Elements

Contact SAMSUNG WORLD WIDE

CANADA

U.S.A

GERMANY

U.K

RUSSIA

UKRAINE

AUSTRALIA

1-800-SAMSUNG (7267864)

01805 - 121213 ( 0,14Min)

0870 SAMSUNG (7267864)

8-800-200-0400

8-800-502-0000

1300 362 603

www.samsung.com/ca

www.samsung.com

www.samsung.de

www.samsung.com/uk

www.samsung.ru

www.samsung.com/ur

www.samsung.com/au

(a) Turn off the power of your computer.

(b) Unplug the external power cables to the computer.

Cover opening mechanism and the location of the hard disk drive

may vary from one computer to another. (Consult your computer

manual)

(d) Insert the HDD into an available 3.5" bay in your computer and

secure it to computer and secure it to the chassis using the

provided screws.

(e) Connect Cables.

Attach the SATA interface cable to the interface connector on the hard

disk drive. The connector is keyed and will fit in only one way.

Attach the power cable to the power receptor on the hard disk drive.

The connector is keyed and will fit in only one way.

Check all other cable connections before turning on your computer.

CAUTION! : Do not force or rock the connectors into their

sockets on the hard disk drive. Push them in

straight until they are seated.

Run the CMOS (BIOS) set-up program to detect the new hard disk

drive.

Go into CMOS screen during the booting of the computer.

For descriptive details of the program, refer to the computer's user's

manual

1. Making Computer Detect the New Device

PATA Installation

Configuring your Hard Disk Drive (Master, Slave)

Polarity Jumpers

Master Slave Cable Select

SATA Interface

Connector

Power Connector Jumper Pins

(For Factory Use Only)

Installing the hard disk

SATA

Interface

Cable

Power Cable

Computer

Main Board

Serial SATA

Host Adapter

SATA Installation

Installing the hard disk

Do Not Connect

In Reverse !!

Note: - Turn off the system power !

- Cover opening mechanism and the location of the hard

disk drive may vary from one computer to another.

Turn off the computer, unplug the external cables, and open computer

cover. Mount the hard disk drive in the designated place in the

computer with screws provided with the product.

Connect 40 pin interface cable and power cable. Make sure that the

direction of the cables are correct and matches the shape of the

receptacles when connecting cables. Incorrect cable connection may

damage the hard disk drive.

Installation Your Hard Drive

Note: SATA 1.5Gb/s Speed Limit Jumper setting Only for

SATA 3.0Gb/s products. In some rare cases SATA 1.5Gb/s

hosts can not establish SATA interface connection with

SATA 3.0Gb/s devices due to interface protocol issues.

In this case the jumper may be installed as shown on the

figure below to force the device to negotiate for SATA

1.5Gb/s speed.

Make the computer detect the hard disk.

If your computer supports IDE HDD Auto Detection, the hard disk

drive will automatically be detected.

If your computer does not support auto detect, go into the User

Define Mode and by referring written information on the product,

set the correct settings for Cylinder, Head, and Sector and if some

Bios must be, set the HDD Mode to LBA.

Save the changed details and exit.

Refer to your Operating System manual or system manual for partitioning

and formatting.

Additional information can be obtained at www.samsunghdd.com.

When using within an USB external case, sometimes drive is not

recognized.

It may be caused by insufficiency of USB DC power.

By supplying a subsidy DC power, the symptom can be solved.

When using within an USB external case, drive can not be Format.

First, confirm whether a partition has been created correctly.

Format does not work if there is no partition.

2. Partitioning and Formatting the Drive

3. Samsung World Wide Web Site

FAQs

Produktspezifikationen

Marke:	Samsung
Kategorie:	Festplatte
Modell:	HM320II
Breite:	69.85 mm
Tiefe:	100 mm
Gewicht:	105 g
Produktfarbe:	Schwarz
Höhe:	9.5 mm
Betriebstemperatur:	5 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	8 - 90 %
Stromverbrauch (Standardbetrieb):	2.5 W
Typ:	HDD
Stromverbrauch (Standby):	0.25 W
Eingebaut:	Ja
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Energiebedarf:	+5V±5%
Schnittstelle:	Serial ATA II
Benutzerhandbuch:	Ja
Kompatible Betriebssysteme:	Windows 98/2000/XP
Arbeitsspannung:	5 V
HDD Kapazität:	320 GB
HDD Geschwindigkeit:	5400 RPM
HDD Größe:	2.5 "
Höhe bei Betrieb:	-300 - 3000 m
Puffergröße Speicherlaufwerk:	8 MB
Anlaufstrom:	1 A
Datenrate:	138, 300MB/s
Stoßfest (in Betrieb):	400 G
Stoßfest (außer Betrieb):	900 G
Höhe bei Lagerung:	-400 - 15000 m
Durchschnittliche Wartezeit:	5.6 ms
Schallldruckpegel:	2.6 dB
Vibrationen in Betrieb:	1.5 Grms G
Bytes pro Sektor:	512
Durchschnittliche Suchzeit:	12 ms
Drive Ready Time:	4 s