RetroSound WPA1 Bedienungsanleitung

RetroSound TV-Antenne WPA1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für RetroSound WPA1 (2 Seiten) in der Kategorie TV-Antenne. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

WPA1 Antenna

Installation

The WPA1 antenna is designed to mount inside your vehicle when you are not using

a traditional fender mount antenna.

1. Place the main body of the WPA1 as high in the dash as possible or using the

adhesive backing secure to the upper windshield or rear glass. Avoid placing it

near any high-current wiring.

Glass installation: Clean the mounting area with an alcohol wipe. Using a lint-free rag,

clean any residue off the window. Peel backing off the adhesive strip and press firmly to

the glass surface. Be careful not to press too hard on windshield applications.

2. Ground the WPA1 to a clean metal point close to its body with the small braided

cable and eyelet.

3. Route the antenna cable with the thin black power wire to your radio location.

Connect the thin black wire to a 12-volt ignition source or the blue power antenna

output wire of your RetroSound® radio.

4. Connect the male antenna plug into the female antenna receptacle of your radio.

www .com.retromanufacturing

Installation Guide

WPA1

Enhanced Amplied

Hide-away Antenna

Warranty

Your unit comes with a manufacturer's warranty covering any defects in materials and workmanship.

Retro Manufacturing, LLC (collectively referred to as "the warranter"), at its option, will either (a)

repair your unit with new or refurbished parts or (b) replace it with a new or refurbished unit. The

warranty period starts from the original purchase date and is valid for the length of time indicated in

the chart below. The decision to repair or replace will be made by the warranter.

ITEM WARRANTY

Antennas One (1) Year

During the "Parts" warranty period, there will be no charge for parts. You must mail in your

unit during the warranty period at your expense. This warranty only applies to products

purchased directly from Retro Manufacturing or an authorized dealer. This warranty

is extended only to the original purchaser of a new product that was not sold "as is."

A purchase receipt or other proof of the original purchase date is required for warranty service.

To handle a warranty issue, contact us at or tech@retromanufacturing.com 888.325.1555 for a

Return Authorization (RA) number. A RA number must accompany all returns and warranty issues.

Any product received without a RA number will be refused.

LIMITED WARRANTY-LIMITS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials and workmanship and DOES

NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER

damages that occurred during shipment, failures which are caused by products not supplied

by the warranter, failures that result from accident, misuse, abuse, neglect, bug infestation,

mishandling, misapplication, alteration, faulty installation, set-up adjustment, maladjustment of

consumer control, improper maintenance, improper antenna, inadequate signal reception or

pickup, power line surge, improper voltage supply, lightning, modification, commercial use (such as

use in hotels, offices, restaurants, or other business uses) or rental use of the product, or service

by anyone other than Retro Manufacturing, LLC, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY.

THE WARRANTER IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THIS UNIT OR ARISING OUT OF ANY BREACH OF

THIS WARRANTY. (As examples, this excludes damages for lost time, the cost of having

someone remove or re-install an installed unit if applicable, travel to and from the servicer, and

loss of media, data, or other memory contents. The items listed are not exclusive but are for

illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY

OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages or

limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This

warranty gives you specific legal rights, and you may also have other rights which vary from state to

state. If a problem with this unit develops during or after the warranty period, you may contact your

dealer or Retro Manufacturing, LLC.

7470 Commercial Way

Henderson, NV 89011

www.retromanufacturing.com

Produktspezifikationen

Marke:	RetroSound
Kategorie:	TV-Antenne
Modell:	WPA1

Brauchst du Hilfe?

Wenn Sie Hilfe mit RetroSound WPA1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung TV-Antenne RetroSound

RetroSound PA-01 Bedienungsanleitung

20 August 2024

RetroSound WPA1 Bedienungsanleitung

19 August 2024

RetroSound Retro Antenna PA04 Bedienungsanleitung

18 August 2024

RetroSound PA-02 Bedienungsanleitung

18 August 2024

RetroSound PA-03 Bedienungsanleitung

18 August 2024

RetroSound HPA-1 Bedienungsanleitung

26 Mai 2024

RetroSound MC-8207 Bedienungsanleitung

2 Mai 2024

RetroSound RetroAntenna PA04 Bedienungsanleitung

3 Juli 2023

Bedienungsanleitung TV-Antenne

Neueste Bedienungsanleitung für -Kategorien-

Thomson ANT1538BK Bedienungsanleitung

16 Oktober 2024

One For All SV 9482 Bedienungsanleitung

9 Oktober 2024

Uniden AW880BKL Bedienungsanleitung

4 Oktober 2024

One For All SV 9435 Bedienungsanleitung

30 September 2024

Uniden ATX970W Twin Bedienungsanleitung

18 September 2024

TP-Link TL-ANT5819MS Bedienungsanleitung

18 September 2024

TP-Link TL-ANT24EC6N Bedienungsanleitung

11 September 2024

One For All SV 9430 Bedienungsanleitung

7 September 2024

EMOS J0704 Bedienungsanleitung

5 September 2024

Sencor SDA 102 Bedienungsanleitung

4 September 2024