Rupert Neve Designs Satellite 5059 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Rupert Neve Designs Satellite 5059 (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
1
5059
Satellite 16x2+2 Summing Mixer
Oper
Oper
Oper
OperOpera
a
a
aations M
tions M
tions M
tions Mtions Manual
anual
anual
anualanual
2
5059: 16x2+2 Summing Mixer User Guide
Thank you for your purchase of a 5059 Satellite Summing Mixer.
Everyone at Rupert Neve Designs hope you enjoy using this tool as much as we have enjoyed
designing and building it. Please take note of the following list of safety concerns and power
requirements before using the 5059 module.
Safety
It’s usual to provide a list of “do’s and dont’s” under this heading but mostly these amount to
common sense issues. However, here are important safety requirements that must be adhered to:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (includ-
ing ampliers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t
into your outlet, consult an electrician.
10) Protect the power cord from being walked on or pinched, particularly at plugs convenience recep-
tacles and at the point where the cord exits from the apparatus.
11) Only use attachments/accessories specied by the manufacturer.
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been
damaged in any way, such as when power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not op-
erate normally, or has been dropped.
14) Do not expose this apparatus to rain or moisture.
15) The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Heat generated by the module is radiated through the case work, convection through the ventilation
holes, and by a silent fan at the back of the module. Ventilation holes should not be covered or blocked
for any reason. To avoid overheating, 5059 units should not be stacked immediately above or adjacent to
other equipment that get hot, and one rack space above the unit should be left open for heat ventilation.
Also bear in mind that other equipment may radiate strong hum elds which could spoil the perfor-
mance of your 5059.
Protect the power cord from being walked on or pinched, particularly at plugs convenience receptacles
and the point where they exit from the apparatus. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. Unplug the module during lightning storms or when unused for long periods of time.
3
Don’t operate your 5059 module in or around water! Electronic equipment and liquids are not
good friends. If any liquid is spilled, such as soda, coffee, alcoholic or other drink, the sugars and
acids will have a very detrimental effect. Sugar crystals act like little rectiers and can produce
noise (crackles, etc.). SWITCH OFF IMMEDIATELY because once current starts to î›…ow the
mixture hardens, can get very hot (burnt toffee!) and cause permanent and costly damage. If it gets
wet and you suspect that good clean water may have gotten in, immediately unplug the unit, and
remove it from the source of water. Please contact service as soon as possible at
service@rupertneve.com for resolution. Clean only with a dry cloth.
Don’t be tempted to operate a 5059 unit with the cover removed. The cover provides magnetic
screening from hum and R.F. stray elds, and also helps to direct heat away from the circuit boards.
5059 Block Diagram
TLA POST-FADE
C WCW
B USS1 LT MIX B USS1 LT OP S
B USS1 SILKB USS 1 RT MIX B USS1 R T OPS
B USS2 LT MIX B USS2 LT OP S
B USS2 SILKB USS2 R T MIX B USS2 R T OPS
INSER T
GND
+IN
-IN
+SND
-S ND
+NSRT
-INSRT
-
-
-
-
-
B USS1 LVL
B USS2 LVL
BUS S 1 LT O UT
BUS S 1 RT OUT
BUS S 2 LT O UT
BUS S 2 RT OUT
-2.5dB +10dB
CHANNEL 1 OF 16
BUS S 1 LT
BUS S 1 RT
BUS S 2 LT
BUS S 2 RT


Produktspezifikationen

Marke: Rupert Neve Designs
Kategorie: Nicht kategorisiert
Modell: Satellite 5059

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rupert Neve Designs Satellite 5059 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Rupert Neve Designs

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-