Russell Hobbs Carving Knife 13892 Bedienungsanleitung
Russell Hobbs
Wir
Carving Knife 13892
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Russell Hobbs Carving Knife 13892 (8 Seiten) in der Kategorie Wir. Dieser Bedienungsanleitung war fĂŒr 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
instructions
Read the instructions and keep them safe. If you pass the appliance on, pass on the
instructions too. Remove all packaging, but keep it till you know the appliance works.
important safeguards
Follow basic safety precautions, including:
1 This appliance must only be used by a responsible adult.
2 Donât put the handle in liquid, donât use it in a bathroom, near water,
3 Donât use the knife in the presence of children. Their movements are
unpredictable, they may jog your arm or bump into you inadvertently.
4 Unplug the knife from the power socket before attaching or removing
blades and before cleaning.
5 After use, clean the blades, replace them in their protective sleeve, and store them
out of the reach of children.
6 The blades are extremely sharp, donât leave them lying around where they may be
touched accidentally by you or anyone else.
7 Donât try to cut bone or frozen food. The blades may slip and cause serious injury. It
may also damage the blades.
8 Donât use the other hand to steady the food being cut. Use a carving fork.
9 Route the cable so that it canât catch on anything or get in the way of the blades
while in use.
10 Donât apply pressure to the knife and donât use a sawing action. Simply guide it
through the food, letting the motor do all the work.
11 When you ïŹnish, unplug the knife ïŹrst, then remove the blades.
12 Donât leave the knife unattended, especially where children may reach it.
13 Donât use the same set of blades on raw and cooked meat without washing them
thoroughly between uses.
14 Use a cutting board to avoid damage to the blades and to the work surface.
15 Donât use the knife for any purpose other than cutting food.
16 Donât let the cable touch hot surfaces.
17 Donât run the knife continuously for more than 5 minutes, to avoid overheating.
18 Donât use the knife after it malfunctions or has been damaged in any way.
19 If the cable is damaged, return the knife, in order to avoid hazard.
household use only
2
3
preparation
1 Clear a space on your worktop or table so that the knife canât hit anything and the
cable canât catch on anything while youâre using it.
2 Put the cutting board on the worktop and have the carving fork within easy reach.
3 Remove all packaging from the food. Donât use the knife to cut the packaging, you
may damage the blades.
4 Position the food on the cutting board.
ïŹtting the blades
5 Keep the protective sleeve on the blades.
6 Hold the blades by the ïŹnger grips.
7 Insert the free ends of the blades into the slots on the front of the body
and push gently till they click into place.
8 Lay the knife down on or near the cutting board.
9 Remove the protective sleeve from the blades.
10 Plug the knife into the power socket. If necessary,
switch the socket on.
11 Steady the joint with the carving fork.
cutting
12 Hold the knife as shown here.
13 Press the operating switch to set the blades
in motion. The switch is spring-loaded, the
knife will operate only while you hold the
switch down.
14 Cut away from your body.
15 Use a carving fork to steady the joint being cut â donât use your other hand.
16 Donât try to reposition the joint without putting the knife down ïŹrst.
17 If the joint needs repositioning, release the switch, set the knife down, move the
joint, steady it with the carving fork â then pick the knife up again.
18 When you ïŹnish, or if you need to stop cutting to do anything else, release the
switch, set the knife down, and unplug it.
19 Donât use the knife for more than 15 minutes in any one session.
removing the blades
20 Release the switch, set the knife down, and unplug it.
21 Keep your hand away from the operating switch.
22 Press the blade release button.
23 Hold the blades by the ïŹnger grips and
gently pull them out of their slots.
23 Keep your ïŹngers away from the edges of the blades.
cleaning the blades
25 One of the blades has a âkeyholeâ slot, the other has a rivet. To separate the blades,
slide the rivet along the slot to the large hole.
26 Wash the blades in hot soapy water, rinse, dry
thoroughly, then rejoin them and replace them in
their protective sleeve.
Produktspezifikationen
| Marke: | Russell Hobbs |
| Kategorie: | Wir |
| Modell: | Carving Knife 13892 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Russell Hobbs Carving Knife 13892 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wir Russell Hobbs
Bedienungsanleitung Wir
- Wir Crivit
- Wir Clatronic
- Wir G3 Ferrari
- Wir Ernesto
- Wir Tristar
- Wir Hama
- Wir Sunbeam
- Wir Bestron
- Wir Gastroback
- Wir Steba
- Wir Tefal
- Wir IKEA
- Wir Black And Decker
- Wir Ryobi
- Wir Cuisinart
- Wir Fritel
- Wir Graef
- Wir Kenwood
- Wir Krups
- Wir Moulinex
- Wir Waring Commercial
- Wir Exquisit
- Wir Bartscher
- Wir BeamZ
- Wir Continental Edison
- Wir Livoo
- Wir Hazet
- Wir Kalorik
- Wir Team
- Wir Toolcraft
- Wir Wolf
- Wir Victorinox
- Wir HQ Power
- Wir Swan
- Wir Hamilton Beach
- Wir Oster
- Wir Girmi
- Wir Nutrichef
- Wir Underwater Kinetics
Neueste Bedienungsanleitung fĂŒr -Kategorien-
3 Oktober 2024
30 September 2024
29 September 2024
24 September 2024
12 September 2024
7 September 2024
7 September 2024
7 September 2024
5 September 2024
4 September 2024