Rega RB220 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Rega RB220 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
USER MANUAL
RB
RB
RB
RB
220
INTRODUCTION
The RB220 uses Rega’s custom one piece, aluminium arm tube,
carefully manufactured to optimise performance and reduce
stress on the Rega designed polymer bearings (patent pending).
Each tonearm is meticulously hand assembled using custom
Rega made tools and torque settings to guarantee optimum
performance. This level of care ensures perfect tracking and
maximises the amount of information the cartridge can extract
from the record surface.
The RB220 has adjustable bias allowing greater compatability
with a wide range of cartridges. The Rega designed bias system
will adjust the amount of bias as the tonearm tracks the record
ensuring even tracking during playback.
This Rega tonearm is a precision crafted product. To create
the low friction levels and meet minimum mass requirements,
many parts of the arm are delicate and require careful handling.
The arm should always be treated with respect and under no
circumstances should any part be removed or tampered with.
Any attempt to modify or repair this product, other than by an
ofîś·cial Rega retailer listed on www.rega.co.uk, will invalidate the
lifetime warranty.
ARM BALANCING AND SETUP
With the cartridge îś·tted and aligned using the alignment
protractor supplied, set the bias slider to 0 (with the stylus
guard removed) and screw the balance weight along its shaft (A)
until the stylus is “oating” approximately 1 mm clear of the
record. The recommended tracking force can now be applied by
rotating the balance weight so that it moves towards the front
of the arm. A half turn (through 180 degrees) generates 1 gram
of tracking pressure (turning the weight 360 degrees will apply
2 grams). Use the plastic inserts found on the weight as a visual
guide.
Set the tracking weight to the upper limit of the suggested
tracking weight provided by your cartridge manufacturer’s
guidelines. Once balanced, set the bias slider (A) to the same
îś·gure as the recommended tracking force supplied by your
cartridge manufacturer. Your Rega RB220 tonearm is now ready
for use.
If you have any doubts regarding correct setup or îś·tment of this
arm please contact your ofîś·cial Rega dealer who will be able to
carry out the work for you.
Thank you for purchasing this Rega product and we wish you
many years of musical enjoyment.
A
BALANCE
WEIGHT
CUEING DEVICE
LIFT/LOWER
HANDLE
ARM CLIP
FINGER LIFT
(1:4 scale)
HEADSHELL
PROTRACTOR AND
ARM MOUNTING
DATA INCLUDED.
CUEING
PLATFORM


Produktspezifikationen

Marke: Rega
Kategorie: Nicht kategorisiert
Modell: RB220

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rega RB220 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Rega

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-