Rocstor Y10E034-B1 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rocstor Y10E034-B1 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
®
1U 19in Wall Mount Bracket for Patch Panels - Hinged - Black
User Manual
Y10E034-B1
© 2022 Rocstor is registered trade mark of Rocstorage, Inc. Any unauthorized copying, duplicating, or other reproduction of the contents hereof
is prohibited without written consent from Rocstor. All rights reserved. Other trademarks are property of their respective owners.
Introduction & Installation
Page 1
Equipment Installation to the Wall-Mount Bracket
Included in this mounting bracket, you will nd M6 Cage Nuts, Screws, and Plastic Washers. Use
these to install equipment into the Wall-Mount Bracket.
1. Use the Wing (side) of an M6 Cage and insert it into the back of the Cage Nut hole.
2. Use a Cage Nut Tool or hand to apply pressure to insert a 2nd Wing of the M6 Cage Nut into a
designated Cage Nut Hole. Please repeat steps 1 and 2 by inserting the remainder of the Cage Nuts
for your application.
3. Make sure you use the Threaded Plastic Washer over the M6 Screw.
4. At this time use the M6 Cage Nuts and align the Mounting Holes in the equipment and apply
the Cage Nuts in step 2.
5. Now please insert the assembled Screws through the Mounting Holes in the Equipment and
into the M6 Cage Nuts.
6. Make sure the Screws are Tightened by using a Phillips Screwdriver.
Wall-Mount Bracket Installation
Warnings:
Rocstor recommends viewing your wall structure rst before installing the bracket. You may want to
consult or have a professional installer to mount the bracket to your wall structure. The bracket must
be installed on a wall structure that is able to support the mounted equipment properly. The wall
structure should be able to support at least four times the weight of the installed mounted
equipment. Make sure the wall-mount bracket is securely installed before you mount any
equipment. Failure to mount the bracket securely, it may result in personal and/or equipment
damages.
Mounting Holes
Hinged Side Panel
Cage Nut Holes
Measurements & Package Content
Page 2
Package Contents
• 1U Wall-Mount Bracket x 1
• M6 Screws x 4
• M6 Cage Nuts x 4
• Plastic Washers x 4
• Wall Screws x 2
• Plastic Anchors x 2
• User Manual x 1
406
500
44.4
465
500
100
153.4
153.4
Units Dimension (Millimeter):


Produktspezifikationen

Marke: Rocstor
Kategorie: Nicht kategorisiert
Modell: Y10E034-B1
Breite: 500.1 mm
Tiefe: 153.4 mm
Gewicht: 1000 g
Produktfarbe: Schwarz
Höhe: 44.4 mm
Höchstgewichtskapazität: 8 kg
Verpackungsbreite: 204.7 mm
Verpackungstiefe: 23.6 mm
Verpackungshöhe: 66.9 mm
Paketgewicht: 1230 g
Zertifizierung: EIA/ECA-310-E
Typ: Montageschelle
Gehäusematerial: Stahl
Nachhaltigkeitszertifikate: RoHS
Rack-Kapazität: 1U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rocstor Y10E034-B1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Rocstor

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-