Sagab By Elma 945 - Digital clamp meter Bedienungsanleitung

Sagab By Elma 945 - Digital clamp meter

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Sagab By Elma 945 - Digital clamp meter (10 Seiten) in der Kategorie . Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Sagab by Elma
945
23
English User manual
Digital clamp meter
elma 945
Sagab by Elma
945
24
Measuring limits
x DC A 0,01A to 1000A
x AC A 0,01A to 1000A
x DC V 0,1mV to 600V
x AC V 0,1mV to 600V
x Resistance 0,1Ωto 40MΩ
x Capacitance 0,001nF to 40mF
x Frequency 1Hz to 4kHz
x Temperature -40°C to 1000°C
Safety information
This manual contains information that must be followed for operating the meter safely and
maintaining the meter in a safe operation condition. If the meter is not used in a manner
specified in this manual, the protection provided by the meter may be impaired.
The meter has been designed and complies with IEC 61010-1 and EN61010-1 Safety
requirements for electronic measuring apparatus.
Warning
Read through the operating instructions and understand the instructions before operating
the meter.
Keep the manual at hand so as to enable quick reference when necessary.
Ensure that the use of the meter is in its intended applications and follow measurement
procedures described in this manual.
Follow all safety and operating instructions to ensure maximum personal safety during the
use and operation of the meter.
Failure to follow the above instructions may cause injury, instrument damage and damage
to equipment under test.
The symbol indicated on the meter means that the user must refer to related parts in the
manual for safe operation of the meter. Be sure to carefully read the instructions following
each symbol in this manual.
DANGER is reserved for conditions and actions that are likely to cause serious or fatal
injury.
WARNING is reserved for conditions and actions that are likely to cause serious or fatal
injury.
CAUTION is reserved for condition and actions that are likely to cause minor injury or
damage.
Sagab by Elma
945
25
DANGER
x Never use the meter to measure voltages on a circuit above the maximum
allowable input value on any function
x Do not exceed the maximum allowable input of any measurement range.
x Never touch exposed wiring, connections or any live circuit when attempting to take
measurements.
x Do not attempt to make measurement in areas with flammable gasses, fumes,
vapor or dusk. The use of the instrument in these areas may cause sparking which
can lead to an explosion.
x Do not attempt to use the instrument if its surface or your hand is wet.
x Never open the battery compartment cover when making measurements.
WARNING
x Always inspect he meter and test leads for any signs of damage or abnormality
before use. If the meter or its accessories have any structural defects such as
broken test leads, cracked cases, exposed metal parts or the display is not reading,
do not attempt to make measurements.
x Do not turn the function switch whilst test leads are connected to the meter.
x Do not install substitute parts or make modification to the meter. Return the meter to
your distributor for repair or re-calibration.
x Ensure the meter is switch off before opening the battery cover when replacing the
battery.
x Never replace a battery if the surface of the meter is wet or moist.
CAUTION
x Before making measurements ensure that the function selector switch is set on the
appropriate range position.
x Always make sure that the plug of each test lead is inserted fully into the
appropriate terminal of the meter
x Ensure that the function selector switch is set to the OFF position after use. When
the meter is stored for extended periods the battery should be removed.
x Do not expose the meter to direct sunlight, extreme temperatures or moist.
x Do not use abrasives or solvents on the meter. To clean it use a damp cloth and
mild detergent only,
x Qualified and trained service technicians should only perform calibration and repair
of the meter.


Produktspezifikationen

Marke: Sagab By Elma
Kategorie:
Modell: 945 - Digital clamp meter

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sagab By Elma 945 - Digital clamp meter benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Sagab By Elma

Bedienungsanleitung

Neueste Bedienungsanleitung für -Kategorien-