Rocky Mountain RMR-D210 Bedienungsanleitung

Rocky Mountain Detektor RMR-D210

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Rocky Mountain RMR-D210 (2 Seiten) in der Kategorie Detektor. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

1. Introduction

Dear Rocky Mountain Radar Owner,

Congratulations on your purchase of one of the world’s most sophisticated

radar/laser detectors. The RMR-D210 is a completely integrated radar/laser

detector which responds not only to all the radar guns in use today, including

“Stalker”, but also to the other latest development in speed monitoring devices-

the laser gun.

This model provides distinct visual and audible alerts to warn you of the

presence of X, K, and all kinds of Ka Band radar guns in the front and

rear of you. This model also provides the benefit of ‘undetectability’ by

alerting you to the presence of VG-2 (‘The Radar Detector detector’).

It also incorporates a new safety feature - Safety Alert(SA) and Safety

Warning System(SWS).

This safety feature warns you of the presence of

potential road hazards by detecting signals from safety radar

transmitting devices.

Note :

Important : The RMR-D210 is not designed to help you disobey the

law. A defensive driver always obeys the posted speed limit and legal

driving methods.

Federal and Local Regulations

The FCC passed the Communications Act in 1934 to give all citizens

the right to receive all types of radio transmissions. The same radio

frequencies used by police radar are also used by other devices, such

as automatic door openers, burglar alarms, and some amateur radio

equipment. Since the RMR-D210 is just a radio receiver tuned to a

specific portion of the public radio spectrum, it is protected under this

act.

Some local, state, and federal regulations may prohibit the use of this

detection device. Please check with authorities regarding the use of

this device before operating it.

2. Control and Features

1) Included with your Radar Detector

Hook and Loop Fastener Tape

Power Cord

Spare Fuse

RMR-D210 Windshield Bracket with

Suction Cups

2) Controls and Functions

a. On/Off Volume Control

b. Dim Button

c. Mute Button

d. City Button

e. DC 12V Power Input Jack

f. Radar Antenna

g. Front Laser Detection Lens

h. Rear Laser Detection Lens

Receives incoming laser signals from rear

i. Power-On Indicator

j. X Band Indicator

k. K/Ka Band Indicator

l. City Indicator

m. Laser and VG2

1 2 3 4

RMR-D210

Advanced Micro Technology Design

360 Degree / Safety / Radar Detector

b c d

3. Installation

1) Mounting Guidelines

For the best performance, select the proper location for the unit

where it has a direct view of the road. The radar antenna is located

behind the rear panel of the unit and the laser detection lenses are

located behind the rear panel of the unit and the front window. The

antenna and sensors should not be obstructed by metal or metallic

surfaces and should be pointed at the horizon for accurate long

range detection.

·Choose a location that does not block the driver’s vision.

·Mount the detector in a level position.

·Do not mount the detector behind metal surfaces, windshield

antenna, wiper blades, ornaments, or mirrored glass.

·Heated windshields, currently available as an option on some Ford

(Instaclear) or GM(electriclear) vehicles act as an impenetrable

barrier to radar signals.

·Do not mount the detector where the driver or passenger might

collide in the case of an abrupt halt.

N o t e : Whichever mounting method you choose, remember to

place the radar detector out of view when you leave your

vehicle.

This keeps the detector out of sight from thieves and

prevents exposure to extremely high temperatures.

N o t e : If necessary, you may adjust the bracket to the proper angle

by bending it. To remove your detector, pull up the detector

from the front pulling it towards you.

Caution : On some newer model cars, a plastic safety coating has

been applied to the windshield. The suction cups may leave

permanent marks on the windshield once they are removed.

Check your vehicle owner’s manual to see if your car has

the plastic safety coating.

2) Mounting Types

A. On Windshield

a. Attach bracket to windshield.

b. Bend bracket for correct detection angle.

c. Plug Power cord into detector.

d. Attach bracket to detector.

e. Plug power cord into cigarette lighter.

B. On Dashboard

a. Peel protective paper off one

side of hook-loop.

b. Tape on detector’s bottom.

c. Peel top paper off.

d. Place detector on dashboard.

e. Plug power cord into detector and cigarette lighter.

3) Power Connection

The coiled power cord provided with the unit has a cigarette lighter

socket plug at one end and a small connector on the other.

1. Insert the small connector into the jack on the side of the unit.

2. Insert the other end into the cigarette lighter socket of your vehicle.

If the detector does not operate when you turn it on, remove the

adapter from the cigarette lighter socket and carefully check the

socket for debris. Also, check the fuse in the adapter and your

vehicle fuse box.

4) Replacing Fuse

a. To replace the fuse, unscrew the top of the plug.

b. Remove and check the fuse to see if it has blown, If it has, replace it.

4. Operation

1) Power and Volume Control

Turn on and adjust volume.

Note : Turning on the detector will trigger the Self-Test mode.

2) Dim Mode

·Press Dim Button.

→An audible warning sound will alert you that Dim mode

has been activated.

Each time you press Dim button, display intensity will

change dim, dark, bright.

5 6 7 8

ROCKY

MOUNTAIN

R ▲D▲ R

EI Paso, TX.

6469 Doniphan

El Paso, TX 79932

(915)587.0307

fax(915)587.6408

Owner’s Manual

ROCKY MOUNTAIN RADAR

5. Care and Maintenance

Your Rocky Mountain radar detector is an example of

superior design and craftsmanship.

The following suggestions will help you care for your detector

so you can enjoy it for years.

·Never leave your detector on the windshield or dashboard

when your vehicle is left parked. The temperature in the

vehicle durning the summer can reach levels above what is

considered to be safe for this detector.

·To make you less susceptible to break-in and theft, remove

the detector from your windshield or dashboard when leaving

your vehicle.

·Do not expose the detector to moisture, rain, dew, road

splash, or other liquids that can damage the internal

components and reduce the sensitivity of the detector.

6. Troubleshooting

If the detector does not turn on:

·Check the power cord. Be sure all power connectors are properly

installed.

·Check the fuse that controls the power to the cigarette lighter

socket.(See your vehicle’s owner’s manual for reference.)

·The cigarette lighter socket might be dirty. Clean it with a fine

emery cloth to ensure a good, clean connection.

·There might be a problem with the vehicle’s electricity.

·Make sure that the volume control is in the ON position.

Caution : Do not place any metal objects other than the cigarette

lighter or a cigarette lighter plug in the cigarette lighter

socket. Doing so could blows a fuse in your vehicle or

cause the metal object to become very hot.

If the detector gives a false alert when the vehicle hits bumps:

· ’Check the vehicles electrical system, including main battery cable

and alternator connections.

·㎌Install a filter capacitor (470 , 35volts) on the back of the cigarette

lighter socket, across the power connection.

If the receiving signal is weak:

·Check the angle of the detector. (Place it on the point of horizon.)

·Radar antenna/laser sensor is obstructed.

(Relocate the detector clear of any obstruction outside the

windshield, such as a wiper blade.)

·Relocate the detector clear of the window tint.

7.Specification

RADAR

Receiver Type : Dual conversion Superheterodyne

Antenna Type : Linear polarized, Self-Contained Antenna

Detector Type : Scanning Frequency Discriminator

Frequency of Operation : 10.525GHz/± 50MHz(X-Band)

24.150GHz/ 100MHz(K-Band)±

34.700GHz/ 1,300MHz±

(Ka Super Wideband)

LASER

Receiver Type : Pulsed Laser Signal Receiver

Detector Type : Digital Signal Processor Pulse

Width Discriminator

Opto Sensor : Dual Convex Condenser Lens and High Speed

Photo Diode Detector

Spectral Response : 800 ~ 1,100nm

GENERAL

Temperature Range : -4 to 158 (-20 to 70℉ ℃)

Power Requirements : 12 ~ 15V DC, 80㎃nominal

(Negative Ground)

Dimensions(HWD) 1.1” x 2.5” x 3.6”

Weight : 2.2oz

Specifications are typical : individual units might vary.

Specifications are subject to change without notice.

Warranty

WARRANTY

This unit guaranteed against defects in workmanship and

materials for one year. Should you experience any difficulty

with the RMR-D210 during this time, the unit will be repaired or

replaced at no charge. Should you desire to have your unit

checked, there will be no additional charge other than postage

and handling. After the warranty period expires, the unit may

be returned for service and it will be reconditioned for ＄25.00

15 16 17 1814

4. Operation

3) City / Highway Mode

·Press the Button.

→“City” LED turns on for “City” Mode.

4) Mute Mode

·Press Mute Button.

→Silences the Audio.

Note : Press button again to restore audio alarm.

5) VG-2 Select

·Hold down the Mute button for three seconds.

The RMR-D210 will disengage VG2 feature with beep sound.

Press Mute button again for three seconds.

The RMR-D210 will engage VG2 feature with three beeps.

The factory default is “VG2 On”.

6) Indicator and Visual

a. Power On

฀“P” LED turns on.

b. X Band Detection

฀“X” LED turns on with audible tone.

c. K/Ka Band Detection

฀“K/Ka” LED turns on with audible tone.

d. Laser Alarm

฀“L/V” LED and “X, K/Ka” LEDs flash with audible tone.

If the unit detects the laser signal when the City mode is

engaged, ALL LEDs will flash with audible tone.

e. VG2 Alarm

฀“L/V” LED flashes with audible tone.

7) Feature Memory

The RMR-D210 will automatically “Remember” your

settings when the unit is turned off or removed from the

power. All features selected are retained in memory-

Dim/Dark, City/Highway, VG2 and mute.

8) Feature Engage Confirmation

Each time a button is pressed two beeps confirm feature

“On”, one beep confirms feature “Off”.

109 11 12 13

ACCESSORIES

Accessories are available as follows:

Windshield mount ＄5.00

Power Cord ＄5.00

Suction cups(set of two) ＄2.00

2amp fuses(two ea.) ＄2.00

Replacement owner’s manual ＄3.50

Add ＄10.00 shipping and handling per shipment

CAUTION

Tampering with unit

will result in a ＄75.00 repair fee!

WE DO NOT ACCEPT COD SHIPMENT

ROCKY MOUNTAIN RADAR

6469 DONIPHAN DRIVE

EL PASO, TX 79932

915.587.0307

915.587.6408(FAX)

FCC Information

This product has been designed and certified to comply

with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any

interference received, including interference that may

cause undesired operation.

Any changes or modifications not expressly approved by

Rocky Mountain Radar may void your authority to use this

product.

Produktspezifikationen

Marke:	Rocky Mountain
Kategorie:	Detektor
Modell:	RMR-D210

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rocky Mountain RMR-D210 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Detektor Rocky Mountain

Rocky Mountain DLS315 Bedienungsanleitung

2 September 2024

Rocky Mountain RMR-D210 Bedienungsanleitung

2 September 2024

Bedienungsanleitung Detektor

Neueste Bedienungsanleitung für -Kategorien-

Alecto HA-58 Bedienungsanleitung

4 Oktober 2024

Amprobe ULD-400-T Bedienungsanleitung

1 Oktober 2024

Hager EE809 Bedienungsanleitung

22 September 2024

DSC RM-2 Bedienungsanleitung

14 September 2024

K40 Platinum200 Expert Bedienungsanleitung

12 September 2024

K40 Platinum360 Expert Bedienungsanleitung

12 September 2024

K40 RL200di Bedienungsanleitung

12 September 2024

Noyafa NF-820 Bedienungsanleitung

6 September 2024

STI BIO-7505 Bedienungsanleitung

6 September 2024

Soler & Palau CPTA Bedienungsanleitung

6 September 2024