Sagemcom C100 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sagemcom C100 (57 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/57
1
English
Introduction
Dear customer:
Thank you for purchasing a SAGEMCOM telephone we appreciate your trust in us.
For your comfort and safety, we ask that you read the following paragraph carefully:
Recommendations and safety instructions
Your telephone must not be installed in a humid room (wash-up room, bathroom, laundry
room, kitchen, etc.) unless it is 1.50 m away from a water point or outside. Your telephone
must be operated at temperatures ranging from 5°C and 35°C.
Do not attempt to remove screws or open the appliance. It does not contain any user-
replaceable parts.
The CE marking certifies that the product meets the essential requirements of Directive
1999/5/CE of the European Parliament and of the Council pertaining to microwave radio
equipment and telecommunication terminal equipment.
The declaration of compliance may be looked up on the www.sagemcom.com site or
can be obtained from the following address:
SAGEMCOM SAS
250, route de l'Empereur - 92500 Rueil-Malmaison - France
Parts checklist
Your package should contain the following items:
- Base unit,
- Handset,
- Handset cord,
- Phone line cord.
Installation and setup
1. Adjust the RINGER volume switch to the desired setting (Default setting is HI).
2. Set the PULSE/TONE switch to TONE if you use Touch-Tone Service; set it to PULSE if you
have rotary service. Default setting is TONE.
3. Set the Flash time switch (600ms, 300ms, 100ms) to the appropriate setting (Default setting is
300ms).
If the product is to be used in Spain, Hungary, Poland, UK, Czech Republic, Slovakia,
Romania, the Flash time switch should be set to 100ms.
If the product is to be used in Germany, France, Greece, Portugal, Turkey, the Flash
time switch should be set to 300ms.
T O N E P U L S E
L I NE
L O W MID H I1 00 3 0 0 60 0
F L AS H R ING E R
2
English
4. Plug the handset cord into the handset (1), and into the telephone jack on the left side of the
unit (2).
5. Plug the telephone line cord into a modular jack (RJ11) (3) and into the LINE jack on the back
of the unit (4).
6. Place the handset to base cradle.
Using features
Making a call
1. Lift the handset and wait for a dial tone.
2. Dial the telephone number using the keypad.
Receiving a call
Lift the handset to answer the call.
Ringer volume control
Use the RINGER volume switch on the bottom of the base to adjust the volume of the ringer.
Flash button
Press the FLASH button instead of using the hook switch to activate customer calling services
such as call waiting or call transfer, which are provided by your local phone company.
Redial button
Redial the last number you called by pressing the REDIAL button after you get a dial tone. Max
digit of redial is 32.
Care and Maintenance
Use a slightly damp cloth to wipe the base and handset, do not use a dry cloth as this may cause
electrostatic charges.
Environment
Preservation of the environment is an essential concern of SAGEMCOM. The desire of
SAGEMCOM is to operate systems observing the environment and consequently it has decided
to integrate environmental performances in the life cycle of its products, from manufacturing to
commissioning, use and elimination.
Packaging
The presence of the logo (green dot) means that a contribution is paid to an approved
national organisation to improve packaging recovery and recycling infrastructures.
To facilitate recycling, please respect the sorting rules set up locally for this kind of
waste.
3
42
1


Produktspezifikationen

Marke: Sagemcom
Kategorie: Telefon
Modell: C100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sagemcom C100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Telefon Sagemcom

Bedienungsanleitung Telefon

Neueste Bedienungsanleitung für -Kategorien-