Robbe Pilatus PC21 Bedienungsanleitung

Robbe Funkgesteuertes Spielzeug Pilatus PC21

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Robbe Pilatus PC21 (34 Seiten) in der Kategorie Funkgesteuertes Spielzeug. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/34
Building and Operating Instructions
Notice de montage et de mise en œuvre
Istruzioni di montaggio e d’uso
Pilatus PC21
Nano-Racer
No. 2599
Building and Operating Instructions - Pilatus PC21 Nano-Racer No. 2599
2
Dear customer,
Congratulations on your choice of a factory-assembled
model aircraft from the robbe Modellsport range. Many
thanks for placing your trust in us.
The model can be ready for the air when you have completed
just a few simple procedures. Please read right through
these instructions and the separate information sheets
before attempting to assemble and fly the model, as this will
make it much easier to complete the tasks required.
Please study the illustrations and the brief instructions to
obtain a clear understanding of the individual stages of
construction. All parts must be trial-fitted “dry” (without glue)
before you reach for the glue. Assign the individual compon-
ents to the various stages of assembly.
The servos are already installed, and connected to the con-
trol surfaces.
The model
Semi-scale model of a fast aerobatic trainer.
The PC 21 is a member of the Nano-Racer series, and con-
sists of a painted, one-piece, moulded foam fuselage and
wing, reinforced with a carbon fibre spar. The model boasts
outstanding flying qualities, and is perfectly 'at home' at high
speed and flying aerobatics. With its robust but lightweight
construction the model is fully capable of exploiting its advan-
tages at both ends of the speed spectrum. The set includes
a powerful brushless motor with speed controller and three
servos, all factory-installed.
We constantly strive to update our products to reflect the
latest developments. You can find details of technical
improvements, updates and revised documentation on
the Internet by calling up the appropriate product
description at our website: www.robbe.com.
Specification:
Total surface area approx.: 9 dm2
All-up weight approx.: 390 g
Wing loading approx.: 45.5 g/dm2
Length approx.: 711 mm
Wingspan approx.: 622 mm
Scale: 1:14.6
RC functions:
Elevator, aileron, throttle, rudder (optional)
Notes regarding the radio control system:
For this model you require a radio control system with at least
four channels.
The receiving system is powered by the speed controller’s
integral BEC system.
Set contents:
• Set of painted EPO foam components, with decals applied
(fuselage / wing, fin, tailplane, fuselage hatch incl. cockpit)
• Painted plastic cowl
• Factory-fitted brushless motor and speed controller
• 5.5 x 4.5" propeller, spinner and driver
• 3 x servos installed
• Multi-lingual assembly instructions
Essential accessories:
Description Order No.
Adhesive: Robbe Speed Type 2 5063
Optional accessories:
Rudder upgrade kit for Nano-Racer 2600
Please see the robbe main catalogue for details of tools and
accessories.
Servo leads with differing colour codes are used in the model:
Signal: white / orange
Positive wire: red / red
Negative wire: black / brown
Please bear this in mind when connecting or extending the leads.
Before you check the model's working systems, set the con-
trol surfaces to neutral from the transmitter (transmitter sticks
and trims central).
When you wish to fly the model always move the throttle stick
to the “motor stopped” position before switching the trans-
mitter on. Only then connect the battery. To switch off, first
disconnect the flight pack from the speed controller, and only
then switch the transmitter off. When installing or setting up
the receiving system components, including the speed cont-
roller and motor, be sure to read and observe the instructions
supplied with them. You should also read right through the
instructions and safety information supplied with the battery
pack and charger before using these items for the first time.
Preparing the glued joints:
Use 240-grit abrasive paper to sand the paint from all joint
surfaces before applying the glue.
All directions, such as “right-hand”, are as seen from the
tail of the model, looking forward.
Replacement parts:
Order No. Description
25990001 Pilatus PC21 Nano-Racer cowl
25990002 Pilatus PC21 Nano-Racer linkage set
25990003 Pilatus PC21 Nano-Racer spinner
25990004 Pilatus PC21 Nano-Racer motor mount set
25990005 Pilatus PC21 Nano-Racer canopy
25990006 Pilatus PC21 Nano-Racer decals

Produktspezifikationen

Marke: Robbe
Kategorie: Funkgesteuertes Spielzeug
Modell: Pilatus PC21

Brauchst du Hilfe?

Wenn Sie Hilfe mit Robbe Pilatus PC21 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Funkgesteuertes Spielzeug Robbe

Robbe

Robbe Air Beaver Bedienungsanleitung

31 August 2024
Robbe

Robbe 1-F1666 Bedienungsanleitung

31 August 2024
Robbe

Robbe ROXXY BL-Control 975-12 Bedienungsanleitung

31 August 2024
Robbe

Robbe Pilatus PC21 Bedienungsanleitung

31 August 2024
Robbe

Robbe Arcus Bedienungsanleitung

31 August 2024
Robbe

Robbe Arcus II Bedienungsanleitung

31 August 2024
Robbe

Robbe Nano-Vector Bedienungsanleitung

31 August 2024
Robbe

Robbe 5800 Bedienungsanleitung

31 August 2024
Robbe

Robbe Grob G 120TP Bedienungsanleitung

31 August 2024
Robbe

Robbe ROXXY Bl-Control 810 Bedienungsanleitung

31 August 2024

Bedienungsanleitung Funkgesteuertes Spielzeug

Neueste Bedienungsanleitung für -Kategorien-

Proline

Proline Trencher Bedienungsanleitung

4 Oktober 2024
Futaba

Futaba 12Z Bedienungsanleitung

4 Oktober 2024
Graupner

Graupner 33718.XT60 Bedienungsanleitung

3 Oktober 2024
Amewi

Amewi Hyper Go Bedienungsanleitung

1 Oktober 2024
Carson

Carson Drift Burner Bedienungsanleitung

1 Oktober 2024
Carson

Carson Micro X-Warrior 2.0 Bedienungsanleitung

1 Oktober 2024
Biltema

Biltema 45-8119 Bedienungsanleitung

1 Oktober 2024
Traxxas

Traxxas Stampede Bedienungsanleitung

29 September 2024
Hobbywing

Hobbywing XeRun XR10 Pro WP Bedienungsanleitung

25 September 2024
Hobbywing

Hobbywing XeRun XR10 Stock Spec G2 Bedienungsanleitung

25 September 2024