Sagemcom D750 Bedienungsanleitung

Sagemcom Telefon D750

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sagemcom D750 (2 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

D750-D750A

D750-D750A D750-D750A

D EAR CUSTOMER

You have just acquired a new generation Sagemcom telephone. Thank you for placing your

confidence in us.

This device has been manufactured with the utmost care.

If you should have difficulties in operating it, we recommend that you consult this manual or

contact the Sagemcom Support Team on 0

0845 0900 316

845 0900 316

845 0900 316845 0900 316*.

You can also find information on the following site:

www.sagemcomdigital.c

www.sagemcomdigital.cwww.sagemcomdigital.co.uk

o.uk

o.uk o.uk

For your comfort and safety, we ask that you read the following section carefully:

« R

Recommendations and sa

ecommendations and sa

ecommendations and saecommendations and safety instructions

fety instructions

fety instructions fety instructions ».

The CE marking certifies that the product meets the essential requirements of

Directive 1999/5/CE of the European Parliament and of the Council pertaining to

microwave radio equipment and telecommunication terminal equipment, for the

safety and health of users, for electromagnetic interference.

Furthermore, it efficiently uses the frequency spectrum attributed to ground and

spatial communication to prevent damaging interference.

The declaration of compliance may be looked up on the w

www.sagemcom.com

ww.sagemcom.com

ww.sagemcom.comww.sagemcom.com

site "Support" section or can be obtained from the following address :

Sagemcom Broadband

Sagemcom BroadbandSagemcom Broadband SAS

SAS

SAS SAS

250, route de l'Empereur

92848 Rueil-Malmaison Cedex - France

*: 3.95 pence per minute from all fixed lines, tariff cost effective from 01/09/2009

D750-D750A

D750-D750A D750-D750A

B EFORE YOU BEGIN

Make sure your package includes the following:

this user guide

a base unit

a handset one battery compartment

cover

a telephone line cord an AC power supply two rechargeable

batteries

D750

D750A

If you have purchased the Duo / Trio version you will find below additional accessories per

handset:

a handset charger two rechargeable

batteries

one battery

compartment cover

The base

D750 D750A

1.1. Handset port

Handset port

Handset port Handset port

2.2. Display

Display

Display Display

(refer to paragraph «H

How

ow ow the

the

the the base

base

base base

display works

display worksdisplay works», page 15).

D750-D750A

D750-D750A D750-D750A

Handset keys

* The voice mail number can be programmed. To

change it refer to paragraph «

Changing

Changing Changing your

your

your your

voice mail number

voice mail number voice mail number », page 13.

** Only the "top" and "bottom" keys of the

navigator function. The "left" and "right" keys have

no effect on any action.

1 1 Screen

2 2

OK / Menu key:

- Validation

- Access the menu / options

3 3 Green key: Accept call / Make call

4 4 Access to voice messaging service (Press and

hold) *

5 5 Star key: Mute/Unmute ring tone (Press and

hold)

6 6 Activate / deactivate handsfree mode

7 7 Microphone

8 8 Earpiece

9 9

Key C / MUTE / intercom:

- Return to previous menu

- Correct the entry / cancel the action

- Activate/ Deactivate the microphone

(during a call)

- Call another handset (from the home

screen)

10 10 Navigator ** : Up / Down

11 11

Red key :

- Finish call

- Switch handset on/off (press and hold)

12 12 # Key : Activate / Deactivate keypad lock

(Press and hold)

13 13 R key : Manage multiple calls

14 14 Access phonebook

Navigator

- From the Home screen:

Access to the caller list

- On the menu:

Navigation key up - From the Home screen:

Access to outgoing call list (Bis)

- On the menu:

Navigation key down

No action

D750-D750A

D750-D750A D750-D750A

Rear view

Rechargeable

batteries

attery

compartment cover

Paging button

- short press: find handset.

- long press (>4 sec): handset pairing mode

(active for 1 minute)

Handset (rear view)

Base

(rear view)

Power socket

Telephone socket

Installing the phone

1. Plug the phone cable into the socket of your D750

base.

2. Connect the other end of the cable with the phone

wall socket.

3. Connect the power adapter cord to the underside

of the base.

4. Connect the power adapter plug to the wall socket.

5. Insert the batteries according to their polarities.

6. Close the battery compartment.

«searching...» appears on the screen.

a. A welcome message in all the languages

supported by the telephone is displayed on

the screen, press

b. Select the country using  or  keys,

press

c. A screen asks you to confirm your choice.

Press

You will hear a confirmation tone.

The standby screen is displayed.

7. Place the handset in the base station to charge for

15 hours

15 hours15 hours prior to first use.

15 H

IMPORTANT

IMPORTANT IMPORTANT

If your handset batteries are empty leave the handset in the charging unit for at

least 10 minutes. You will then be able to switch it on again.

* depending on version

D750-D750A

D750-D750A D750-D750A

Handset display

Status icons

Information field

Action icons

Status icons

Flashes when the handset is out of

range or when the base is

disconnected from power.

Hands-free activated

External call

Charging status icon

Fixed : batteries are full

Blinks : charging in progress

: Batteries are low.

Internal call

Keypad locked

New voice messages

Alarm set

Silent mode activated.

On: answering machine activated.

Blinks : new message(s) on your

answering machine.

Information field









Telephone number

longer than screen

display area

(11 digits).

88..

In standby:

the name of the handset or the time + the number of the

handset (see section "C

Choose the home screen

hoose the home screen

hoose the home screenhoose the home screen", page 13)

During a call:

- the caller's number

- the duration of the call

In the menu:

- the name of the menu /

of the function

D750-D750A

D750-D750A D750-D750A

Action icons

By pressing the key you

access a menu or a list of options C

While entering a n

While entering a nWhile entering a number:

umber:

umber:umber: Pressing the key

will delete the last letter / character.

During a call

During a callDuring a call: By pressing the key

you activate

/ deactivate the handset microphone.

Pressing the key confirms

an action.

By pressing the key you return to the

previous menu

Missed call not consulted.

By pressing the key you can make

an internal call (see section "I

Intercom

ntercom

ntercom ntercom

Call

CallCall", page 11).

M ENU STRUCTURE

Quick reference

call list Hs settings Alarm

Options Add to pb Ring setup

Delete Tone setup

Delete all language

details Rename hs

Hs display

phonebook Auto answer

Options add Date & time

View Mailbox

edit

delete registration

Delete all

Pb status Default

Ans. Machine* Msg playback

Delete all

Bs settings Delete hs Memo

Dial mode Tam on/off

Flash time Tam settings

Change pin

Call share

* D750A

D750-D750A

D750-D750A D750-D750A

How to navigate among the menus

To navigate among the menus, use the keys : , , . ( )and ()

Only the "up" and "down" keys of the navigator function. The "left" and "right"

keys have no effect on any action. Refer to paragraph «Navigator», page 3.

Step 1: accessing a menu

- Press ( ).

Step 2: selecting a menu / a sub-menu

- Select "the desired menu" use the keys ()or ().

- Confirm by pressing the key (O

KK).

Step 3: selecting a function

- Select "the desired function" use the keys ()or ().

- Confirm by pressing the key (OK).

- Modify the parameter.

- Confirm by pressing the key (OK).

Example:

Example: Example: how to use the menu to change your handset ring tone.

Go to the menu Hs settings Æ ring setup .

Step 1: accessing a menu

1. Press ( ).

Step 2: selecting a menu

2. Select " hs settings " using the ( )or () key.

3. Press (O

KK).

4. Select " ring setup " using the or  key.

5. Press

KK).

6. Select "int. ring " (or "ext ring ") using the or .

7. Press (O

KK).

Step 3: selecting a function

8. 10 melodys are available: " melody 1 " " melody 10 ".

Select the desired melody using the  or key.

9. Press (O

KK) key to confirm your selection.

D750-D750A

D750-D750A D750-D750A

C ALL MANAGEMENT

Make a call

Ensure that the handset is switched on.

Hands-free mode:

1. Press . The icons and appear and you will hear the dial tone.

2. Enter the phone number.

- OR -

1. Enter the phone number.

2. Press . The icons and appears.

Normal mode:

1. Press . The icon is displayed.

2. Enter the phone number.

- OR -

1. Enter the phone number.

2. Press .

During a phone call you can activate or deactivate the handset loudspeaker by

pressing the key .

Answering a call

When the phone rings, press the key to answer the call.

You can adjust the volume of your handset earpiece by pressing  or  key

anytime during a conversation.

Ending a call

To end a call press .

Microphone mute function

-Enable MUTE function: press , " Muted " is displayed on the screen.

-Disable MUTE function: press , your conversation partner will be able to hear you again.

Checking your voice mailbox

If you have received a new voice mail message, the icon is displayed on the screen.

To use this feature you need to set up a voice mailbox (please refer to section

"Changing your voicemail number" on page 13)

1. Hold down the key (key 1).

2. Follow the instructions.

3. Once you have consulted the messages, the icon disappears.

Inserting a pause (in dialling)

You can insert a pause in dialling a phone number if you want to wait before actually ringing.

While dialling the number you want to call, press and hold the key

to insert the pause.

The display shows a P.

D750-D750A

D750-D750A D750-D750A

C ALL LOG

Calling Line Identification Presentation (CLIP)

This CLIP phone stores and displays CLIP information provided by your local telephone company.

If you have not subscribed to CLIP service or if the caller number is suppressed, the display

shows unknown.

Display of numbers not available:

Display of numbers not available:Display of numbers not available:

-OU

OUOUT

T T OF

OFOF A

A AR

RREA

EAEA: you are not in same area as your contact.

-WI

WIWITH

THTHHE

HEHELD

LDLD: your contact does not want their number to be displayed.

Received/Missed call log

The list contains the numbers of the last 10 calls received.

1. Press () .

2. The most recent name or call number is displayed (depending on whether or not your

contact is stored in your phonebook).

3. Press the or  key to go through the list. Press .

4. Select " details ". Press .

5. The date and time when the selected call was received are displayed.

6. Press the or  key to go through the list.

If icon  is displayed the number of this caller exceeds 11 digits and cannot be

displayed onscreen. Press to view the complete number.

Consulting a missed call

When call(s) have been missed, the message " X new calls " is displayed on the screen

(X is the number of missed calls).

1. Press .

2. The most recent name or call number is displayed (depending on whether or not your

contact is stored in your phonebook).

3. Press the or  key to go through the list. Press .

Missed calls are indicated by the icon in the incoming call log.

Dialled call log

The dialled call log presents the calls you made (max. 5 last calls).

To consult the list:

1. Press briefly () .

2. The last dialled number is displayed. Press the 





or 



 key to consult the list of the last 5

numbers dialled.

Calling back a number in your call list

1. Press the ()

() key.

2. Press the or  key to go through the list.

3. Press .

Making an entry in the phonebook from the list of calls

1. Press the ( )

or ( ) key.

2. Use  or  to select the desired caller number.

D750-D750A

D750-D750A D750-D750A

3. Press key, then select " add to PB ".

4. Enter the name of the entry. Press .

5. Press

to validate the number.

6. Choose a ring tone for the contact you create. Press .

Deleting caller list record

1. Press the ( )

or ( ) key.

2. Press or  key to select a call record.

3. Press .

4. Select "delete " (or " delete all" to delete the entire Caller list).

5. Press to confirm.

P HONEBOOK

You can store 50 phonebook entries (20 digits and 12 characters) in your phonebook

Calling a contact from your phonebook

1. Press key to access to the contact list.

2. Press or  to go through the list.

3. Once the contact to call is chosen, press .

Adding a contact to the phonebook

1. Go to the menu "phonebook" Æ Æ "Add ".

2. Enter the name of the entry. Press .

3. Enter the number. Press .

4. Choose a ring tone for the file you create. Press .

Display a contact

1. Go to the menu "phonebook".

2. Choose the contact to display with the or . Press .

3. Select "view".

4. The number is displayed. Use keys  or to display the name of the ring tone assigned to

that file.

If icon  is displayed the number of this caller exceeds 11 digits and cannot be

displayed onscreen.

Use the keys or to display all the digits.

Editing a contact

1. Go to the menu "phonebook".

2. Select the entry you want to edit using  or . Press .

3. Select "edit".

4. You can now use the key to delete the entire name or individual characters.

5. Enter the new name and press

key.

6. You can now use the key to delete the entire number or individual digits

7. Enter the new number and press

key.

8. Choose a ring tone for the file you create. Press .

Deleting a contact / the entire phonebook

1. Go to the menu "phonebook".

2. Select the entry you want to delete using  or . Press .

D750-D750A

D750-D750A D750-D750A

3. Select "delete" (or "delete all " to delete the entire phonebook list).

4. To confirm the deletion of the entry, Press

Directory capacity

Your directory has a capacity of 50 contacts.

When the memory is full, the message "pb full" is displayed and you cannot add any new

contacts.

U - SING THE MULTI HANDSET CAPABILITIES

These functions are used for handset management when two or more handsets are registered on

the same base.

Intercom Call

1. Make sure your handset is on standby mode.

2. Press the key.

- If your installation has two handsets, the second handset is directly called, and "calling hs

X" appears on the screen (x is the number of the handset called) and " " flashes.

- If your telephone installation has more than two handsets, the icon "H

HHS

S S " appears on the

screen followed by the numbers of all registered handsets.

3. Enter the desired handset number or press the key if you want to call all handsets.

Answering an internal call

1. " call fr hs " followed by the calling handset number is displayed on the screen and " "

flashes.

2. Press to accept the call.

Managing an external and an internal call

Transfering an external call to another handset registered on same base

1. During a call, press .

2. Select "intercom ", press . The incoming call is put on hold.

3. Enter the internal call number. When the user answers, you can announce the call.

4. Press key to transfer the call.

If the called handset does not answer, press to take back the call.

Making conference calls (3-way conversation)

You can connect one external call to two handsets registered at the base station. To set up a

telephone conference from an external call :

1. During a call, press .

2. Select "intercom", press . The external user is put on hold.

3. Enter the internal call number. Wait until the internal user answers.

4. Press and hold until you hear a confirmation tone to start a three-way conference.

"conference" is displayed on the handset screen.

Join in a conversation already taking place

If the share call mode is activated, you can join in a conversation from another handset registered

with the same base (refer to paragraphe « Authorise / prohibit call sharing », page 15).

From another handset (registered on the same base), press the green key . You will then

join in the conversation.

D750-D750A

D750-D750A D750-D750A

Two outside calls

Accepting a second call whilst being in another call

During a call, a beep is emitted by your operator to inform you that a second call is on hold. A

screen displays the number of this second caller on hold.

Press then the key to take back this new call.

Your first contact is put on hold and you can talk with the second caller.

Making a second call whilst being in another call

During a conversation, press then dial the number to be called.

The call in process is then put on hold and you can take the second call back.

Switching from one call to the other

To switch from one call to the other, press then the key .

The call in process is then put on hold and you can take the second call back.

Ending one of the two calls

To end one call and continue with the other, press then the key .

The call in process is then ended finally and you take the second call back.

To set up a 3-way conference (the 2 calls and yourself)

During a conversation, press then the key .

You can then talk with the 2 contacts at the same time.

To end the 3-way conference, press the red key .

C USTOMISING THE HANDSET

Select the ring tone (internal / external)

1. Go to the menu "hs settings " Æ "ring setup " Æ "ext. ring" (or "int. ring").

2. Select the ring tone of your choice using or . Press .

Handset ringer level

1. Go to the menu "hs settings " Æ "ring setup " Æ "ring volume".

2. Use  or  to select the volume level then press to confirm your selection.

Activating/deactivating the warning beeps

1. Go to the menu " hs settings " " Æ "tone setup " Æ " key tone or " battery tone " or

" out of range ".

2. Change the status using the keys o .

3. Press .

Modifying the language

1. Go to the menu " hs settings " Æ " language ".

2. Use  or to choose the desired language.

Press key to confirm your selection.

Handset naming

The default name of the handset is " handset N " where N

is the number of the registered handsets

1. Go to the menu " hs settings " Æ " rename hs ".

2. Use the keypad to enter the new name (up to 10 characters).

3. Use key to delete wrong input if necessary. Press .

D750-D750A

D750-D750A D750-D750A

Modify the remote enquiry code

With the enquiry code you can make remote access to your answer machine messages secure

from another telephone.

To secure the remote access to your answering machine, it is strongly

recommended to change the remote access code.

1. Go to the menu "ANS. MACHINE " "Ætam settings" Æ "change pin".

2. Enter the remote enquiry code (0000 by default) using the keys on the keypad.

Press .

3. Enter the new remote enquiry code, press .

4. Enter the new remote enquiry code a second time, press to confirm deletion.

A confirmation beep is issued.

Message compression

With this function, you can choose the compression level of messages recorded by your answer

machine.

- A low compression level will reduce the answer machine capacity but will give better sound

quality to recorded messages.

- A high compression level will increase the answer machine capacity but will give a poorer

sound quality to recorded messages.

1. Go to the menu "ANS. MACHINE " "Ætam settings" Æ "compression".

2. Choose the desired compression level (high, Medium or Low) using keys   or .

3. Press key to confirm your selection. You will hear a confirmation tone.

Answer machine memory capacity

Compression

Compression Compression Capacity

Capacity

Capacity Capacity Recording quality

Recording quality

Recording quality Recording quality

High 15 min Standard quality

Medium 10 min Medium quality

Low 5 min High quality

For more details, see section "M

Message compressi

essage compressi

essage compressiessage compression

onon", page 19.

When your answering machine reaches its maximum recording capacity, the

answering machine switches to Answer only mode automatically.

When your answer machine reaches its maximum recording capacity, you cannot receive any

new messages. The handset displays " tam full" and is displayed on the base.

D750-D750A

D750-D750A D750-D750A

Choose the home screen

The default home screen is the name of your handset.

1. Go to the menu " hs settings " Æ "hs display ".

-" handset name " : to display the name of the handset and its number on the home screen.

-" time " : to display the time and the number of the handset on the home screen.

2. Choose the desired display using keys   or . Press .

Answer calls automatically

This function allows you to take a call by simply taking the handset off its base.

1. Go to the menu " hs settings " Æ "auto answer ".

2. Change the status using the keys or .

3. Press .

Changing your voice mail number

1. Go to the menu " hs settings " Æ " mailbox ".

2. Use the key to delete the number entered.

3. Enter the voice mail number, press .

Key lock

1. Hold down the key until the handset beeps and the icon is displayed.

2. To unlock the keypad, hold down the key until the handset beeps and the icon

disappears.

S ETTING THE DATE AND TIME

Setting the time

1. Go to the menu " hs settings " Æ Æ "Date & time " " set time ".

2. Current date is displayed.

- To keep the time, press .

- To change it, enter the new time in the HH : MM (24 hours format).

3. Press .

Setting the date

1. Go to the menu " hs settings " Æ Æ "Date & time " " set date ".

2. A screen displays the current date.

- To keep the date, press .

- To change it, enter the new date in DD/MM/YY or MM/DD/YY format.

3. Press .

If you make a mistake while entering data, use keys  or .

Hour format (12H/24H)

1. Go to the menu " hs settings " Æ Æ "Date & time " " time format ".

2. Change the status using the keys or .

3. Press .

Date format

1. Go to the menu " hs settings " Æ Æ "Date & time " " date format ".

2. Change the status using the keys or . Press .

D750-D750A

D750-D750A D750-D750A

Setting the alarm

1. Go to the menu " hs settings " " Æ alarm ".

To deactivate the alarm, select "OFF ".

To activate the alarm once, select "ON ".

2. Press

3. Enter the time at which you would like the alarm clock to sound: "HH – mm ".

4. Press . « Snooze » (repetition) is displayed on the screen. Press .

"ON " : to activate alarm repetition every 5 minutes.

"OFF " : to deactivate alarm repetition.

The icon is displayed on the screen. Your alarm is now set.

ADVANCED SETTINGS

Association of other handsets with your base

1. Press and hold the pairing button on the base for 5 seconds (If no handset has been

detected within a minute the pairing mode will stop and your base return to standby).

2. Go to the menu "registration ".

3. Enter the 4 digit base master PIN code (default 0000). Press .

4. The screen will display the number of the handset that has been paired with the base.

Restoring the handset / hase Default Settings

1. Go to the menu " default ".

2. Enter the base master PIN code (default 0000). Press .

3. A screen displays a request to confirm.

4. Press

Deleting a handset

1. Go to the menu " Bs settings " Æ " delete hs ".

2. Enter the base master PIN code (default 0000). Press .

3. Select the handset you want to delete using the  or  key then press

key.

Modifying the dialing mode

Most telephone systems use the tone dialling mode.

You can, however, use the pulse dialling mode:

1. Go to the menu " Bs settings " Æ " Dial mode ".

2. Change the status using the keys or .

3. Press .

Flash timing

If you connect your telephone to a private automatic branch exchange or use it in a foreign

country, you may need to modify the flash duration in order to use your telephone correctly with

regard to the following functionalities: outgoing 2nd call, incoming 2nd call, conference call.

Contact your administrator, who will supply the appropriate time period, and proceed to the new

settings.

1. Go to the menu " Bs settings " Æ " Flash time ".

2. Select the appropriate time period, press .

D750-D750A

D750-D750A D750-D750A

Modifying Base master PIN code

Your base station code (default setting 0000) is required to access certain security functions.

This must contain 4 digits.

1. Go to the menu " Bs settings " Æ " change pin ".

2. Enter your old code first, press .

3. Enter your new PIN code.

Each time a digit is entered the «--»is replaced by a «*». Press .

4. Enter the new base code again, using the keypad. Press .

5. Press key to confirm. You will hear a confirmation tone.

Carefully note your base station code. You will need it to change certain settings.

Authorise / prohibit call sharing

With this function another handset registered with the same base can join in a conversation (refer

to paragraph « Join in a conversation already taking place », page 11).

1. Go to the menu " Bs settings " Æ " call share ".

2. Change the status using the keys or .

3. Press key to confirm.

ANSWERING MACHINE (M ) ODEL D750A ONLY

The answering machine function of your telephone has two operating modes:

- B

Basic

asic

asic asic answering

answering

answering answering machine

machine

machinemachine: a message indicates that you are not available. Your caller cannot

leave any messages.

- R

Recording

ecording

ecording ecording ans

ans

ansanswering

wering

wering wering machine

machine

machinemachine: a message tells your correspondents that they can leave you

a message.

How the base display works

Display

DisplayDisplay Description

Description

Description Description

There are new messages: the display flashes indicating the number of

unread messages

(blinks)

Answer machine activated

(fixed)

Answer machine deactivated

Access to the answer machine menu from the handset or by remote

enquiry

Playing your personalised answer machine message

Playing the basic answer machine message outgoing message

Message being recorded: ( ) display alternates with the number of new

messages ( ).

Memory full: ( ) display alternates with the number of new messages

( ).

D750 - D750A

USE

D750-D750A

D750-D750A D750-D750A

Enabling / disabling the answering machine

1. Go to the menu " ANS. MACHINE " Æ "tam ON/OFF".

2. Select "on" or "off" using  or  to activate your answering machine.

Press .

Each time you power on your base, the answering machine goes to its previous

state.

Playing messages

If you have received new messages, the number of received messages flashes on the display on

the base and the icon flashes on the handset.

1. Go to the menu " ANS. MACHINE " Æ " msg playback ".

2. Press to play the messages. New messages are read first.

3. Press to access the various message options. The list of options is displayed on the

screen:

-STOP: stop reading the messages.

-forward: play the following message.

-Previous: return to previous message.

-Delete: delete the current message.

4. Press the key to quit the menu.

5. If there are no messages, the handset indicates " 00--00 00--00".

While playing you ca

hile playing you ca

hile playing you cahile playing you can use the handset keys:

n use the handset keys:

n use the handset keys:n use the handset keys:

Key

KeyKey Action

Action

ActionAction Key

Key

KeyKey Action

Action

ActionAction

delete the current message

stop reading the messages

- 1 press: return to beginning

of the message.

- 2 presses: return to previous

message.

play the following message

Delete all old messages

1. Go to the menu " ANS. MACHINE " ". Æ" delete all

2. Press , the massage "confirm? " is displayed.

3. Press to confirm the deletion of all old messages.

Record a memo

With this function you can leave a personal message on your answer machine. Until it has been

listened to, it will be considered as a new message by the answer machine.

1. Go to the menu " ANS. MACHINE " Æ "memo".

2. Press to record the memo. the message "recording" is displayed. You can now record

your memo.

3. Press to stop the recording of the memo.

4. The massage " playing " is displayed and the memo you have just recorded is played.

Listening to a message while it is being recorded

While a caller is recording a message, " screening ? " is displayed on your handset screen.

Press the key to listen to the message.

D750-D750A

D750-D750A D750-D750A

ANSWERING MACHINE SETUP (M ) ODELS D750A ONLY

Modify the answering machine mode

1. Go to the menu "ANS. MACHINE" "Æ "tam settings" Æ ANSWER MODE".

2. Select "ANSW & REC" or "Answer only" using the or key to activate or deactivate your

answering machine, press . A confirmation beep is issued.

Modify the answering machine language

You can choose the language of your answering machine. The messages will be played back in

the language you select.

1. Go to the menu "ANS. MACHINE"Æ "tam settings" Æ "tam language".

2. In the list, choose the desired language using the  or key, press .

Modifying the outgoing message (OGM)

Recording a personal outgoing message

1. Go to the menu "ANS. MACHINE" " " "Ætam settings" ÆOgm settings" ÆANSW & REC" (or "ANSWER ONLY").

2. Select "RECORD OGM" using the or key, press .

3. Record your message.

4. At the end of your message, press .

A beep will confirm that your message is now being used.

If you make a mistake while recording the message, repeat the operations described above until

you are satisfied with your message.

The recording of a new message will automatically replace the previous

message

The maximum recording duration for an message is 1

120 seconds

20 seconds

20 seconds20 seconds.

The recording start and end beeps are not part of your message

Listening to your answer machine message

1. Go to the menu "ANS. MACHINE" " " " " Ætam settings" ÆOgm settings" ÆANSW & REC" (or "ANSWER ONLY").

2. Select "playback" using the or key, press .

3. Your current answer machine message will be played. Your handset will automatically return

to the previous menu.

If you have not saved a personal message, the answering machine will

automatically use one of the pre-recorded messages.

Number of rings

This parameter enables you to set the number of times your telephone rings before the answering

machine answers a call. The number of rings can be set between 2 and 8.

You can also select the "time saver" mode. The " time saver " mode automatically determines the

number of rings: If there are no new messages on the answering machine, the number of rings

will be 4, otherwise the number of rings will be 2.

1. Go to the menu "ANS. MACHINE " "Ætam settings" Æ "answer delay ".

2. In the list, select the desired number of rings (between 2 and 8) using the  or keyor the

" time saver " mode, press .

D750-D750A

D750-D750A D750-D750A

Recording time of incoming messages

Define the maximum time a caller has to leave their message.

1. Go to the menu "ANS. MACHINE " "Ætam settings" Æ "record time ".

2. Choose the desired recording time (60s , 120s, 180s or unlimited) by using keys  or ,

then press .

Remote access control

This function allows you to check your voice messages and change your answer machine

settings even when you are not at home.

Activate/deactivate remote access

1. Go to the menu "ANS. MACHINE " "Ætam settings" Æ "remote acc.".

2. Use or to select " on " or " off " setting.

3. Press key to confirm your selection. You will hear a confirmation tone.

Remote access control

To remotely access your answering machine: Dial your telephone number and wait for the

answering machine to come on. When your outgoing message is played, press # and enter your

remote access code (0000 by default).

If no key is pressed for 5 seconds, the answer machine will stop automatically.

This default remote access code is 0000, and it can be modified from the ANS.

MACHINE Ætam settingsÆchange pin" menu (refer to the paragraph M

Modify the

odify the

odify the odify the

remote enquiry code

remote enquiry coderemote enquiry code page 19)

A beep will indicate access to the answering machine. You can carry out the following operations:

Key

Key Key Action

Action

Action Action Key

Key

Key Key Action

Action

Action Action

44 - 1 press: return to beginning

of the message.

- 2 presses: return to previous

message.

22 Delete the current message

55 Start playback of the

messages

99 Switch OFF the answering machine

66 7

77 go to the next message Activate the answer machine.

88 Stop playing the messages

D750-D750A

D750-D750A D750-D750A

R ECOMMENDATIONS AND SAFETY INSTRUCTIONS

Your DECT telephone must not be installed in a humid room (wash-up room,

bathroom, laundry room, kitchen, etc.) unless it is 1.50 m away from a water point or

outside. Your telephone must be operated at temperatures ranging from 5°C and

45°C.

Only use the supplied power adapter, connect it to the base socket according to the

installation instructions provided in this booklet and the indications on the

identification label affixed to it (voltage, current, electric network frequency). As a

precaution, in case of danger, the mains adapters act as a disconnecting mechanism

for the 230V power supply. They should be placed near the device and should be

easily accessible.

This product is intended to be connected to the public analogical telephone network

of any British and Irish network operator. In case of a problem you must first contact

your reseller. Only use the supplied telephone cord.

For your personal safety, never place your handset on the base without the batteries,

or without the battery cover, you could get an electric shock.

To avoid damaging your handset, only use certified rechargeable AAA batteries NiMH

1.2 V 400 mAH, never use non rechargeable batteries. Insert the batteries in the

handset battery compartment respecting polarity.

At the end of their useful life, batteries must be disposed of according to the recycling

instructions presented in this booklet.

Your DECT telephone has an inside radio range of about 50 metres and up to 300

metres in open space. The immediate presence of metal parts, (of a television for

example), of any electric appliance may result in range reduction.

Some sensitive medical equipment and safety equipment may be affected by the

radio-frequency transmissions of your telephone. In all cases, we ask that you respect

the safety recommendations.

In areas where storms are frequent, we recommend that you protect your telephone

line using a surge protection device.

This

his

his his equipment

equipment

equipment equipment does

does

does does not

not

not not function

function

function function in

inin

the

the the case

case

case case of

of of an

an an electric

electric

electric electric network

network

network network shutdown:

shutdown:

shutdown: shutdown: for

for

for for

emergency calls, it

emergency calls, itemergency calls, it is recommended to use another unit during power cuts

is recommended to use another unit during power cuts

is recommended to use another unit during power cuts is recommended to use another unit during power cuts.

B ATTERIES SAFETY PRECAUTIONS

To avoid any risk of explosion:

To avoid any risk of explosion: To avoid any risk of explosion:

Make sure you have inserted the batteries correctly.

Use only with 1,2V 400mAh type or equivalent rechargeable batteries.

Do not dispose of the batteries in a fire. The cell may explode.

Check with local code for possible special disposal instructions.

Do not burn, disassemble, mutilate or puncture. Like other batteries of this type, toxic materials could

be released which can cause injury.

To reduce the risk of fire or personal injury, use only the battery listed in the users guide.

Keep batteries out of the reach of children.

Remove batteries if storing over 30 days.

D750-D750A

D750-D750A D750-D750A

G ENERAL PRODUCT CARE

To keep your telephone working and looking good, follow these guidelines:

Avoid putting the phone near heating appliances and devices that generate electrical noise (for

example, motors or fluorescent lamps)

DO NOT expose to direct sunlight or moisture.

Avoid dropping and other rough treatment to the phone.

Clean with a soft cloth.

Never use a strong cleaning agent or abrasive powder because this will damage the finish.

Retain the original packaging in case you need to ship the phone at a later date.

Changing the batteries

Make sure the telephone is O

OFF

FFFF before you replace batteries.

1. Remove the batteries compartment door.

2. Remove old batteries.

3. Insert the new batteries.

4. Put the batteries compartment door back on.

5. Place handset in the base to charge

T ROUBLESHOOTING

Causes of poor reception:

Aluminium siding.

Foil backing on insulation.

Heating ducts and other metal construction can shield radio signals.

You are too close to appliances such as microwaves, stoves, computers, etc.

Atmospheric conditions, such as strong storms.

Base installed in the basement or lower floor of the house.

Handset batteries are low.

You are out of range of the base.

Troubleshooting

Troubleshooting Troubleshooting

Problem

Problem Problem Solution

Solution

Solution Solution

No display

xMake sure the batteries are properly installed and connected.

xPlace the handset on the charger and fully charge the battery (at least 15 hours).

Handset does

not ring

xMake sure the RINGER setting on the handset is programmed to ON.

xYou may have added too many handsets to your phone line. Try disconnecting

some of your phones and try again.

Not possible

to make a call

despite dial

tone

xCheck that your handset is within range and move close to the base unit

(approximately 50 meters indoors and up to 300 meters in open space).

xCheck if the base unit is plugged into a wall socket that is shared with other

household appliances. Unplug other device and try again.

D750-D750A

D750-D750A D750-D750A

E NVIRONMENT

Environmental protection and sustainable development is an important priority for Sagemcom.

Sagemcom has a policy of using environmentally- friendly systems and makes environmental protection

an essential part of the life-cycle of its products  from manufacturing, to installation, operation and

disposal.

Packaging

The presence of the logo (green dot) means that a contribution is paid to an approved

national organisation to improve packaging recovery and recycling infrastructures.

To facilitate recycling, please respect the sorting rules set up locally for this kind of

waste.

Batteries

If your product contains batteries, they must be disposed of at appropriate collection points.

The product

The crossed-out waste bin stuck on the product or its accessories means that the

product belongs to the family of electrical and electronic equipments.

In this respect, the European regulations ask you to dispose of it selectively:

xAt sales points in the event of the purchase of similar equipment.

xAt the collection points made available to you locally (drop-off centre, selective

collection, etc.).

In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment

Waste, which can have an effect on the environment and human health.

T C U K & I ERMS AND ONDITIONS FOR NITED INGDOM RELAND ONLY

In order to apply the guarantee, or for technical assistance, you should contact the Sagemcom

Helpdesk (0

0845

845

845 845 0900

0900

0900 0900 316

316

316316) or the retailer you purchased your equipment from. Please make sure that

you use your equipment only for the purpose for which it was designed and under normal usage

conditions. Sagemcom do not accept any liability for the equipment if used outside the frame of its

original designed purpose or any consequence that may arise from this usage.

Should any malfunction arise, the Sagemcom Helpdesk or your retailer will advise you how to proceed.

A) General Guarantee conditions

A) General Guarantee conditions A) General Guarantee conditions

Sagemcom undertakes to remedy by repair or exchange at its own convenience, free of charge for

labour and replacement parts, any defects in the equipment during the guarantee period of 12 (twelve)

months or 3 (three) months for accessories, from the date of original invoice of the Equipment, where

those defects are a result of faulty workmanship.

Unless the customer has concluded with Sagemcom a maintenance contract in respect of the

equipment which specifically provides for repairs to be carried out at the customer's premises, the

repairs will not be carried out on the equipment at the customer premises.

The customer must however return the defective equipment at his/her own expense, to the address

supplied by the Sagemcom Helpdesk or by the retailer. In the case that a product needs to be sent in

for a repair, it must always be accompanied by a proof of purchase (which is not altered, written on or in

any way made illegible) showing that the product is still under guarantee.

In the case that no proof of purchase is enclosed, the Sagemcom repair centre will use the production

date as its reference for establishing the guarantee status of the product. Apart from all legal obligatory

rules, Sagemcom, do not give any Guarantee, either implicit or explicit which is not set force in the

present section, and can not be held responsible for any direct or indirect, material or immaterial

damage, either in or out of the frame of the present guarantee.

If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an

obligatory rule applicable to consumers pursuant to their national legislation, such invalidity or illegality

shall not impair or affect the remaining provisions or parts of this guarantee. This guarantee does not

affect the Customer statutory rights.

D750-D750A

D750-D750A D750-D750A

B) Exclusions From Guarantee

B) Exclusions From Guarantee B) Exclusions From Guarantee

Sagemcom shall have no liability under the guarantee in respect of:

xDamage, defects, breakdown or malfunction due to one or more of the following:

- Failure to properly follow the installation process and instructions for use;

- An external cause to the equipment (including but not limited to: lightening, fire, shock,

vandalism, inappropriate conditions of electrical network or water damage of any nature)

- Modifications made without the written approval of Sagemcom

- Unsuitable operating conditions, particularly of temperature and humidity

- Repair or maintenance of the equipment by persons not authorised by Sagemcom.

xWear and tear from normal daily use of the equipment and its accessories

xDamage due to insufficient or bad packaging of equipment when returned to Sagemcom

xUsage of new versions of software without the previous approval of Sagemcom

xWork on any equipment or software modified or added without the prior written consent of

Sagemcom

xMalfunctions not resulting from the Equipment or from software installed in user workstations for

the purpose of use of the equipment. Communication problems related to an unsuitable

environment including:

- Problems related to access and/or connection to the Internet such as interruptions by access

networks or malfunction of the line used by the subscriber or his correspondent

- Transmission faults (for example poor geographical coverage by radio and TV transmitters,

interference or poor line quality)

- Local network faults (wiring, servers, workstations) or the failure of the transmission network

(such as but not limited to interferences, fault or poor quality of the network

- Modification of the parameters of the cellular or broadcast network carried out after the sale

of the Product.

xNormal servicing (as defined in the user guide supplied with the equipment) as well as

malfunctioning due to servicing not being carried out. Servicing costs are in any event always

borne by the customer - Malfunctions resulting from the usage of products, consumables or

accessories not compatible with the equipment.

C) Out of Guarantee Repairs

C) Out of Guarantee Repairs C) Out of Guarantee Repairs

In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the

Authorised SAGEMCOM Repair Centre for a cost estimation prior to work being carried out.

In such cases, the repair and delivery costs will be invoiced to the customer.

The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United

Kingdom and Ireland.

wwww.sagemcomdigital.co.uk

ww.sagemcomdigital.co.uk

ww.sagemcomdigital.co.uk ww.sagemcomdigital.co.uk

253536070A

Produktspezifikationen

Marke:	Sagemcom
Kategorie:	Telefon
Modell:	D750

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sagemcom D750 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Telefon Sagemcom

Sagemcom D780A Bedienungsanleitung

22 August 2024

Sagemcom D750 Bedienungsanleitung

22 August 2024

Sagemcom D790A Bedienungsanleitung

22 August 2024

Sagemcom D77T Bedienungsanleitung

22 August 2024

Sagemcom C100 Bedienungsanleitung

22 August 2024

Sagemcom D380 Bedienungsanleitung

16 Mai 2024

Sagemcom D380A Bedienungsanleitung

28 Dezember 2023

Sagemcom D790 Bedienungsanleitung

19 Dezember 2023

Sagemcom D530P Bedienungsanleitung

10 Dezember 2023

Sagemcom D530 Bedienungsanleitung

15 Juni 2023

Bedienungsanleitung Telefon

Neueste Bedienungsanleitung für -Kategorien-

Gigaset SL370 Bedienungsanleitung

15 Oktober 2024

Profoon PDX-7020 Bedienungsanleitung

15 Oktober 2024

Profoon PDX-100 Bedienungsanleitung

14 Oktober 2024

Uniden XS 1415 Bedienungsanleitung

13 Oktober 2024

Uniden XDECT 6105BTU Bedienungsanleitung

11 Oktober 2024

OnePlus 9RT 5G Bedienungsanleitung

9 Oktober 2024

Profoon PDX-1520 Bedienungsanleitung

7 Oktober 2024

MT Logic TE-5740MTWG Bedienungsanleitung

7 Oktober 2024

D-Link DI-102 Bedienungsanleitung

6 Oktober 2024

Belgacom Specifics 100 Bedienungsanleitung

5 Oktober 2024