RIKON 10-342EVS Bedienungsanleitung
RIKON
Zaagmachine
10-342EVS
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für RIKON 10-342EVS (40 Seiten) in der Kategorie Zaagmachine. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/40
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock, îš¿re,
and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modiîš¿ed and/
or used for any other application other than that for which it was designed. If you have any questions about its application,
do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its speciîš¿c potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. Some dust created by using power
tools contains chemicals known to the State of California to
cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• masonry products.
• Arsenic and chromium from
chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area and work
with approved safety equipment, such as those dust masks
that are specially designed to îš¿lter out microscopic
particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. If the tool is supplied with a 3 GROUND ALL TOOLS.
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions on
the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gasses.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area, especially
when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and higher
quality job by only performing operations for which the tool
was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can get
caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to prevent it
from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by removing
switch keys, unplugging tools from the electrical
receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjustments,
changing parts or performing any maintenance.
3
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used in
conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or moderate injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.
Produktspezifikationen
Marke: | RIKON |
Kategorie: | Zaagmachine |
Modell: | 10-342EVS |
Brauchst du Hilfe?
Wenn Sie Hilfe mit RIKON 10-342EVS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zaagmachine RIKON
31 August 2024
Bedienungsanleitung Zaagmachine
- Zaagmachine Brennenstuhl
- Zaagmachine Cotech
- Zaagmachine Makita
- Zaagmachine Bosch
- Zaagmachine Flex
- Zaagmachine Parkside
- Zaagmachine Vonroc
- Zaagmachine AEG
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine FERM
- Zaagmachine Ryobi
- Zaagmachine Skil
- Zaagmachine Topcraft
- Zaagmachine Trotec
- Zaagmachine Maestro
- Zaagmachine Prime3
- Zaagmachine Hilti
- Zaagmachine Bort
- Zaagmachine DeWalt
- Zaagmachine Einhell
- Zaagmachine Festool
- Zaagmachine Mafell
- Zaagmachine Worx
- Zaagmachine Tacklife
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Hyundai
- Zaagmachine Fuxtec
- Zaagmachine Max
- Zaagmachine Metabo
- Zaagmachine Stanley
- Zaagmachine Atika
- Zaagmachine Güde
- Zaagmachine Power Craft
- Zaagmachine Scheppach
- Zaagmachine Workzone
- Zaagmachine Biltema
- Zaagmachine Meec Tools
- Zaagmachine Dremel
- Zaagmachine Fieldmann
- Zaagmachine Westfalia
- Zaagmachine Remington
- Zaagmachine Husqvarna
- Zaagmachine Stihl
- Zaagmachine Dedra
- Zaagmachine DURO
- Zaagmachine Graphite
- Zaagmachine Pattfield
- Zaagmachine Silverline
- Zaagmachine Holzmann
- Zaagmachine Florabest
- Zaagmachine Stiga
- Zaagmachine Hammer
- Zaagmachine ACG
- Zaagmachine Greenworks
- Zaagmachine Huvema
- Zaagmachine Robust
- Zaagmachine Zipper
- Zaagmachine Baumr-AG
- Zaagmachine Genesis
- Zaagmachine BluCave
- Zaagmachine Morrison
- Zaagmachine Batavia
- Zaagmachine Evolution
- Zaagmachine Matrix
- Zaagmachine Dolmar
- Zaagmachine Bavaria
- Zaagmachine Milwaukee
- Zaagmachine Toolcraft
- Zaagmachine Fein
- Zaagmachine AL-KO
- Zaagmachine CMI
- Zaagmachine IDEAL
- Zaagmachine Cobra
- Zaagmachine Verto
- Zaagmachine Craftsman
- Zaagmachine Powerplus
- Zaagmachine Alpha Tools
- Zaagmachine Elektra Beckum
- Zaagmachine McCulloch
- Zaagmachine Ozito
- Zaagmachine Yard Force
- Zaagmachine Sun Joe
- Zaagmachine Solo
- Zaagmachine Texas
- Zaagmachine Ridgid
- Zaagmachine Porter-Cable
- Zaagmachine VARO
- Zaagmachine Spear & Jackson
- Zaagmachine Duro Pro
- Zaagmachine Ferrex
- Zaagmachine FOM
- Zaagmachine Gamma
- Zaagmachine Gardenline
- Zaagmachine Global
- Zaagmachine Goon
- Zaagmachine Gude Pro
- Zaagmachine HURRICANE
- Zaagmachine Lux Tools
- Zaagmachine Max Bahr
- Zaagmachine Maxx
- Zaagmachine Qualcast
- Zaagmachine Tanaka
- Zaagmachine Toolson
- Zaagmachine Wolfcraft
- Zaagmachine Masport
- Zaagmachine Garland
- Zaagmachine Meister Craft
- Zaagmachine Clarke
- Zaagmachine Sovereign
- Zaagmachine Challenge Xtreme
- Zaagmachine MacAllister
- Zaagmachine Jonsered
- Zaagmachine Einhell Bavaria
- Zaagmachine Proviel
- Zaagmachine Tryton
- Zaagmachine MTM
- Zaagmachine MyTool
- Zaagmachine McKenzie
- Zaagmachine Anova
- Zaagmachine Yellow Garden Line
- Zaagmachine Ergotools Pattfield
- Zaagmachine IKRA
- Zaagmachine FIXIT
- Zaagmachine Bestgreen
- Zaagmachine BGU
- Zaagmachine Ultranatura
- Zaagmachine TAURUS Titanium
- Zaagmachine Maxbear
- Zaagmachine Extralink
- Zaagmachine Stalco
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
18 September 2024
18 September 2024
17 September 2024
17 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024