Rolls MP213 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Rolls MP213 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Connection guide
Rolls Corporation
Salt Lake City, UT
7/23
What's in the box?
1 - Made in USA MP213
1 - 15V power supply PN PS27s
1 - This owners manual
MP213 Dual-Mic Preamp
- Home
- Studio
- Broadcast
... Anywhere you need a clean preamplier for your favorite
dynamic or condenser microphones
The MP213 is designed to provide simple, in-
expensive microphone pre amplication for a
variety of applications. The unit has both XLR
and 1/8” inputs. XLR and 1/8” outputs, with a
single Gain control with a Clip LED indicator
for each channel. Phantom power is included
for use with a condenser microphone. The
1/8” stereo output is specially designed for
use as camera microphone mixer or a moni-
toring output.
SPECIFICATIONS
Connectors: Inputs: XLR, 1/8” (3.5mm) TRS balanced Mic In
Outputs: XLR balanced, 1/8” Stereo
Input Impedance: 10K Ohms bal, unbal.
Max Input Level: +4 dBV XLR bal, +10 dBV unbal.
Max Gain: 60 dB/XLR, 54 dB 1/4”
Phase Shift: <10 deg. 20 Hz - 20 kHz
EIN: -108 dB max.
THD: <.01%
IMD (SMPTE) <.01%
CMRR: > 80dB
Phantom Power: +48 Volts, 6 mA
Power: 15 VDC adapter
Weight: 1 lbs (.45Kg)
Size: 6.75” x 4.2” x1.4”
The MP213 uses a servo balanced instrumen-
tation amplier for studio grade performance
in a small package. This equates to a 40 db
better common mode rejection ratio (CMRR)
than transistor inputs used by most compa-
nies on mic inputs. It also means much lower
distortion.
FEATURES
- XLR and 1/8” Mic Inputs
- XLR Outputs
- Dual channel summed mono XLR output
- Gain Controls
- Clip LED indicators
- 1/8” Output for stereo microphone record-
ing or monitoring
- +48 Volt Phantom Power
Power switch
and LED for
indicating
power is ap-
plied to the
MP213.
DC jack for connec-
tion to the included
Rolls PS27s power
supply
OUTPUT: XLR jack
for signal output.
INPUT: 1/8” (3.5mm)
GAIN: Controls
the amount of
signal increase to
the MP213.
CLIP: LED for
indicating circuit
clipping. Indicates
distortion is pos-
sible.
PHANTOM POWER:
When pressed in, applies
+48 volts of phantom pow-
ering to both Ch 1 and Ch
2 XLR inputs.
BALANCED BALANCED
INPUT OUTPUT PWR
GAIN
6 dB 50 clip
48V
PHANTOM
POWER power
Dual-Mic Preamp MP213
15
VDC
+
-
clip
GAIN
6 dB 50
CHANNEL 1 - RIGHT CHANNEL 2 - LEFT
BALANCED BALANCED
INPUT
OUTPUT
INPUT INPUT
MONO
BALANCED
CH1 & 2
COMBINED
OUTPUT
TRS
CH1 RIGHT
CH2 LEFT
STEREO
OUTPUT
Female XLR jack
for signal input.
Channel 1 and 2 are identical in operation and features
Mono XLR output: This is
a mono summed output for
both left and right outputs.
Stereo TRS 1/8” output: Chan-
nel 1 is on the right output and
channel 2 will be on the left.


Produktspezifikationen

Marke: Rolls
Kategorie: Nicht kategorisiert
Modell: MP213

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rolls MP213 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Rolls

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-