Sagem XG760A Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sagem XG760A (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
1
SAGEM Wi-Fi 11g USB ADAPTER
Quick Start Guide
About this guide
This Quick Start Guide describes how to install and operate your SAGEM Wi-Fi 11g USB
ADAPTER.
Please read this manual before you install the product.
Introduction
The SAGEM Wi-Fi 11g USB ADAPTER is a network adapter with a rate of 54 to 1 Mbps operating
in the 2.4 GHz band implementing the IEEE 802.11g standard.
Its USB port is USB 2.0 compliant
It fully supports wireless networking under Windows 98SE/ME/2000/XP.
The Wireless LAN (Local Area Network) USB adapter can be operated in one of the two following
networking configurations :
1. Infrastructure Networking
In this mode, the radio links are coordinated by
an Access Point enabling to access an existing
wired network and/or enabling to access to
network resources such as Internet, email, file
transfer…
2. Ad-hoc Networking Also known as a peer to peer network, this mode
allows wireless to wireless connection, enabling
all workstations to act as servers to all others.
This mode can be used to share a printer or for
file transfer.
Infrastructure
Ad-hoc
Wired Network
Wireless Network
Access
Point
Package Content
2
These are the items included in the package:
One SAGEM Wi-Fi 11g USB ADAPTER
One USB Cable
One Quick Start Guide
One installation CD-ROM
Minimum System Requirements
PC or MAC Computer with an available USB port (the available USB ports on the MAC
keyboard are not usable because they do not supply enough current).
Compatible with USB 1.1 port
Microsoft Windows 98 Second Edition (98SE), Windows Millennium (ME), Windows 2000
or Windows XP installed on the PC or Mac OS X.2 or higher installed on the MAC.
Installation of the Wireless LAN Software
The installation of your LAN USB adapter requires three steps:
Installation of the software
Installation of the hardware
Configuration of the wireless connection
I. Installation of your LAN USB adapter under Windows :
I.1 Installation of the software
Warning: It is necessary to install the Wireless LAN Software BEFORE to insert
the USB adapter in the appropriate USB port of your computer.
The first step consists in copying on your hard disk all the necessary files for your new
equipment. For that, please follow the next instructions:
1. Insert the Product CD-ROM into the CD-ROM drive of your computer.
3
2. An Auto-run is automatically executed and
the following screen comes up. If not, run the
Autorun.exe” on the CD-ROM
Select in the list your adapter model.
Please, read the model information directly
on your equipment.
The menu offers the following choices :
Install the Wireless LAN Utility and driver
Read the present manual
To launch the installation, click Wi-Fi
adapter install”
A first screen shows up. Click to continue. Follow the on-screen instructions to installContinue”
the Wireless LAN Utility.
When this screen shows up, go to the next
chapter to execute the hardware installation
of your SAGEM Wi-Fi 11g USB ADAPTER,
then click on OK”.
I.2 Hardware installation of the SAGEM Wi-Fi 11g USB ADAPTER
After having copied all necessary files in the previous step, we will now connect the Wireless
LAN.
Insert the USB connector of the adapter in an USB port on your computer or use the USB
cable included in your package, if it is impossible to connect the USB adapter directly on your
computer.


Produktspezifikationen

Marke: Sagem
Kategorie: Nicht kategorisiert
Modell: XG760A

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sagem XG760A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Sagem

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-