Rotel RDV-1050 Bedienungsanleitung

Rotel DVD-Player RDV-1050

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rotel RDV-1050 (38 Seiten) in der Kategorie DVD-Player. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/38
Owner’s Manual
RDV-1050
DVD Player
RDV-1050 DVD Player
Important Safety Instructions
WARNING: There are no user serviceable parts inside. Refer all servicing to qualified
service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to
moisture or water. Do not allow foreign objects to get into the enclosure. If the
unit is exposed to moisture, or a foreign object gets into the enclosure, immedi-
ately disconnect the power cord from the wall. Take the unit to a qualified ser-
vice person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component. Keep this manual so
you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the product itself. Fol-
low all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner. Do not use benzene, thinner or
other organic solvents and disinfectants. These may cause deformation or discoloring.
You must allow a minimum of 10 cm (46 inches) of unobstructed clearance around the unit.
Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation
slots. If the component is placed in a bookcase or cabinet, there must be ventilation of the
cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or any other appliance that
produces heat.
The unit must be connected to a power supply only of the type and voltage specified on the
rear panel of the unit.
Connect the component to the power outlet only with the supplied power supply cable or an
exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding
and/or polarization provisions. Do not use extension cords.
The main plug of the power cordset is a disconnect device of the apparatus. In order to com-
pletely disconnect the apparatus from the supply mains, the main plug of the power cordset
should be unplugged from the mains outlet. The stand-by LED indicator will not be lit up to
show the power cord is unplugged.
Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed
to heat, or damaged in any way. Pay particular attention to the power cord at the plug and
where it exits the back of the unit.
The power cord should be unplugged from the wall outlet if the unit is to be left unused for a
long period of time.
Immediately stop using the component and have it inspected and/or serviced by a qualified
service agency if:
• The power supply cord or plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way
Place the unit on a fixed, level surface strong enough to support its
weight. Do not place it on a moveable cart that could tip over.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment gene rates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to cor-
rect the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct
exposure to beam.
3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player;
leave all servicing to qualified service personnel.
WARNING!
To reduce the risk of electrical shock, fires, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose the unit to rain or moisture.
3. Do not touch the power cord or plug with wet hands.
2
3RDV-1050 DVD Player
1
36
2
3
4
5
TV / DVD switch
PAL/NTSC button
OPEN/CLOSE button
REPEAT button
Numeric buttons
SUBTITLE button
ANGLE button
PAGE button
TITLE / GROUP button
/ PREVIOUS button
(STOP) / CLEAR button
/ SLOW – button
TOP MENU button
VOLUME – / CURSOR button
CHANNEL – / CURSOR button
CHOICE button
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Infrared signal output window
DVD POWER button
TV POWER button
RETURN button
DIMMER button
VSS button
+10 / MUTING button
TV/VIDEO / CANCEL button
AUDIO / fs/RATE button
ZOOM button
VFP / PROG SCAN button
/ NEXT button
(PAUSE) button
(PLAY)/ SELECT button
/ SLOW + button
MENU button
CHANNEL + / CURSOR button
VOLUME + / CURSOR button
ON SCREEN button
ENTER button
6
7
8
9
10
11
12
13
14
15
Figure 1: RR-DV96 Remote Control
1
TV/DVD switch
Switches the RDV-1050 between TV control mode
and the DVD player control mode.
2
OPEN/CLOSE button
Opens and closes the disc tray.
3
Repeat button
Switches the RDV-1050 among “no repeat” mode,
“repeat 1” mode and to “repeat all” mode.
4
Numeric buttons
In DVD/CD mode use these to select a title or track
number, to enter a time for the Time search. In TV
mode they are used to select a TV channel.
5
SUBTITLE button
Used to activate the on-screen subtitle selection dis-
play and to turn the subtitle on or off (for DVD VIDEO).
6
ANGLE button
Changes camera angles during playback of a DVD
VIDEO disc containing multiple camera angles.
7
PAGE button
Lets you select from the available still pictures when
playing an DVD AUDIO disc.
8
TITLE/GROUP button
Used to select a Title when playing a DVD VIDEO
disc, and to select a Group when playing a DVD
AUDIO disc.
9
/PREVIOUS button
Skips back a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/
Video CD). Holding down this button during play-
back rapidly scans to earlier scenes.
10
■ (STOP)/CLEAR button
Stops playback. Also used to erase all the programmed
tracks for the program play.
11
/SLOW – button
During playback lets you reverse disc play at 1.5 to
60 times normal speed. When disc play is paused
press to reverse disc play at 1/2 to 1/32 normal
speed.
12
TOP MENU button
Press to display a menu to select specific scenes on
a disc.
13
VOLUME –/CURSOR Button
When in TV mode press to reduce volume. When in
DVD mode press to select an item from a menu or
on-screen display, or to change the setting of an item
in the on-screen display.
14
CHANNEL –/CURSOR Button
When in TV mode press to go to a lower channel.
When in DVD mode press to select an item from a
menu or on-screen display, or to change the setting
of an item in the on-screen display.
15
CHOICE button
Displays the DVD set-up menu. Is also used when
selecting parental lock settings
16
Infrared signal output window
Point this toward the remote sensor on the front panel
when pressing buttons.
17
DVD POWER button
18
TV POWER button
Press to turn the RDV-1050 or your TV on or off
(standby).
19
RETURN button
Returns to the previous menu (for SVCD/Video CD).
20
DIMMER button
Adjusts the brightness or turns off the display.
21
VSS button
Turn on/off the simulated Virtual Surround Sound
system.
22
+10/MUTING button
Used when selecting or programming numbered tracks
or scenes above 10. Also used to mute the TV sound.
23
TV/VIDEO/CANCEL button
Used to switch inputs when controlling the TV. Used
to remove selected items when setting up programmed
track play. Also used when setting up the RR-DV96
to control the TV.
24
AUDIO/fs/RATE button
Press and release to select various audio options during
disc play. Press and hold for a few seconds to select
the sampling frequency and bit length.
25
ZOOM button
When viewing video discs allows the image on the
screen to be enlarged from 1.8 to 64 times normal
size.
26
VFP/PROG SCAN button
Press and release to select the VFP function which
sets video play properties. Press and hold for a few
seconds to select progressive or interlace scan out-
put. (With U.S. version the Video Signal Selector switch
must be set to Remote to use this function. See
the Audio/Video Connections section.)
27
/NEXT button
Skips forward a chapter, title or track. Holding down
this button during playback advances playback rap-
idly.
28
II (PAUSE) button
Pauses playback.
29
(PLAY)/SELECT button
Starts playback. SELECT function is not used.
30
/SLOW button
During playback lets you advance disc play at 1.5
to 60 times normal speed. When disc play is paused
press to advance disc play at 1/2 to 1/32 normal
speed.
31
MENU button
Displays various menus that let you select items
from the disc.
32
CHANNEL +/CURSOR Button
When in TV mode press to go to a higher channel.
When in DVD mode press to select an item from a
menu or on-screen display, or to change the setting
of an item in the on-screen display.
33
VOLUME +/CURSOR Button
When in TV mode press to increase volume. When
in DVD mode press to select an item from a menu or
on-screen display, or to change the setting of an item
in the on-screen display.
34
ON SCREEN Button
Displays various menus on the screen that let you select
control and programing functions.
35
ENTER button
Press to accept various selections such as channels
selected with the numeric buttons or in some program-
ming steps.
36
PAL/NTSC button
European Version Only. Select a PAL or NTSC out-
put signal when the Video Signal Selector switch
is set to REMOTE.

Produktspezifikationen

Marke: Rotel
Kategorie: DVD-Player
Modell: RDV-1050

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rotel RDV-1050 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung DVD-Player Rotel

Rotel

Rotel RDV-1045 Bedienungsanleitung

3 August 2024
Rotel

Rotel RDV-995 Bedienungsanleitung

26 Juli 2024
Rotel

Rotel RDV-1080 Bedienungsanleitung

23 Juli 2024
Rotel

Rotel RDV-1050 Bedienungsanleitung

21 Juli 2024

Bedienungsanleitung DVD-Player

Neueste Bedienungsanleitung für -Kategorien-

Logik

Logik L9DUALM12 Bedienungsanleitung

14 Oktober 2024
Laser

Laser DVD-PT-10D Bedienungsanleitung

14 Oktober 2024
Qmedia

Qmedia QTK-212-NS Bedienungsanleitung

13 Oktober 2024
Kenwood

Kenwood DVF-3500-S Bedienungsanleitung

13 Oktober 2024
Trevi

Trevi PDX 1409 Bedienungsanleitung

8 Oktober 2024
Salora

Salora DVP1600 Bedienungsanleitung

8 Oktober 2024
Panasonic

Panasonic DVD-S38 Bedienungsanleitung

4 Oktober 2024
Kenwood

Kenwood DVF-5500-S Bedienungsanleitung

4 Oktober 2024
Alpine

Alpine DVE-5300 Bedienungsanleitung

2 Oktober 2024
Asus

Asus SBW-S1 Bedienungsanleitung

1 Oktober 2024